Pullers and Puller Sets - Stanley Proto Industrial Tools
Pullers and Puller Sets - Stanley Proto Industrial Tools
Pullers and Puller Sets - Stanley Proto Industrial Tools
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
338<br />
PULLERS & PULLER SETS<br />
3-WAY CROSSARM<br />
THREADED 3⁄4—12 ACME<br />
Product<br />
ID No. Description (A) (B)<br />
4227CA 3-Way Crossarm<br />
Threaded<br />
3⁄4—12 Acme<br />
5-1⁄2" 1-5⁄8"<br />
ADJUSTABLE REVERSIBLE JAW<br />
Product<br />
ID No. Description (A) (B) Reach<br />
4230RJ Adjustable<br />
Reversible Jaw<br />
3-5⁄8" 2-3⁄4"<br />
LEGS<br />
Product<br />
ID No. Description (A) Length (B) (C) Thread (D) Thread<br />
4240L Medium Leg 14-3⁄16" 12-19⁄64" 1⁄2"-20 UNF 5⁄8"-18 UNF<br />
Visit us at...<br />
www.stanleyproto.com<br />
SEPARATOR THREADED RODS<br />
Product<br />
ID No. (A) Length Thread For Separator<br />
4332R 8-1⁄2" 5⁄8-18 UNF 4332<br />
4333R 10" 3⁄4-16 UNF 4333<br />
CROSSARM<br />
Product<br />
ID No. Description (A) Length Use with Forcing Screw<br />
4001B Crossarm 6-5⁄8" 4001S<br />
FORCING SCREW<br />
Product Use with<br />
ID No. Description (A) Length (C) Hex Thread Tip No. Crossarm<br />
4001S Forcing Screw 7-1⁄8" 1-1⁄8" 1-8 4001ST 4001B<br />
NOTE: ALL PROTO-EASE forcing screws are coated at the factory with the latest aero<br />
space dry film lubricant to increase screw life, reduce wear <strong>and</strong> torque required for<br />
screw turning. It is recommended that a few drops of medium grade oil (SAE 30 or equiva<br />
lent) be added to screw threads prior to every use. Screw threads must be kept clean at<br />
all times.<br />
MADE IN<br />
USA