simatic-st70n-2020

© Siemens 2020
■ Overview
SIPLUS digital fail-safe output module:
F-DQ 8x24 V DC 2 A PPM
Important properties:
• 8-channel digital fail-safe output module for ET 200MP/
S7-1500
• Fail-safe 2-channel activation
(parameterizable PM/PP switching) of actuators
SIMATIC S7-1500 Advanced Controllers
I/O modules
SIPLUS F-digital/analog modules
SIPLUS digital F-output modules
• Actuators can be controlled up to 2 A
• Certified up to SIL 3 (IEC 61508), PL e (ISO 13849)
• LED display for error, operation, supply voltage and status
• Clear module labeling
- Plain text identification of the module type
- Complete Article No.
- 2D matrix code (article and serial number)
- Connection diagram
- Hardware and firmware version
• Optional labeling accessories
- Labeling sheets, yellow
• The module supports PROFIsafe in both PROFIBUS and
PROFINET configurations.
• Can be used with all fail-safe SIMATIC S7-1500 F-CPUs in the
central configuration, as well as ET 200MP distributed I/O with
all other SIMATIC S7 F-CPUs.
Note:
SIPLUS extreme products are based on SIMATIC standard
products. The contents listed here were taken from the
respective standard products. SIPLUS extreme-specific
information was added.
4
■ Technical specifications
Article number
6AG1526-2BF00-2AB0
Based on
6ES7526-2BF00-0AB0
SIPLUS S7-1500 F-DQ 8x24VDC/2A
Ambient conditions
Ambient temperature
during operation
• horizontal installation, min. -25 °C; = Tmin
• horizontal installation, max. 60 °C; = Tmax
Altitude during operation
relating to sea level
• Installation altitude above sea level, 2000m
max.
• Ambient air temperature-barometric
pressure-altitude
Relative humidity
• With condensation, tested in
accordance with IEC 60068-2-38,
max.
Resistance
Coolants and lubricants
- Resistant to commercially
available coolants and lubricants
Use in stationary industrial systems
- to biologically active substances
according to EN 60721-3-3
- to chemically active substances
according to EN 60721-3-3
- to mechanically active substances
according to EN 60721-3-3
Tmin ... Tmax at
1 140 hPa ... 795 hPa
(-1 000 m ... +2 000 m)
100 %; RH incl. condensation/frost
(no commissioning under
condensation conditions)
Yes; Incl. diesel and oil droplets in
the air
Yes; Class 3B2 mold, fungus and dry
rot spores (with the exception of
fauna); Class 3B3 on request
Yes; Class 3C4 (RH < 75 %) incl.
salt spray acc. to EN 60068-2-52
(severity degree 3); *
Yes; Class 3S4 incl. sand, dust, *
Article number
Based on
Use on ships/at sea
- to biologically active substances
according to EN 60721-3-6
- to chemically active substances
according to EN 60721-3-6
- to mechanically active substances
according to EN 60721-3-6
Usage in industrial process
technology
- Against chemically active
substances acc. to EN 60654-4
- Environmental conditions for
process, measuring and control
systems acc. to ANSI/ISA-71.04
Remark
- Note regarding classification of
environmental conditions acc. to
EN 60721, EN 60654-4 and
ANSI/ISA-71.04
6AG1526-2BF00-2AB0
6ES7526-2BF00-0AB0
SIPLUS S7-1500 F-DQ 8x24VDC/2A
Yes; Class 6B2 mold and fungal
spores (excluding fauna); Class 6B3
on request
Yes; Class 6C3 (RH < 75 %) incl.
salt spray acc. to EN 60068-2-52
(severity degree 3); *
Yes; Class 6S3 incl. sand, dust; *
Yes; Class 3 (excluding trichlorethylene)
Yes; Level GX group A/B (excluding
trichlorethylene; harmful gas
concentrations up to the limits of
EN 60721-3-3 class 3C4
permissible); level LC3 (salt spray)
and level LB3 (oil)
* The supplied plug covers must
remain in place over the unused
interfaces during operation!
Siemens ST 70 N · 2020
4/43