Honda 22YM Adventure Accessories Brochure

Después de instalar los adhesivos, aplicar un poco de calor con un secador si la temperatura ambiente está por debajo de los 21 Cº. El adhesivo alcanza su máxima adherencia en 48 horas. Si es posible,
déjelo al sol para obtener un mejor resultado.
After installation, heat the surface gently with a hair dryer if the ambient air temperature is below 21 degrees. The adhesive reaches full strength in 48h. If possible, let it stand in the sun for better results.
Après l'installation, chauffez délicatement la surface avec un sèche-cheveux si la température de l'air ambiant est inférieure à 21 degrés. L'adhésif atteint sa pleine force en 48h. Si possible,
laissez-le reposer au soleil pour de meilleurs résultats.
Le kit adhésifs comprend les pièces spécifiées ci-dessous.
Nº NAME QTY
1 RR COWL , RR STICKER C PROTECTOR 1
2 RR COWL , RR STICKER R PROTECTOR 1
3 RR COWL , RR STICKER L PROTECTOR 1
4 RR COWL , MIDDLE STICKER R PROTECTOR 1
5 RR COWL , MIDDLE STICKER L PROTECTOR 1
6 RR COWL, FR UP STICKER R PROTECTOR 1
7 RR COWL, FR UP STICKER L PROTECTOR 1
8 RR COWL, FR DOWN STICKER R PROTECTOR 1
9 RR COWL, FR DOWN STICKER L PROTECTOR 1
10 SWINGARM R, STICKER PROTECTOR 1
L-SIDE CENTER R-SIDE
Nº NAME QTY
11 SWINGARM L, STIKCER PROTECTOR 1
12 PIVOT FRAME R, STICKER PROTECTOR 1
13 PIVOT FRAME L, STICKER PROTECTOR 1
14 F/T, STICKER R PROTECTOR
1
15 F/T, STICKER L PROTECTOR
1
16 F/T, STICKER C PROTECTOR
1
17 FRAME BODY, FR STICKER PROTECTOR 1
18 COWL SIDE R, STICKER PROTECTOR UP 1
19 COWL SIDE L, STICKER PROTECTOR UP 1
20 COWL SIDE R, STICKER PROTECTOR DOWN 1
Nº NAME QTY
21 COWL SIDE L, STICKER PROTECTOR DOWN 1
22 FR FORK STICKER PROTECTOR
2
23 FR FENDER, STICKER C PROTECTOR
1
24 FR FENDER, DOWN STICKER R PROTECTOR 1
25 FR FENDER, DOWN STICKER L PROTECTOR 1
26 FR FENDER, MIDDLE STICKER R PROTECTOR 1
27 FR FENDER, MIDDLE STICKER L PROTECTOR 1
28 FR FENDER, UP STICKER R PROTECTOR 1
29 FR FENDER, UP STICKER L PROTECTOR 1
€59.00 €125.00 €89.00
€330.00 €360.00 €199.00
INNER BAG FOR 35-L TOP BOX
08L75-MJP-G51
Black nylon bag with embroidered silver Honda wing
logo on the top and red zippers. Comes with adjustable
shoulder belt and carrying handle.
4.5-LITER TANK BAG
08L85-MKS-E00
With 4.5 liters of capacity, this waterproof Tank Bag
is convenient to store the most essential items. Its
look-through pocket on the top allows to store a map.
Combining a one-touch buckle and magnet, this tank
bag is easy to attach or remove.
Maximum load weight: 1.5 kg
3-LITER TANK BAG
08L89-MKS-E00
This 3 Liters Tank Bag features a transparent pocket and
it's ideal to store small personal items. Unnoticeable
while steering the bike, this Tank Bag is firmly attached
thanks to a one-touch buckle and a magnet. A rain cover
is included.
Maximum load weight: 1.5 kg
FRONT SIDE PIPE WITH ATTACHMENT
08ESY-MKS-L1FR
Providing a strong Adventure look, the Front Side Pipe
improves the protection of the body parts of the bike.
Made of stainless steel and finished with electrolytic
polishing, it is resistant to corrosion and easy to clean.
It can be used to mount the Front LED Fog Lights (sold
separately).
ENGINE GUARD WITH ATTACHMENT
08ESY-MKS-ENG
The Engine Guard improves the protection of the engine
and the lower part of the bike. Made of stainless steel
and finished with electrolytic polishing, it is resistant
to corrosion and easy to clean. (Attachment included)
RADIATOR GRILLS
08F71-MKS-E00
Made of stainless steel and displaying a CRF logo, the
Radiator Grills increase the African Twin tough image.
Their original mesh pattern combines cooling capability
with a protection against stone chippings for the
radiators.
LUGGAGE
PROTECTION
IMPORTANT
UTILIZACIÓN
La colocación del adhesivo es sencilla y antes de empezar, debe tener las superfícies bien limpias. Para ello, puede utilizar alcohol. Debe retirar una punta
del soporte del adhesivo y presentarlo en la moto. Una vez posicionado correctamente, puede retirar el papel soporte, despacio y aplicando suavemente
con la mano para eliminar el aire.
USE:
The placing/laying of the sticker is simple and before starting surfaces must be clean. For this use alcohol. Remove the end of the base of the sticker
and display it on the surface. Once the sticker is correctly located you can remove slowly and gently the paper base, applying it with the hand to remove
air.
48h
48h
UTILISATION
Le collage de l’adhésif est simple, mais avant de commencer, assurez-vous que la surface soit bien propre. Pour cela vous pouvez utiliser de
l’alcool. Retirez une pointe du support de l’adhésif et présentez-le sur la moto. Une fois positionné correctement, vous pouvez retirer le papier du
support, lentement et en l’appliquant délicatement avec la main pour éviter les bulles d’air.
El Kit Adhesivos consta de las piezas en este manual expresadas.
Stickers kit includes parts specified above.
29
27
25
24
26
28
23
22
17
19
21
22
18
20
15
16
14
13
12
7
6
9
8
11
10
€55.00 €55.00
€59.00 €30.00 €90.00
5
3
1
4
2
58L TOP BOX STICKERS
08ZAR-LOD-001GTOP
Improve the design of your Top Box by adding this exclusive stickers kit for Africa Twin.
Possibility to order the 58L top box with stickers already fitted, as shown in picture (Part
number: 08MHF-LOD-001GTOP)
PLASTIC PANNIERS STICKERS
08ZAR-LOD-002GPAN
Improve the design of your panniers by adding this exclusive stickers kit for Africa Twin.
Possibility to order the panniers with stickers already fitted, as shown in picture (Part
number: 08MHF-LOD-002GPAN)
SIDE TANK PADS
08R81-MKS-E00
These reinforced side pads are specifically designed
to fit the tank shape. They protect the paint against
scratches and give a better control for the rider in a
stand-up position.
KNUCKLE GUARDS EXTENSION
08P72-MKS-E00ZC OR E00ZD
These Knuckle Guard Extensions improve the comfort
and the protection of the hands.
Applications recommended:
• Tricolor or Black model: E00ZC
• Red model: E00ZD
PROTECTIVE STICKERS SET
08ZAR-LOD-003CFSP
Improve the protection of the body and the engine
parts with this set of die-cut stickers.
20 21