Water softeners catalog

More documents

Recommendations

Info

15000123-02 CS15H water softener (Reg. Metered-Time) 25 lt. resin15000123-03 CS15H water softener (Reg. Metered-Time) 30 lt. resinThe CS water softeners range make of simplicity their point of strength. They have a volumetric valve andcan be setted with four kind of regeneration: mixed time/volume regeneration, Time delayed, meterimmediate, meter delayed. Time Delayed - Is a delayed regenerations according to selected frequence,Meter immediate - Regenerations are started after treating the programmed volume of water, Meterdelayed regenerations - Regenerations are started after treating the programmed volume of water at theprogrammed hour, Mixed time/volume regeneration - Similar to delayed regeneration, but it allows toprogram a maximum period of time without regenerations. After this time the system will start a delayedregeneration. The necessary operations for garantuee the correct functioning of the softener are to keepingpower on all the time and remaining enough salt in brine tank. The only requirements for installation arethree water pipe ports (inlet, outlet, drain) and power supply. Bypass and mixing valve to adjust the outlethardness included in the system. CE, NSF, D.M. 25, D.M. 174 Certified.Features* Pressure min.: 1,4 bar(1,4 kg/cm2)* Pressure Max.: 8,6 bar(8,6 kg/cm2)* Temperature Min: 4°C* Temperature Max: 43°CWater hardness (limestone)In °F (French degrees), can be measured with the drops of Titrant, important to determine the choice of thetype of water softener and optimize the consumption of salt.Calculate sample to determine the correct articleA water softner of 25 liters resin with a hardness of 40°F (medium-high hardness), develops 3.500liters ofsoftened water (140:40=3.500). In this case, must planning 3.5m3 in treatment capacity of the softenerthrough the buttons on the display and provides free water softener without scale at zero French degrees.Adjustment of outlet hardnessIt's recommended to not leak totally softened water in a residential installation. CS Water softeners have aresidual hardness integrated regulator that allows you to precisely adjust the hardness of the treated water.To adjust the residual hardness must then carefully open the regulator MIX valve. All softeners are suppliedwith the valve fully closed and then will deliver water at 0°F. Water intended for human consumption, werecommend a residual hardness between 5 and 10ºF for copper pipes and between 8 and 10 º F for ironpipes. Depending on the hardness out planned, the water softener will tend to produce more water and lesssweetened salt intake because the input hardness must be compensated with the output value. A watersoftener of 25 liter resin with a hardness of incoming 40°F and 5°F and out of hardness, develops 4.000lit.of softened water (140:35=4.000). In this case must planning 4.0 m3 in treatment capacity of the softenerthrough the buttons on the display. The average every person consumes 150 liters of water a day isrecommended and a regeneration time scheduled every 4/5 days, then a family of 4 with water at 40°Fconsumes for 5 days 3.000 liters, a 25 liters of water softner so with a planned regeneration even at 6 dayscan be installed.Benefits and advantagesReduction of water hardness, which is cause of scale. ENERGY SAVING: the device prevents theformation of deposits in pipes and hydraulic lines. Greater sense of wellness during the shower. Skin softand clean. Increased duration of appliances and boilers. COST SAVING: reduction in the use of soaps,fabric softeners and chemicals. Reduced maintenance costs. Fully automatic operation. It should just worryabout adding salt in the water softner.Increased sodium (for drinking water)Most of the sodium consumed is taken with food, especially those produced by industrial processing. Salt isan excellent preservative and is used as an additive for processed products. The intake of sodium with thewater we drink is relatively low compared to that which is taken with food. All softeners to produce softwater using ion exchange resins in the produce softened water output of sodium ions. The recommendedsodium limit for water intended for human consumption is 200 liters ppm. Depending on the concentrationof sodium and water hardness, the water can have a concentration of sodium than the recommended.Where this occurs, or if you need to follow a diet low in salt, it is advisable to install a reverse osmosis16 September 2022 12/123
