M300 Filters - Amiad

Filtomat M300-3000 Filters
Technical Specifications
Filter Type M304LP M306LP M308P
General Data
Maximum flow rate*
80 m³/h
(350 US gpm)
150 m³/h
(660 US gpm)
300 m³/h
(1320 US gpm)
Inlet/Outlet diameter Flanged 4” (100 mm) Flanged 6” (150 mm) Flanged 8” (200 mm)
Filtration degrees 3000, 1500, 800, 400, 200, 150, 130, 100, 80, 50, 40, 25, 15 micron
Min. working pressure
2 bar (30 psi)
Can be lower if pressure is increased for flushing
Max. working pressure 10 bar (150 psi)
Max. working temperature 65°C (149°F)
Weight
Empty = 100 kg (220 lb)
Full = 180 kg (396 lb)
* Consult Amiad for optimum flow depending on filtration degree & water quality.
Flushing Data
Minimum flow for flushing
(at 2 bar-30 psi)
Reject water volume per flush
cycle (at 2 bar-30 psi)
50 m³/h
(220 US gpm)
140 liter
(37 US gallon)
Empty = 127 kg (279 lb)
Full = 250 kg (550 lb)
50 m³/h
(220 US gpm)
140 liter
(37 US gallon)
Flushing cycle time 7-10 seconds
Exhaust valve
2 x 2”
2 x 50 mm
2 x 2”
2 x 50 mm
Empty = 144 kg (316 lb)
Full = 284 kg (625 lb)
50 m³/h
(220 US gpm)
140 liter
(37 US gallon)
2 x 2”
2 x 50 mm
Flushing criteria Differential pressure of 0.5 bar (7psi), time intervals and manual operation
Screen Data
Filter area
Flat = 3000 cm² (465 in²)
4-layer = 4800 cm² (744 in²)
Flat = 3000 cm² (465 in²)
4-layer = 4800 cm² (744 in²)
Screen types Flat, 4-layer
*Construction Materials
Filter housing Epoxy-coated carbon steel 37-2. (Stainless Steel 316 on request)
Filter lid
Epoxy-coated carbon steel 37-2. (Stainless Steel 316 on request)
High density Polypropylene
Cleaning mechanism PVC and Stainless Steel 316L
Exhaust valve Brass, Stainless steel 316, BUNA-N
Seals BUNA-N
Control Aluminum, Brass, Stainless steel 316, PVC, Acetal
* Amiad offers a variety of construction materials. Consult us for specifications.
Flat = 3000 cm² (465 in²)
4-layer = 4800 cm² (744 in²)