Electronic Solutions SG
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ELECTRONIC SOLUTION<br />
Discovery Kit for STM32F746NG<br />
Microcontroller<br />
• AXI and multi-AHB bus matrixes for interconnecting<br />
core, peripherals and memories<br />
• Double-Precision Floating-Point maths unit on some variants<br />
• Up to 16KB +16KB of I-cache and D-cache<br />
• Up to 2MB of embedded Flash memory, with Read-<br />
While-Write capability on certain devices<br />
• Up to 512KB of data memory<br />
J-Link BASE Probe<br />
• A JTAG programming and debug probe supporting<br />
a large number of processor cores<br />
• Supported by all major IDEs such as IAR EWARM, Keil<br />
MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX,<br />
Renesas HEW, Renesas e2studio, and many others<br />
Zynq ® -7000 ZedBoard Development Kit<br />
• Zynq-7000 SoC XC7Z020-CLG484-1<br />
• Onboard MT41K128M16HA-15E:D 512MB DDR3 SDRAM memory<br />
• Onboard S25FL256S 256Mbit Quad-SPI serial flash memory<br />
• 30 x 11mm 128 x 32px OLED display panel<br />
882-0278 Device Core: ARM Cortex M7 STM32F746G-DISCO<br />
131-1319 For Use With Flash microcontrollers 8.08.00 J-LINK BASE<br />
134-6457 For Xilinx Zynq-7000 SoC 410-248<br />
Discovery Kit for STM32F429ZI<br />
Microcontroller<br />
• STM32F429ZIT6 Cortex-M4F core microcontroller<br />
with 2MB Flash memory, 256KB RAM<br />
• On-board 64MB (4M x 16-bit) SDRAM memory<br />
• Use the kit as a standalone with the on-board ST-LINK/V2-B<br />
• USB functions: Debug port, Virtual COM port, Mass storage<br />
• 2.4in 240 x 320pixel QVGA TFT LCD display panel<br />
J-Link ULTRA+ Probe<br />
• A JTAG/SWD programming and debug probe<br />
supporting a large number of processor cores<br />
• Features seamless integration into the IAR Embedded<br />
Workbench IDE and comes with integrated licenses for unlimited<br />
breakpoints in Flash memory, RDI / RDDI and J-Flash<br />
Altera USB Blaster<br />
• Links your PC to a 10-pin header connected to your FPGA<br />
• Allows you to send configuration data from your<br />
PC to the FPGA during prototyping or to program<br />
data into the system during production<br />
• Compatible with Windows and Linux machines<br />
• The 10-pin being integrated into the device<br />
makes for effortless using<br />
909-3660 Device Core: ARM Cortex M4F STM32F429I-DISC1<br />
131-1321 For Use With Flash microcontrollers 8.16.28 J-Link ULTRA+<br />
690-4093 Programming modes: JTAG, Passive<br />
Serial & Active Serial<br />
PL-USB-BLASTER-RCN<br />
Discovery Kit for STM32F407VG<br />
Microcontroller<br />
• 168MHz STM32F407VGT6 Cortex-M4F core<br />
microcontroller with1MB Flash memory, 192KB RAM<br />
• On-board LIS302DL or LIS3DSH MEMS 3-axis accelerometer<br />
• On-board MP45DT02 MEMS audio<br />
omnidirectional digital microphone<br />
• On-board CS43L22 stereo audio DAC<br />
J-Link PRO Probe<br />
• A JTAG/SWD programming and debug probe<br />
supporting a large number of processor cores<br />
• Comes with integrated licenses for unlimited breakpoints<br />
in Flash memory, RDI/RDDI, GDB Server and J-Flash<br />
• An Ethernet connection allows use of the debug probe far<br />
away from the PC, over a hard-wired or wireless network<br />
USB Flywire Cable Programmer<br />
• Used for 2-way communication with software tools like<br />
the Reveal logic analyser, and MicoSystem debugger<br />
• The programming cables connect to either USB or PC parallel<br />
ports and use flywire connectors to the target board<br />
• The functions provided by the programming cables correspond<br />
with available functions on Lattice programmable devices<br />
910-7951 Device Core: ARM Cortex M4F STM32F407G-DISC1<br />
131-1322 For Use With Flash microcontrollers 8.12.00 J-Link PRO<br />
863-3526 Operating voltage: 1.2V to 3.3V HW-USBN-2B<br />
sg.rs-online.com<br />
6
Change language