Kitchen worktops by Getalit - Kitchen Fit Sandiacre

60
(HPL) (surface bonded with PVAc glue),
single postformed – radius 10 mm. Rear
edge protected (0.3 mm white edge bon-
ded with EVA glue). Decor of reverse side
to our option.
DIRECTLY COATED WINDOW SILLS
� Novaform
22 mm chipboard substrate type P2 to
DIN EN 312, faced with 0.3 mm decora-
tive laminate (surface glued with PVAc
ad hesive), single postformed – radius
10 mm, rear edge protected (0.3 mm
white edge, glued with EVA adhesive),
reverse side impregnated kraft paper.
� Inform
22 mm moisture resistant chipboard
substrate P5 to DIN EN 312, face side
and front edge with 0.3 mm decora-
tive laminate (surface glued with PVAc
ad hesive), front edge postformed –
radius 4 mm , rear edge protected
(0.3 mm white edge with EVA adhesive).
Reverse side resined kraft paper.
GetaLit (HPL) 0.7 mm (surface bonded
with PVAc glue). Front edge postformed
to the reverse side of the dropfront –
radius 9 mm. Rear edge protected
(0.3 mm white edge bonded with EVA
glue). Decor of reverse side of window sill
to our option.
� Classico
18 mm chipboard substrate type P2 to
DIN EN 312 with 18 mm dropfront, face
side and front edge with 0.3 mm deco-
rative laminate (surface PVAc adhesive),
front edge postformed and laminate
returned on the reverse side – radius
10 mm. Rear edge protected (0.3 mm
white edge glued with EVA adhesive).
Reverse side decor to our option. The
inside edge of the dropfront is protected
with a paper balancer.
glue), front edge postformed to the
re verse side of the dropfront – radius
11 mm. Rear edge protected (white edge
0.3 mm with EVA-glue). Decor of reverse
side to our option. The inside edge of the
dropfront is protected with a balancer.
� Instyle
18 mm moisture resistant chipboard
substrate P5 (hydrofuge) according to
DIN EN 312, dropfront 18 mm MDF-H,
face side and front edge faced with
0.3 mm decorative laminate (surface
bonded with PVAc glue), front edge
postformed to the reverse side of the
dropfront – radius 4 mm, rear edge
protected (0.3 mm white edge with
EVA glue), reverse side and inside edge
of dropfront kraft paper 0.3 mm.
��������������������������������������������������� ����������������