Alfo slipring columns

Slipring column Type SK 05-.. and SK09-.. 150/200A
58
Slipring column open, Protection IP00
Technical Data
SK05-.. (150A) SK09-.. (200A)
Current ratings: max. 150A, 100% ED max. 200A, 100% ED
Voltage: max. 660 V~, 800 V
Revolutions per minute: 1-100 revs/min. varying according to the installation
Number of poles: max. 12 depending on the conductor cross section
Pole pitch: 36 mm
Slipring: ø150 mm, material: MS-die casting
200A,connection M10
Brush gear: Industrial double support with 2 moving carbon brushes,
interchangeable.
150A, connection M8 300A, connection M10
Bronze carbon brushes 32x10 Bronze carbon brushes 45x16
On request, with special carbon brushes for specific operating
conditions
Connection box: None
On request, with direct connection according to quotation.
Insulation: Glass filament fabric tubeHGW 2375.4
Insulation group: C
Current values: Standard: 50 mA - 150A 50 mA - 200A
Ambient temperature: max. +50°C / -35°C
At +50°C the max. permissible amp. load must be
consequently reduced.
For higher temperatures, please contact the manufacturer.
Corrosion protection: Hot-galvanised steel parts, or VA-material 1.4301
Installation position: Vertical, hanging, horizontal, please contact the manufacturer
Special: Parallel connection of the rings
266
19
227
30
T.05
32 x 10
M12
ø 16
M12
M8 M10
150
113
45 x 16
33 105 122
35
Type 05
150A
SK05 SK09
105 122
22
ø 75 H7
40 x 4 u.>
3
2
1
PE
M8
Type 09
300A
T.09
With and without tongue
according to version
ø 16
18
18
12
36 36 36 36
35
2 x M8 x 20 DIN 914