drinking water for the home.Specifications Model 15000123-01 10 lt. resin (ideal for 1/2 people)* Exchange capacity: 56ºHFxm3* Regeneration salt consumption: 1,8 kg/salt.* Water consumption for regeneration:102 lt.* Number treated water for regeneration, 35°F-1,600m3, 40°F-1,400m3, 45°F-1,244m3, 50°F-1,120m3,60°F-0,933m3.* Working flow: 0,3 m3/h* Working flow MAX: 0,5 m3/h* Inlet/Outlet water: 3/4"* Dimensions mm (WxDxH): 346x476x575Specifications Model 15000123-02 25 lt. resin (ideal for 6/7/8 people)* Exchange capacity: 140ºHFxm3* Regeneration salt consumption: 4,1 kg/salt.* Water consumption for regeneration:225 lt.* Number treated water for regeneration, 35°F-4,000m3, 40°F-3,500m3, 45°F-3,111m3, 50°F-2,800m3,60°F-2,333m3.* Working flow: 0,8 m3/h* Working flow MAX: 1,2 m3/h* Inlet/Outlet water: 1"* Dimensions mm (WxDxH): 346x476x1085Specifications Model 15000123-03 30 lt. resin (ideal for 8/9/10 people)* Exchange capacity: 159ºHFxm3* Regeneration salt consumption: 2,88 kg/salt.* Water consumption for regeneration:140 lt.* Number treated water for regeneration, 35°F-4,542m3, 40°F-3,975m3, 45°F-3,533m3, 50°F-3,180m3,60°F-2,650m3.* Working flow: 2 m3/h* Working flow MAX: 3 m3/h* Inlet/Outlet water: 1"* Dimensions mm (WxDxH): 346x476x1313Code: 15000124CS13 - UP Flow water softener (Reg. Metered-Time) 12,5 - 25 lt.resinVariantsCodeDescription15000124-01 CS13 - UP Flow water softener (Reg. Metered-Time) 12,5 lt. resin15000124-02 CS13 - UP Flow water softener (Reg. Metered-Time) 25 lt. resinThe CS water softeners range make of simplicity their point of strength. They have a volumetric valve andcan be setted with four kind of regeneration: mixed time/volume regeneration, Time delayed, meterimmediate, meter delayed. Time Delayed - Is a delayed regenerations according to selected frequence,Meter immediate - Regenerations are started after treating the programmed volume of water, Meterdelayed regenerations - Regenerations are started after treating the programmed volume of water at the16 September 2022 13/123
Page 1 and 2: Watersofteners
Page 3 and 4: Residential cabinet water softeners
Page 5 and 6: water using ion exchange resins in
Page 7 and 8: of softened water (140:35=4.000). I
Page 9 and 10: recommended and a regeneration time
Page 11: consumes for 5 days 3.000 liters, a
Page 15 and 16: 60°F-1,166m3.* Working flow: 0,4 m
Page 17 and 18: Code: 15000118Ergo water softener (
Page 19 and 20: * Maximum hardness: 97°HF* Water c
Page 21 and 22: * Exchange capacity: 55ºHFxm3.* Sa
Page 23 and 24: Specifications* Min. pressure: 1.4
Page 25 and 26: that the system is put in bypass.Fe
Page 27 and 28: VariantsCodeDescription15000113-08
Page 29 and 30: Model Specifications 15000113-25 25
Page 31 and 32: * Max. flow 0,54m3/h* Dimensions Lu
Page 33 and 34: * Min. pressure: 1.4 bar (1.4 kg/cm
Page 35 and 36: * Max. pressure: 8bar(8kg/cm2)* Min
Page 37 and 38: recommended sodium limit for water
Page 39 and 40: - Meter override.The water hardness
Page 41 and 42: Automatic water softener. Electroni
Page 43 and 44: * Quantity of treated water for reg
Page 45 and 46: Brine tank ØxH (mm.) - 40lit.: 460
Page 47 and 48: * Exchange capacity: 62,4ºHFxm3.*
Page 49 and 50: Model Specifications 15000204-1D 20
Page 51 and 52: Features* Min. pressure : 1.38 bar
Page 53 and 54: Code: 15000208Single tank water sof
Page 55 and 56: Brine tank ØxH (mm.) - 25lit.: 400
Page 57 and 58: * Salt consumption for regeneration
Page 59 and 60: Pressure vessel - 50lit.:10"x54"Bri
Page 61 and 62: - Quantity of water treated for reg
Page 63 and 64:
Code: 15000421Overflow Elbow 90° /
Page 65 and 66:
Code: 15000435Complete chlorine mak
Page 67 and 68:
Code: 15000416STERIL-SOFT - compone
Page 69 and 70:
Code: 15000431Upper bayonet screen
Page 71 and 72:
VariantsCodeDescription15000409-05
Page 73 and 74:
Code: 15000413Safety brine valve wi
Page 75 and 76:
Page 77 and 78:
Code: 15000442PVC flange stem adapt
Page 79 and 80:
• Distributor Tube Diameter: 1.05
Page 81 and 82:
5600SXT, 5800SXT Fleck residential
Page 83 and 84:
performance and reliability year af
Page 85 and 86:
* Fully programmable regeneration c
Page 87 and 88:
Backwash @ 25 psi/1.7 bar drop (inc
Page 89 and 90:
Flow RateSService @ 15 psi/1 bar dr
Page 91 and 92:
Code: 15010303Clack WS1CI, WS1TC, W
Page 93 and 94:
Code: 15010405BNT850F water softene
Page 95 and 96:
Runxin residential valvesCode: 1501
Page 97 and 98:
Page 99 and 100:
Code: 15010504F73 Runxin water soft
Page 101 and 102:
- Flow rate: 4,0 m3/h.- Regeneratio
Page 103 and 104:
Height carter excluded (mm): 900Sui
Page 105 and 106:
Code: 15015010Platinum II open wate
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
* Capacity of salt is indicated for
Page 113 and 114:
Page 115 and 116:
To buy with every brine tank:1x 150
Page 117 and 118:
15015609-090 Fuller pressure vessel
Page 119 and 120:
15015606-040 Greentank pressure ves
Page 121 and 122:
in the cylinder)Code: 15015602Press
Page 123:
Powered by TCPDF (www.tcpdf.org)
show all

Water softeners catalog

Create successful ePaper yourself

Delete template?

Save as template?