Polishers - Flex North America, Inc.
Polishers - Flex North America, Inc.
Polishers - Flex North America, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Natural<br />
Stone and<br />
Concrete<br />
LWW 1506 VR<br />
255.122<br />
The versatile FLEX edge milling tool<br />
for marble and granite<br />
LWW 1506 VR is the "smaller sibling"<br />
of the LWW 2106. The LWW 1506 VR<br />
is designed to handle up to<br />
1-1/4” thick slabs for<br />
milling and grinding<br />
sinks, kitchen tops,<br />
counters, and tables.<br />
For use on both<br />
straight and<br />
curved edges.<br />
Caution: For safety<br />
reasons, this unit should be<br />
operated only in conjunction with<br />
the GFCI operator protection circuit breaker!<br />
SPECIFICATIONS LWW 1506 VR<br />
Speed, without load 2,200-6,500 RPM<br />
For slab thickness 3/4” - 1-1/4”<br />
Power input 10 AMP<br />
Weight 12-3/4 lbs<br />
LWW 2106 VR<br />
261.947<br />
The powerful FLEX edge<br />
milling tool for granite<br />
LWW 2106 VR is the "heavy<br />
duty" two-handed edge<br />
milling machine from<br />
FLEX. It is designed<br />
to handle up to 1-3/4”<br />
thick granite slabs.<br />
This product is ideally<br />
suited to round edges<br />
of larger natural stone<br />
surfaces (counters tops,<br />
tables or double basin<br />
kitchen sink holes). LWW 2106 VR is a<br />
portable tool yet has the power and flexibility<br />
of conventional stationary CNC machines.<br />
SPECIFICATIONS LWW 2106 VR<br />
Speed, without load 1,800-5,850 RPM<br />
For slab thickness 3/4” - 1-3/4”<br />
Power input 15 AMP<br />
Weight 22 lbs<br />
STANDARD EQUIPMENT<br />
1 Open-ended wrench 24 mm 198.781<br />
1 Splash guard<br />
1 GFCI operator protection<br />
257.456<br />
circuit breaker in cord 356.611<br />
1 guide carriage 255.465<br />
STANDARD EQUIPMENT<br />
1 Open-ended wrench 32 mm 251.475<br />
1 Open-ended wrench 22 mm 109.398<br />
1 Hex wrench 8 x 100 x 130 256.742<br />
1 Splash guard 257.226<br />
1 Guide carriage<br />
1 GFCI operator protection<br />
256.005<br />
circuit breaker in cord 359.521<br />
Wet Edge<br />
Milling Machines<br />
ADVANTAGES AT A GLANCE<br />
• FLEX four-fold full-wave electronics:<br />
with speed selection and consistent<br />
speed control, soft start, overload protection.<br />
• Aluminum guide carriage: with plastic<br />
balls for easy control, corrosion-protected<br />
• GFCI operator protector circuit breaker:<br />
integrated in cord<br />
• Quick-action, brass coupling: for 1/2”<br />
lego connector for water hoses<br />
• Tool fixture: G 1/2” spindle thread<br />
• Quality shut-off carbon brushes: protects<br />
the motor against damage<br />
Note: Adapters are sold separately.<br />
FLEX Metal composite housing<br />
A classic construction design by FLEX:<br />
A tough, heat-resistant, light aluminum<br />
die-cast outer shell. On the inside an<br />
insulated plastic shell for electrical protection<br />
and motor noise reduction. Plus<br />
solid brass carbon holders for optimal<br />
heat distribution.<br />
13<br />
1