more@TURCK 1_23 EN

more@TURCK 1 | 2023 08 | 09
Batch functions for rapid commissioning in
industrial Ethernet networks
The Network Scan function finds all available Turck
Ethernet devices in the network and displays the
relevant device information directly. Network View also
enables the issuing of IP addresses and passwords as
well as the execution of firmware updates for all devices
in the network. The device specific web pages of all
Ethernet devices can be accessed directly from TAS.
Many of the Network View functions can also be
performed as batch functions. This allows many devices
to be updated and processed at the same time, thus
saving a lot of time when commissioning and maintaining
large networks – and all this without a PLC
or a third-party software. The ability to export device
networks in CSV format also simplifies documentation,
collaboration and management.
As a software suite, TAS integrates different functions
that can be selectively activated in the platform
in the form of apps. These are executed at device level
and are simple plug-and-play functions that start
without any additional installation required. TAS
currently features a range of apps for IO-Link sensors,
such as for radar and vibration sensors, inductive
couplers as well as RFID apps for HF and UHF
applications.
QUICK READ
Turck’s TAS IIoT platform guarantees an easy-to-use and uniform
overall solution for commissioning and managing Turck devices in
Industrial Ethernet networks, from the sensor to the controller. Turck’s
ARGEE logic software and BEEP IP address management solution are
also integrated into the new multifunction tool, as well as devicespecific
apps for applications with IO-Link and RFID. TAS is regularly
updated and extensive IIoT functions will be added for services such
as condition monitoring or edge control on PCs or local servers.