&timber - Hume Doors & Timber

Recommendations

Info

eNTRANce dooRs 8 RegeNcy XR1 XR2 XR4 XR5 XR6 E N T R A N C E This premium door range incorporates heavy solid timber mouldings to the exterior side and feature routing, complemented with double feature routed design to the interior face. Doors and sidelites are solid construction (see p11). Standard duracote tempered hardboard faces for painting. dooRS ShoUld bE hUNG iN wEAthER PRotEctEd AREAS. VAucluse pRemIeR Popular designs for all applications in a premier door range. Solid doors with square rout designs and modern timber mouldings on the exterior face. Duracote tempered hardboard faces standard. Glass options include triple glaze for added energy conservation, sound reduction and security. dooRS ShoUld bE hUNG iN wEAthER PRotEctEd AREAS. E N T R A N C E XVP5 XVP6 XVP10* XVP11 XVP12 XVP13 XVP14 XVP20* * Made to order
XF1 Clear Glass E N T R A N C E b XF3 Clear Glass E N T R A N C E solIcoRe NOTE: All entrance doors must be fully sealed/ painted including top and bottom rails with enamel paints prior to weather exposure. A minimum 2 coats of sealer/undercoat followed by top coats. Light reflective colours recommended. c A XF8 Clear Glass E N T R A N C E duRAcoTe Available with primed tempered hardboard water resistant door faces. Unclashed. STOCK SIZES: 1980 x 710/760/810/860/ 910/960 x 40mm 3 hinges recommended for all solid doors. glAss opeNINg These classic back door designs available in solid construction with duracote tempered hardboard pre-primed faces, these doors can be glazed in either clear or Etchlite glass. Door size: 1980 x 760/810/860 x 40 Xf8 rout design exterior face only. E N T R A N C E solId coRe blocKboARd Laminated timber core, plywood door faces (incorporating phenolic glue line). STOCK SIZES: 2400 x 1200 x 35mm 2100 x 920 x 35mm Door can be trimmed or cut down to any size including cut outs for air grills, glass openings, etc. oVeRHeAd pRoTecTIoN With New Zealand’s climate extremes exterior/entrance doors will weather differently and timber doors are more susceptible to the elements than steel or aluminium. Depending on your location and aspect the required overhead protection will vary. The chart below will assist in determining the size of overhead protection which will vary depending on home design and adjacent walls. ovERhEAd PRotEctioN chARt Sheltered entry A = ½ B Exposed entry A = B Dimension ‘C’ – subject to adjacent walls – minimum width same width as entry frame Note: colour choice for your exterior door will also affect weathering. Dark colours absorb heat, accelerating door deterioration, warping and bowing. For door guarantee refer page 11. eNTRANce dooRs 9
Page 1 and 2: humedoors &timber JANUARY 2012 EffE
Page 3 and 4: sAVoy Xs28 RegeNcy XR4 NewINgToN XN
Page 5 and 6: XS11 XS28* XS28* XS45* NEw XS45* E
Page 7: XU2* XU10* XU4 XU20 XU6 Joinery doo
Page 11 and 12: coNsTRucTIoN oF dooRs TERMS AND CON
Page 13 and 14: For doors refreshingly different, t
Page 15 and 16: VIeNNA pAcIFIc cApRIce PRIMECOAT PC
Page 17 and 18: D O O R S Y S T E M smARTRobe dooR
Page 19 and 20: CODE US12 CROSS-SECTION OF FITTED D

&timber - Hume Doors & Timber

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?