16.pdf

Recommendations

Info

OEM / MRO PRODUCTS 16 ASSEMBLY & REPAIR Products for Both Maintenance/Repair and OEM Assembly Certain products are hard to keep in stock because everyone in the plant— from production to maintenance—uses them routinely. Today, with it’s highly respected Permatex ® brands, ITW Devcon offers field-proven products to improve reliability in both assembly and repair applications. Permatex ® products for both Assembly and Repair include: t Permatex ® liquid and gel threadlockers to prevent fastener loosening caused by shock or vibration, and to protect against rust and corrosion t Permatex ® retaining compounds to secure and protect non-threaded assemblies t Permatex ® thread sealants to lubricate and protect threads and prevent leakage in both high-pressure and low-pressure systems t Permatex ® anaerobic and RTV silicone form-in-place gasket makers, dressings, and general-purpose sealants
Permatex ® Liquid Threadlockers… Providing Threaded Fastener Reliability Permatex ® Threadlockers are superior to conventional lock washers, nylon inserts, and other mechanical devices because they secure the entire fastener assembly against loosening from shock or vibration and maintain fastener clamping forces. Threadlockers also seal the threads against leakage and prevent rust and corrosion. Available in a variety of strengths and temperature ranges, threadlockers remain the most reliable way to lock and seal threaded fasteners of all shapes and sizes, either before or after assembly. PERMATEX ® THREADLOCKER entire threaded area filled with threadlocker. oNe DRoP FITs ALL! Threads sealed— moisture can’t get inside. VS. Permatex ® Liquid Threadlockers Product Permatex ® Low Strength Threadlocker PURPLE Permatex ® Medium Strength Threadlocker BLUE Permatex ® Surface Insensitive Threadlocker BLUE Permatex ® Permanent Strength Threadlocker RED Permatex ® High Strength Threadlocker RED Permatex ® High Temperature Threadlocker RED Permatex ® Large Diameter Threadlocker RED Permatex ® Penetrating Grade Threadlocker GREEN Item Number 22210 22250 22225 24210 24250 24225 24201 24310 24350 24325 24301 26210 26250 26225 26201 27110 27150 27125 27101 27210 27250 27225 27201 27710 27750 27725 27701 29010 29050 29025 29001 LOCK WASHER Contact only under bolt— bolt can vibrate loose. Must use right size. Threads open— moisture can get in causing corrosion. Container Size 10 ml bottle 50 ml bottle 250 ml bottle 10 ml bottle 50 ml bottle 250 ml bottle 1 L bottle 10 ml bottle 50 ml bottle 250 ml bottle 1 L bottle 10 ml bottle 50 ml bottle 250 ml bottle 1 L bottle 10 ml bottle 50 ml bottle 250 ml bottle 1 L bottle 10 ml bottle 50 ml bottle 250 ml bottle 1 L bottle 10 ml bottle 50 ml bottle 250 ml bottle 1 L bottle 10 ml bottle 50 ml bottle 250 ml bottle 1 L bottle NoTes: 1 .375" x 16 phosphate steel 2 Fixture strength is equivalent to 20% of full cure strength THREADLOCKERS Typical Use Color Viscosity cP Up to 1/4" (6mm) 1/4" to 3/4" (6-20mm) 1/4" to 3/4" (6-20mm) 3/8" to 1" (10-25mm) 3/8" to 1" (10-25mm) 3/8" to 11/2" (10-38mm) 1" and over (25mm+) #2 to 1/2" (2.2-12mm) Purple Blue Blue Red 1,200/5,000 Thixotropic 1,200/6,000 Thixotropic 2,250/12,000 Thixotropic 1,800/5,000 Thixotropic Break/Prevail Torque in-lbs 1 62/27 115/53 180/62 189/275 Red 500 230/225 Red 10,000 180/270 Red 7,000 250/200 Green 12 90/310 Temperature Range -65° to 300°F (-54° to 149°C) -65° to 300°F (-54° to 149°C) -65° to 300°F (-54° to 149°C) -65° to 300°F (-54° to 149°C) -65° to 300°F (-54° to 149°C) -65° to 450°F (-54° to 232°C) -65° to 300°F (-54° to 149°C) -65° to 300°F (-54° to 149°C) Fixture Time 2/ Full Cure 20 min/ 24 hrs 20 min/ 24 hrs 20 min/ 24 hrs 20 min/ 24 hrs 20 min/ 24 hrs 30 min/ 24 hrs 60 min/ 24 hrs 20 min/ 24 hrs THREADLOCKERS Fixture with Primer Specific Gravity 5 min 1.05 5 min 1.00 5 min 1.08 5 min 1.10 5 min 1.10 5 min 1.11 5 min 1.12 3 min 1.08 17
Page 2 and 3: INTRODUCTION © 2009 ITW Devcon 2
Page 4 and 5: OEM ADHESIVES 4 OEM ADHESIVES Total
Page 6 and 7: EPOXIES 6 EPOXY ADHESIVES 2-Part St
Page 8 and 9: EPOXIES Devcon ® Food Grade Pot &
Page 10 and 11: METHACRYLATES 2-Part Structural Acr
Page 12 and 13: CYANOACRYLATES 12 INSTANT ADHESIVES
Page 14 and 15: UV ADHESIVES UV light-Cured Adhesiv
Page 18 and 19: THREADLOCKERS Permatex ® Low Stren
Page 20 and 21: RETAINING COMPOUNDS Permatex ® Bea
Page 22 and 23: THREAD SEALANTS Permatex ® Thread
Page 24 and 25: GASKETING Permatex ® Gasket Makers
Page 26 and 27: GASKETING Permatex ® the Right Stu
Page 28 and 29: CASTABLE URETHANES Urethane Casting
Page 30 and 31: RUBBER REPAIR Urethane Repair Compo
Page 32 and 33: MRO PRODUCTS MAINTENANCE & REPAIR P
Page 34 and 35: SURFACE PREPARATION The Key to Succ
Page 36 and 37: METAL REPAIR Devcon Metal Repair Pu
Page 38 and 39: METAL REPAIR Devcon ® Plastic Stee
Page 40 and 41: ABRASION-RESISTANT 40 WEARING COMPO
Page 42 and 43: FLOORING PRODUCTS Floor Repair/Patc
Page 44 and 45: EMERGENCY REPAIR EMERGENCY REPAIR E
Page 46 and 47: GASKET SEALANTS Gasket Sealants Per
Page 48 and 49: HAND CLEANERS Permatex ® Hand Clea
Page 50 and 51: INDEX 09128 . . . .45 09185 . . . .
Page 52: Technical Services: 1-800-933-8266

16.pdf

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?