mortise lockset price list - Mfsales.com

Custom Locksets
66
SERIES HA113 CUSTOM LOCK DIVISION
HOUSING AUTHORITY MORTISE LOCKSET
SERIES HA113
FINISH
GROUPS
MARKS # FUNCTION ANSI # 20A
KEYED SINGLE CYLINDER, NO DEADBOLT
D OFFICE VESTIBULE
DW VESTIBULE
E OFFICE F04
EW STOREROOM F07 485
GL INST. PRIVACY F26
J CLASSROOM F05
JM, JR HOSPITAL (HOLDBACK) F06
EL
EU
ELECTRICALLY LOCKED
ELECTRICALLY UNLOCKED
966
KEYED SINGLE CYLINDER, WITH DEADBOLT
A ENTRANCE F08, F10
B ENTRANCE F21
F DORMITORY F12 498
FS DORMITORY
FW DORMITORY F13
FD APARTMENT F20
H HOTEL F15 533
LH SPEC. PRIVACY
KEYED DOUBLE CYLINDER, NO DEADBOLT
G ENTRANCE F09
GC INTRUDER LATCHBOLT F32
GG CLASSROOM SECURITY
533
GR CLASSROOM SECURITY w/HOLDBACK
WW INSTITUTION F30
KEYED DOUBLE CYLINDER, WITH DEADBOLT
AC ENTRANCE F35
C STOREROOM F14
FC INTRUDER DEADBOLT F34 533
FA DORMITORY F11
FX
KEYLESS
DORMITORY F33
N PASSAGE F01 424
L
LF
BATHROOM
PRIVACY
F02
F19
469
LJ PRIVACY F22 515
EX EXIT F31 485
For pricing, finishes and availability, consult factory
Performance Specifications:
Life Test: 1,500,000 cycles minimum.
ANSI Test: Meets or exceeds all operational and security tests of ANSI
specifications A156.13-2005 for series 1000, Grade 1.
Fire Test: UL Listed, 3 hour fire rated.
Meets ADA requirements.
Trim Specifications:
“Barrier” Thru-bolted steel lever/plate assemblies with brass machined
lever bearings. Screwless, forged, American levers, 4-1/2" long, to meet
ADA requirements, fastened to plates with hardened snap rings. Spring
loaded 5/16" spindles (no set screws). Dark bronze powder coated finish.
Exterior: Wrought steel lever/plate assembly.
10-1/8" x 4" x 5/64" with 3 concealed welded thru-posts.
Center post braces lock body for proper alignment in
1-3/4" thick door. Plate covers cylinder with only the
keyway exposed.
Optional Exterior: Plate prepared for IC core cylinder.
Interior: Flat steel lever/plate assembly. 10-3/4" x 3-1/8" x 3/32"
thick with 3 each 1/4"-20 mounting bolts. Center bolt
passes through lock body to integrate trim with lock.
Cylinder: 1-1/8" long, 6 pin, solid brass with spacing collar
concealed under exterior “Barrier” plate; 2 keys.
Strike: 4-7/8" x 1-1/4" x 3/32" thick, 5/8" curved lip.
Conforms to ANSI spec., A115.1.
Door Thickness: 1-3/4" standard. Extended range available.
Lock Specifications: 5 Series (2-3/4" Backset)
1. Lock Front: Adjustable bevel steel backplate 1-1/4" x 8" x 7/64" thick.
Cover plate 1/16" thick.
2. Deadbolt: Stainless steel w/hardened roll pins, 1" throw.
3. Latch: Solid stainless steel with antifriction latch lever, 3/4" throw (reversible).
4. Auxiliary deadlatch: 1/2" throw (reversible) - (not shown).
5. Hubs: Steel, 9/32" on diamond, 5/16" on square w/security separator.
6. Independent exterior and interior lever support springs.
7. Hub Follower: (to lock hub) steel 1/8" thick.
8. Hub Stop: (to limit lever travel) steel 1/8" thick.
9. Case: Stamped steel 3/32" thick, zinc dichromate finish.
10. Spindles: Independent spring-loaded spindles, 5/16" square.
FOR ADDITIONAL DESIGNS, ASK FOR THE CUSTOM LOCK DIVISION CATALOG OR VISIT OUR WEBSITE @ WWW.MARKSUSA.COM
631-225-5400 • 1-800-526-0233 • Fax 631-225-6136 • ©2009 MARKS USA