The Lock Catalogue

SSF guarantees that the mortice locks
for hollow profiled section doors meet
the guidelines of DIN 18251-2, Class 3.
SSF locks for hollow profile section doors
have been tested and certified according
to the European standard EN 12 209 by
the MPA NRW in Dortmund / Germany.
Test certificate no. 120002640.Z3, June
2008.
Moreover, the locks of the product line 02
with the panic functions APE /APB / APD
have been tested and certified according
to the European standard for panic locks
EN 1125 and for emergency exit locks
EN 179 by the PIV Test Institute Locks &
Fittings in Velbert.
EC Certificate of Conformity
1309 - CPD - 0099 (EN 1125)
EC Certificate of Conformity
1309 - CPD - 0098 (EN 179)
(Attention: The individual furnitures assessed
for the certification are always to
be considered for panic and emergency
exit locks.)
The classification codes are assigned to
the corresponding lock models on the
individual catalogue pages. See page 92
for the explanation of the classification
code.
SSF locks for hollow profile section
doors are equipped with a clamping
follower and the latch bolt is reversible
for right and left hand application. The
galvanized lock case closed at the top
and bottom is provided with sleeved bolt
through fixing points.
Mortice locks
for hollow profiled section doors 5
A special feature of all SSF locks for hollow
profile section doors is the additional
mounting opening for the stable, boldthrough
furniture installation.
Please inform about the different functional
options of the panic bolt locks, too
(see page 24 for notes).
Product line 01 48
Product line 02 49
Product line 02 APE 50
Product line 02 APB 51
Product line 02 APD 52
Product line 02 RoF 53
Product line 02 FS 54
Product line 02 FSk (short design) 55
Product line 02 RS 56
Product line 02 RSk (short design) 57
Product line 02 SHR 58