Marine Standard Sections catalogue
CompoTech produce mast tubes and other spars that will enable designers, yards and riggers to specify what they require. A range of standard sections are available from which to base a design.
CompoTech produce mast tubes and other spars that will
enable designers, yards and riggers to specify what they
require. A range of standard sections are available from
which to base a design.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Catalogue of Standard Products
Marine Sections
Page 3
IMS A2
Dimension
mm
221 x 101
Available Lengths
6m to 8m
Joining Sleeve
Wall Thickness 4.0 mm
EIxx
EIyy
Nmm 2 2.66 E+11
Nmm 2 9.34 E+11
Weight
kg/m
3.20
IMS A4
Dimension
mm
222 x 102
Available Lengths
6m to 8m
Joining Sleeve
Wall Thickness 4.5 mm
EIxx
EIyy
Nmm 2 3.05 E+11
Nmm 2 1.06 E+12
Weight
kg/m
3.60
IMS C
Dimension
mm
332 x 134
Available Lengths
6m to 8m parallel
3m Tapered
Joining Sleeve
XX Wall 4.8 mm
YY Wall 3.5 mm
EIxx
EIyy
Nmm 2 4.57 E+10
Nmm 2 2 E+7
Weight
kg/m
3.80
Disclaimer
All advice, information, instruction or recommendation (advice) is given in good faith but CompoTech only warrants that advice in
writing is given with reasonable skill and care. No further duty or responsibility is accepted by CompoTech. All advice is given subject
to the CompoTech terms and conditions of sale which are available on request from CompoTech or may be viewed at the website:
http://www.compotech.com/
CompoTech strongly recommends that customers conduct appropriate testing of any goods or materials supplied by CompoTech to
ensure that they are suitable for the planned application. Such testing should include testing under conditions as close as possible to
those to which the final component may be subjected. CompoTech specifically excludes any warranty of fitness for purpose of the
goods other than as set out in writing by CompoTech. CompoTech reserves the right to change the unwritten detail of specifications
Compo Tech PLUS, spol. s r. o.
Nová 1316, 342 01 Sušice
Czech Republic
www.CompoTech.com
Enquire@CompoTech.com
Tel: +420 376 526 839