spray heads and accessories - Rain Bird irrigation

LOW FLOW VALVE
Control Zone Components
■ The only valves in the industry made
specifically for drip irrigation systems,
making these the only valves that
can effectively handle particles at low
flow rates (45,4 to 1136 liters/hour).
■ These valves contain all of the features
of Rain Bird’s reliable DV valve,
coupled with a unique diaphragm
design that allows particles to pass
through at extremely low flow rates,
thereby preventing weeping of the
valve
■ Allows the filter to be safely placed
downstream of the valve since these
valves handle all sizes of particles
FEATURES
�� Ease of Service
- External bleed to manually flush
system of dirt and debris during
installation and system startup
- Internal bleed for spray-free manual
operation
�� Reliability
- Unique “double-knife” diaphragm
coupled with ½” diameter seat for
flawless operation at low flow rates.
- Double-filtered pilot flow design for
maximum reliability
SPECIFICATIONS
Flow : 45,42 to 1817 liters/hour
Pressure : 1,0 to 10,3 bars
ELECTRICAL SPECIFICATIONS
24 VAC 50/60 Hz (cycles/sec) solenoid
Inrush current : 0.30 (7.2 VA) at 60 Hz
Holding current : 0.19 A (4.56 VA)
DIMENSIONS
Height : 11,4 cm
Length : 10,7 cm
Width : 8,4 cm
MODELS
LFV-075
LFV-075: 3⁄4’’ (20/27) female threaded inlet and
outlet
LFV-075-9V: 3⁄4’’ (20/27) female threaded inlet and
outlet, latching solenoid
Unique diaphragm design that allows particles to
pass through at extremely low � ow rates.
LFV-075-9V
VALVES
Friction Loss Characteristics
Flow, l/hr Flow, l/s Pressure
bars
45,42 0,01 0,19
227 0,06 0,19
454 0,13 0,24
908 0,25 0,26
1362 0,38 0,30
1817 0,50 0,36
70 www.rainbird.eu