cooper lighting - lumark

DIMENSIONS DESCRIPTION
23 7/8" [606mm]
ORDERING INFORMATION
SAMPLE NUMBER: HPQD-GO/GAS/A-70-240V
Lamp Type
HP=High
Pressure
Sodium
MH=Metal Halide 1
Series
QD=Quadra-Lume
w/ Drop Lens
MP=Pulse Start
1, 2
Metal Halide (CWA)
14 1/2"
[368mm]
Door Frame
GO/GAS/=Flat
Aluminum
Options 6
OR=Open Rated Socket
QB=Quiet Ballast 7
Q=Quartz Restrike DC Bayonet Base
(Quartz lamp will not come on at initial cold start)
EM=Quartz Restrike with ''Delay Relay''
(Quartz lamp strikes at both hot and cold starts) 8
EM/SC=Emergency Separate Circuit
SCF=3' Aircraft Safety Cable–Housing to ceiling
BDF=Black Door Frame
G2=Double Gasketing Doors (Door to Lens, Lens to Door)
VL=Vertical Lamp 9
LL=Lamp Included 10
F1=Single Fuse (120, 277 or 347V)
F2=Double Fused (208, 240 or 480V)
HL=LumaWatt Fixture Control Module (Allows low voltage control
wire to be daisy-chained between fixtures outside AC conduit
run similar to low voltage intercom’s, fire alarms and phone
11, 12
systems)
HC=LumaWatt Fixture Control Module
(Low voltage leads pulled out of top
connection box for areas requiring all wiring to be installed in
11, 12
conduit)
DL=U.L. Labeled for Damp Locations
Lens Type
A=Acrylic Lens
A/GL=Acrylic Lens with
Glass Overlay
P=Polycarbonate Lens
P/GL=Polycarbonate
Lens with Glass
Overlay
COOPER LIGHTING - LUMARK ®
The Lumark Quadra-Lume is
perfect for applications which call
for reliable, affordable illumination
with minimal maintenance.
Quadra-Lume is designed for easy
installation on main T-bars or can
be hung by wires in lay-in ceilings
with 2' x 2' tiles. U.L. listed and
CSA certified.
The Quadra-Lume provides
minimum surface brightness,
excellent uniformity and gentle
diffusion. It is ideal for use in
department stores, banks, auto
showrooms, schools, libraries,
office buildings and auditoriums.
Lamp Wattage 3
70=70W
100=100W
150=150W
175=175W
200=200W 4
250=250W
320=320W 4
350=350W 4
400=400W
Voltage 5
120V
208V
240V
277V
347V
Accessories 13
FTA=Flush Drywall Frame Kit, Natural Anodized Aluminum
FTB=Flush Drywall Frame Kit, Black
FTW=Flush Drywall Frame Kit, White
Options &
Accessories
(See Below)
NOTES: 1 Fixtures with Metal Halide lamps MUST have glass overlay (GL) or use a open rated socket (OR). 2 200, 250, 320, 350, & 400W only. 3 All lamps are
mogul-base. 150W-MH and lower are available medium-base. 4 Pulse Start Metal Halide only. 5 Products also available in non-US voltages and 50Hz for
international markets. Consult factory for availability and ordering information. 6 Add as suffix in the order shown. 7 120/277V Metal Halide only. 8 Not
compatible with HC or HL. 9 Adds 3 1/4" to overall fixture height. 10 Lamp is shipped separate from luminaire. Lamp is Cooper designated product based on
luminaire requirements. Specified lamps must be ordered as a separate line item. 11 Requires VL (vertical lamp option). 12 Not compatible with EM or EM/SC.
13 Order separately. 14 Specifications and dimensions subject to change without notice.
QD
QUADRA-LUME
7 0 - 4 0 0 W
High Pressure Sodium
Pulse Start Metal Halide
Metal Halide
RECESSED COMMERCIAL
WITH DROP LENS
• Die-formed heavy-duty
housing is made of coldrolled
steel and finished
in highly reflective white
polyester powder coat.
Stamped steel ballast
mounting bracket is
integral part of housing
• Die-formed steel reflector
has removable panels for
easy ballast access from
below
• Die-formed heavy-gauge
steel frame can be hinged
and latched from either
side. Stamped steel
retaining clips assure
flush fit of lens with
frame
• Virgin acrylic prismatic
drop lens with UV
inhibitor
• Approximate net weight:
43 lbs. (20 kgs.)
COOPER LIGHTING
COMMERCIAL
549