TRADE OF VEHICLE BODY REPAIR - eCollege

Module 6– Unit 3
Always use PPE and full face mask when using these products and
products like them. Make sure no contact is made with your skin.
Cleaning and Valeting Process
Prior to commencing work, check that the vehicle is ready. All
body repairs, paintwork and mechanical work should have been
completed. Be aware of areas which have been newly painted as
they may be chemically or water sensitive. Individual chemical
products carry their own instructions, and health and safety
procedures must be adhered to at all times.
Autoglym recommend the following step by step procedure for
cleaning and valeting.
Cleaning: Wet Bay
• Remove spare wheel, rubber mats and wheel trims if fitted.
• Protect engine air intake and sensitive electrical equipment
(distributor cap, fuse box) with plastic sheet.
• Apply degreaser to engine and compartment. Brush heavy
soiling. Alternatively use hot pressure washer with
appropriate detergent.
• Apply degreaser to door apertures and edges. Brush heavy
soiling. Alternatively use hot pressure washer with
appropriate detergent.
Vehicle Body Repairs - Phase 2 18