26.12.2012 Views

stretch ceilings - Barrisol

stretch ceilings - Barrisol

stretch ceilings - Barrisol

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Copyright, reproduction not permitted, 1990/2008, Normalu S.A. 68680 Kembs<br />

STRETCH CEILINGS<br />

TYPE(S) OF CEILING<br />

SPECIFICATION GUIDE<br />

BARRISOL TREMPO UK K40<br />

K40 SUSPENDED CEILINGS<br />

BARRISOL TREMPO<br />

To be read with Preliminaries/ General conditions<br />

116 STRETCH CEILINGS TREMPO<br />

Location: - Site as specified<br />

Setting Out: - As indicated on drawings<br />

Structural Soffit(s): - As indicated on drawings<br />

Type: - BARRISOL membrane sheet with supporting trims<br />

Manufacturer: - BARRISOL NORMALU SAS, Kembs, France<br />

Installer: - BARRISOL NORMALU SAS - 68680 KEMBS - FRANCE<br />

Tél. : +33 (0)3 89 83 20 20 - Fax : +33 (0)3 89 48 43 44<br />

E-mail : mail@barrisol.com- www.barrisol.com<br />

Colour: - Specify from <strong>Barrisol</strong> colour card incl. Ref. no.<br />

Finish: - Matt/Satin/Lacquer/Metallic/Translucent/Perforated/Suede<br />

GENERAL<br />

DOCUMENTATION<br />

Chapter 12<br />

Page 6<br />

Sheet: - Material to be confirmed as complying with BS476 parts<br />

6&7 class “O”, plus Part 12, BS2782 and Euro classification<br />

EN13501-1.<br />

- Will be joined by lacing to the <strong>Barrisol</strong> Trempo track attached<br />

to the periphery of the walls, or partition walls in the case of<br />

large surfaces. A class “0” steel safety small chain will be<br />

attached every 3 metres.<br />

- Large panels will be divided in width approximately every<br />

6 metres to retain their even surface and joined with a special<br />

double track aluminium rail or invisible joint finish or with a<br />

lighting strip with built-in interlocking rails.<br />

Track (choice) : - Aluminium Track with perforation to allow the hook to be<br />

installed.<br />

Profile: - As indicated on drawings. Shapes and forms to be within<br />

manufacturers guidelines<br />

Support system: - Typical suspension for double rail using galvanized MF<br />

system or similar<br />

Service Fittings: - As indicated on drawings<br />

Accessories: - As indicated on drawings<br />

Vapour Barrier: - Sheet to comply with BS3177 vapour test<br />

69

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!