Z-010 Tornador-Gun repair instructions - Cartec
Z-010 Tornador-Gun repair instructions - Cartec
Z-010 Tornador-Gun repair instructions - Cartec
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5. Screw the new spare part (C) with<br />
the internal hose with wrench size 14<br />
into the housing. Then screw the<br />
switching unit in place with wrench<br />
size 16 and brace with wrench size 14.<br />
7. Lay the blue <strong>Tornador</strong> hose (A) over<br />
the internal hose (C) and screw it into<br />
the housing (B) with wrench size 10.<br />
6. Wrap the thread of the blue <strong>Tornador</strong><br />
hose with sealing tape and remove any<br />
protruding ends of sealing tape with a<br />
knife.<br />
hose so that it is level with the blue<br />
<strong>Tornador</strong> hose (A). Then twist open the<br />
spout.
Change language