GME Supply Catalog Version 20.4

ROPE & RESCUE \\ ROPE GRABS & ASCENDERS
PETZL ASAP MOBILE FALL
ARRESTER
3/8” - 7/16” (10 - 12 mm) rope diameter. Arrests falls,
slides, and uncontrolled descents. Works on vertical or angled
rope. Locks on the rope even if grabbed during the fall. Moves
up or down the rope without any manual manipulation of the
device. Easy to install and remove at any point on the rope.
Weight capacities: 220 lbs without energy absorber, 308 lbs
with ASAP’Sorber, 551 lbs with Absorbica. ANSI Z359.15
compliant when used with Oxan Triact-Lock Carabiners, an
ASAP’Sorber or ASAP’Sorber Axess, Captiv positioning bars,
and a Ray 12 mm rope with a sewn termination.
B070AA00 w/o Carabiner - $214.95
M72A TLA Carabiner - $24.95
PETZL ASAP LOCK MOBILE FALL
ARRESTER
3/8” - 1/2” (10 - 13 mm) rope diameter. Integrated locking
function allows the user to immobilize the device to reduce the length
of a fall. Arrests falls, slides, and uncontrolled descents. Works on
vertical or angled rope. Moves up or down the rope without any
manual manipulation. Easy to install and remove at any point on the
rope. Connection arm makes the system loss-resistant when passing
intermediate anchors. Weight capacities: 308 lbs with ASAP’Sorber,
551 lbs with Absorbica. ANSI Z359.15 compliant when used with an
ASAP’Sorber or ASAP’Sorber Axess, an Oxan Triact-Lock Carabiner,
Captiv positioning bars, and a Ray 12 mm rope with a sewn termination.
B071BA00 - $289.95
PETZL RAY ROPE
12 mm rope diameter. This rope has low stretch
when put under tension. The sewn termination with
protective sheath helps keep the connector in position
and facilitates handling. ANSI Z359.15 compliant when
used with an ASAP or ASAP Lock mobile fall arrester.
R091AA00 25’ - $45.95
R091AA01 50’ - $71.95
R091AA02 75’ - $97.95
R091AA03 100’ - $123.95
R091AA04 200’ - $227.95
PETZL CAPTIV
The Captiv positioning
bar works as a makeshift
captive eye- helping load
the carabiner along its major
axis, limit flipping, and keep
an integrated connection to a
device or lanyard. Compatible
with Ok, Am’D, William, Oxan
carabiners and the Rollclip A
pulley carabiner.
M093AA00 - $21.95
PETZL ASAP’SORBER
LANYARD WITH ENERGY
ABSORBER
Connects the ASAP or ASAP Lock mobile
fall arrester to the harness. Allows the user
to distance themself from the rope in order
to declutter the work area and protect the
rope. Absorbs the energy of a fall by the
tearing of specific stitching. Available in (2)
lengths for a choice of the best balance
between distance from the rope and
reducing the fall length. 310 lbs weight
capacity. Lacks sufficient energy absorption
to safely arrest the potential energy during
a two-person rescue. ANSI Z359.13
compliant 6’ when used with Oxan Triact-
Lock Carabiners and Captiv positioning bars.
L071BA00 20 cm - $49.95
L071BA01 40 cm - $54.95
PETZL ASAP’SORBER
AXESS ENERGY
ABSORBER
Connects to the ASAP or ASAP Lock
mobile fall arrester to allow the user
to work at a distance from the rope, in
order to protect it during certain work
phases. Equipped with tear-webbing
inside a pouch that opens on each end,
the absorber is protected from abrasion
while allowing for regular inspection.
In can be used in two-person rescue
situations for a maximum load of 250
kg. ANSI Z359.13 compliant 6 feet
when used with Oxan Triact-Lock
Carabiners and Captiv positioning bars.
L071CA00 - $55.95
KONG 802 BACK-
UP MOBILE FALL
ARRESTER
3/8” - 7/16” (10 - 12) mm
rope diameter. Works on
vertical or angled rope. Moves
up or down along the rope
without manual intervention.
Easy to install and remove at
any point on the rope. For rope
access applications unit can
be used with tug cord. Nonaggressive
cam design. One
person weight capacity: 220
lbs. ANSI rated.
ANSI-8021NO400KK
Twistlock - $166.24
ANSI-8022NO402KK
Autoblock - $155.15
TUF-TUG
ALUMINUM
KERNMANTLE
ROPE GRAB
1/2” - 5/8” (13 - 16 mm)
rope diameter. Dual cams
for double safety. Patented
design pivots open for
easy attachment
anywhere
on lifeline.
Automatically
travels up
with user
on pre-tensioned lifeline.
Incorporates spring-loaded
cams to hold rope grab in
parked position.
5000-IE-AL-KM - $89.99
MIO ROPE GRAB
1/2” (13 mm) rope
diameter. Stainless steel selftrailing
rope grab. Removable
dual action pin for easy
placement. Grips automatically
in the event of a fall and
dissipates the energy of the
fall by slipping along the rope.
Comes with lanyard and ANSI
snaphook.
HD26005 1/2” rope -
$189.99
HD26006 5/8” rope -
$189.99
HD26114 7/16” rope -
$189.99
62
GMESUPPLY.COM