LGD

Recommendations

Info

4. Flapper Valve:FlapFlapper assembly5. Lower Slide valve:6. Flush button:7. Water Pressurizer:8
6) General Operations of CDTS1)Stand-by condition2)Flush Cycle3)Retention Tank Discharge Cycle1)Stand-by condition Water Pressurizer – Off Water check Valve – Closed Upper Flapper Valve – Closed Lower Slide Valve – Closed2)Flush CycleStep – 1 Water Pressurizer – On (for a predetermined time) Water check Valve – On (for a predetermined time) Upper Slide Valve – Open (for a predetermined time)Step - 2 Water Pressurizer – Off Water check Valve – Off Upper Slide Valve – Closed3)Retention Tank Discharge CycleCondition – ICondition – II If train speed is - below 30 kmph then the retention tanklower slide valve – closed. If the train speed is above 30 kmph and Flush Count isbelow Predetermined value, then the Retention Tank LowerSlide Valve remain closed If the train is above 30km/h and Flush Count is equal orabove Predetermined value, the Retention Tank Lower SlideValve Opens (for a predetermined time).End of Retention Tank Discharge CycleFlush Count restarts at ZERO (0)9
Page 1 and 2: ASTUDY ON CONTROLDISCHARGE TOILET S
Page 3 and 4: INDEXPage NoABSTRACT 41) Introducti
Page 5 and 6: 1) INTRODUCTIONThe basic purpose of
Page 7: 5) Major Components of CDTS1. India
Page 11: 8) Modification suggested Presently

LGD

Create successful ePaper yourself

Delete template?

Save as template?