Draw-Like-A-Real-Architect-Preview

From the centre where these two diagonals meet you need to draw parallels to the edges of the square.
Then here comes the interesting part - you need to connect the corner of one square to the middles of the opposing
edges. After these two lines intersect the horizontal diagonal, you will get two points.
From these two points, you will draw the small arches which go on the sides of the square, then draw the two large
arches with lines from the top and bottom corners of the square.
Now you got a horizontal circle in isometric axonometric, next up we will draw a vertical ellipse.
The steps are exactly the same - the only thing you need to realise is that the square is going to have vertical edges
and 30-degree lines and that is it.
Draw Like A Real Architect
25