CAT 345CL - FULL VERSION SPECALOG

Tool Control System. The optional tool
control system maximizes work tool
productivity by configuring hydraulic
flow, pressure, and operator controls
to match a specific work tool.
System versatility enables a wide
range of tools to be used.
Work Tools. Choose from a variety of
work tools such as hammers, shears,
pulverizers, compactors, multi-processors,
sorting grapples and couplers. Ask your
Cat dealer for information on attachments
or special configurations.
Multi-Processor
Control Levers. The operator’s control
lever preferences are diverse in much
the same way as different tools.
Three types of tool controls are available
to ensure that the operator’s preferences
are met.
• Foot pedal – The hydraulic modulated
foot pedal is used in conjunction
with the hydraulic controller.
• Foot Switch – The electric on/off
switch pedal is used in conjunction
with either the hydraulic controller
or attachment controller. The foot
switch is located on cab floor.
• Tool controller joystick – Two types
of the tool controller joysticks
are available. The joystick with
modulation switch has two on/off
switches, one trigger switch and
one modulation switch. The joystick
without the modulation switch
has three on/off switches and
one trigger switch.
Hammer
13