Safety Data Sheet - Laboratorium Dr. Deppe

More documents

Recommendations

Info

DR Safety Data Sheet according to 1907/2006/EC, Article 31 Page 2/7 Printing date 19.03.2009 Revision: 19.03.2009 Trade name: Instru Star · Storage: Store in a well-ventilated place. Keep cool. Store locked up. · Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations. 3 Composition/information on ingredients · Chemical characterization · Description: Mixture of substances listed below with nonhazardous additions. · Dangerous components: Laurylpropylendiamin C, Xn, N; R 22-35-50 Danger: 3.1.O/3; 3.2/1A Warning: 4.1.A/1 CAS: 67-63-0 EINECS: 200-661-7 Index number: 603-117-00-0 CAS: 107-21-1 EINECS: 203-473-3 Index number: 603-027-00-1 CAS: 10043-35-3 EINECS: 233-139-2 Index number: 005-007-00-2 propan-2-ol Xi, F; R 11-36-67 Danger: 2.6/2 Warning: 3.3/2A, 3.8/3 ethanediol Xn; R 22 Danger: 3.1.O/3 boric acid Repr. Cat. 2; T; R 60-61 Danger: 3.7/1B Fettalkoholethoxylat Xn, Xi; R 22-41 Danger: 3.1.O/3; 3.3/1 Fettalkoholethoxylat Xn, Xi; R 22-41 Danger: 3.1.O/3; 3.3/1 · Additional information: For the wording of the listed risk phrases refer to section 16. 4 First aid measures · General information: Immediately remove any clothing soiled by the product. · After inhalation: In case of unconsciousness place patient stably in side position for transportation. · After skin contact: Immediately wash with water and soap and rinse thoroughly. Wash with water and acidic soap. · After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor. · After swallowing: Drink plenty of water and provide fresh air. Call for a doctor immediately. 5 Fire-fighting measures · Suitable extinguishing agents: CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. · Protective equipment: No special measures required. 6 Accidental release measures (Contd. of page 1) 10-25% 2,5-10% 2,5-10% 2,5-10% 2,5-10% ≤ 2,5% · Person-related safety precautions: Wear protective equipment. Keep unprotected persons away. · Measures for environmental protection: Do not allow to enter sewers/ surface or ground water. (Contd. on page 3) EU
DR Safety Data Sheet according to 1907/2006/EC, Article 31 Page 3/7 Printing date 19.03.2009 Revision: 19.03.2009 Trade name: Instru Star · Measures for cleaning/collecting: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Use neutralizing agent. Dispose contaminated material as waste according to item 13. Ensure adequate ventilation. 7 Handling and storage · Handling: · Information for safe handling: Keep receptacles tightly sealed. · Information about fire - and explosion protection: No special measures required. · Storage: · Requirements to be met by storerooms and receptacles: No special requirements. · Information about storage in one common storage facility: Not required. · Further information about storage conditions: Keep container tightly sealed. 8 Exposure controls/personal protection (Contd. of page 2) · Additional information about design of technical facilities: No further data; see item 7. · Ingredients with limit values that require monitoring at the workplace: 107-21-1 ethanediol IOELV Short-term value: 104 mg/m³, 40 ppm Long-term value: 52 mg/m³, 20 ppm Skin · Additional information: The lists valid during the making were used as basis. · Personal protective equipment: · General protective and hygienic measures: Wash hands before breaks and at the end of work. Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing Avoid contact with the eyes and skin. · Respiratory protection: Not required. · Protection of hands: The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation Protective gloves · Material of gloves Natural rubber, NR Nitrile rubber, NBR The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. · Penetration time of glove material The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. (Contd. on page 4) EU
Page 1: DR Safety Data Sheet according to 1
Page 5 and 6: DR Safety Data Sheet according to 1
Page 7: DR Safety Data Sheet according to 1

Safety Data Sheet - Laboratorium Dr. Deppe

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?