Product Catalog - Pavetech

SANDPULL
• Two-sided head, 30” (76 cm) wide
• More efficient then a shovel
• Extra long handle
• Perfect width & weight to float on top of screeded sand
• Greatly reduces the amount of time spent on
your knees with a trowel
• Handle Length: 72” (183 cm)
The SANDPULL helps make the sand screeding process faster and
easier. One side is used to pull back excess sand to where it will be
needed next during the screeding process. The other rounded side
is used for filling in screed pipe marks and for touch-up across your
project. After removing your screed pipes, add some sand to the void
and pull the SANDPULL across the top. It will ride on the screeded
sand and fill in remaining voids.
Part # Description Dead Weight Trade Price
022202 Sand Pull 4 lbs (1.8 kg) $68.21
Part # Description Dead Weight Trade Price
022313 3.25’-5.4’ (100-165 cm) 20 lbs (9.1 kg) $364.28
022314 4.9’-8.5’ (150-260 cm) 20 lbs (9.1 kg) $429.99
022315 Handle (Set of 2) 7.3 lbs (3.3 kg) $125.77
022319 Handle Brackets (Set of 2) 4.5 lbs (2 kg) $108.58
pavetech.com
Screed
Level
SANDSCREED
• Sickle shape blade cuts into bedding sand without
creating upward movement
• Telescopes 39”-65” (100-165 cm) or 59”-102”
(150-260 cm)
• Adjustable height 0–5” (0-12.7 cm) on both sides
• Level indicator incorporated into the profile
• Screed guides on both sides
• Optional set of 2 pulling handles for relaxed &
ergonomically correct body position
Standard screed boards tend to raise off screed
rails when pulling back material. To counter this
lifting, pressing down and pulling back at the same
time was the only remedy. This forces the user into an
ergonomically incorrect posture. The SandSCreeD PrO
allows the weight of the sand within the profiles arc to
keep the blade down, allowing the operator to only pull
the blade. Side to side sawing is no longer necessary.
15
SANd SCREEdINg