WESA Catalogue 2024 EN

PNEUMATIC ACTUATORS SERIES DA
PNEUMATIC ACTUATOR DOUBLE ACTING
TECHNICAL DATA DA [Make OMAL S.p.A.]
Design characteristic: Scotch yoke with rolling friction Pilot pressure: Designed for 5,6 bars
Piston guidance: Self-centering inside of the housing Control medium: Filtered and lubricated air [Pneurop/ISO class 4]
Body: Extruded aluminum alloy Actuator connection: Acc. to DIN EN 5211
End caps: Die cast aluminum black coated Control valve: Acc. to Namur or VDI/VDE 3845
Pinion [Drive shaft]: Stainless steel Signalling devices: Acc. to Namur or VDI/VDE 3845
Piston: Die cast aluminum alloy Approval: ATEX acc. to 2014/34/EU
Piston | Pinion seals: NBR | FKM
Rotation | Stroke: 90° | ±5° from 90° position adjustable
Temperature range: -20°C up to +80°C
Torque max.:
See the table below
DA01 - DA17
All measurements in millimeters.
ITEM ITEM OMAL TORQUE A A1 B L E M SW Ø d Ø D ISO 5211
DA01 DAN 08 8,0 Nm 43 15 43 70 8 9 8 M5 - F03
DA02 DAN 15 15,0 Nm 52 20 52 159 10 11 8 M5 - F03
DA03 DAN 30 30,0 Nm 59 20 59 174 10 11 9 M5 M6 F03 | F05
DA04 DAN 45 45,0 Nm 65 20 65 189 13 11 10 M5 F04
DA05 DAN 45 45,0 Nm 65 20 65 189 13 11 10 M5 M6 F03 | F05
DA06 DAN 60 60,0 Nm 70 20 70 198 13 14 10 M6 M8 F04
DA07 DAN 60 60,0 Nm 70 20 70 198 13 14 10 M6 M8 F05 | F07
DA08 DAN 106 90,0 Nm 83 20 83 237 13 17 12 M6 M8 F05 | F07
DA09 DAN 120 120,0 Nm 87 20 87 257 13 17 12 M6 M8 F05 | F07
DA10 DAN 180 180,0 Nm 108 30 108 290 16 22 15 M8 M10 F07 | F10
DA11 DAN 240 240,0 Nm 111 30 111 313 17 22 15 M8 M10 F07 | F10
DA12 DAN 360 360,0 Nm 118 30 118 339 19 22 19 M8 M10 F07 | F10
DA13 DAN 480 480,0 Nm 135 30 135 388 19 27 19 M10 M12 F10 | F12
DA14 DAN 720 720,0 Nm 148 30 148 433 20 27 22 M10 M12 F10 | F12
DA15 DAN 960 960,0 Nm 168 30 168 479 20 36 24 M10 M12 F10 | F12
DA16 DAN 1440 1.440,0 Nm 186 30 186 567 20 36 27 M16 - F14
DA17 DAN 1920 1.920,0 Nm 208 30 208 601 20 46 32 M16 - F14
158 PNEUMATIC ACTUATORS AND ACCESSORIES
O TABLE OF CONTENT