Goodtool Brake Service Tools & Supplies 2011 Catalog

1
11
12
Universal Adaptor
Plus Mounting System
Use fewer
adaptors to
mount a wider
range of hubless
drums & rotors
2
10
9
3 4
• Mount hubless drums, rotors and composite rotors to 1" arbors
• Cones center workpieces with holes 2 5 ⁄32" to 6 1 ⁄4"
Description Order No. Includes
Master Adaptor Plus Mounting Kit AP-9000 q
Truck Drum Kit (must use with AP-4700) AP-5000 q
Hubless Locator Assembly AP-4700 q
1 Large Adaptor Cup with Spring (6.75" OD) AP-1039 x
2 Large Backing Plate (6.75" OD) AP-1035 x
3 Small Backing Plate (5.25" OD) AP-1036 x
4 Truck Backing Plate (7.40" OD) AP-1037 x x
5 Truck Centering Cone (5.125" x 6.250") AP-1040B x x
6 Truck Centering Cone (4.125" x 5.250") AP-1040A x x
7 Hubless Adaptor Cone (3.125" x 4.25") AP-1003B x x
8 Hubless Adaptor Cone (2.125" x 3.25") AP-1003A x x
9 Locator for 1" Arbor AP-1001 x x
10 Nut & Spacer AP-1009 x
11 Spanner Wrench HA-800W x x
12 Small Adaptor Cup with Spring (5.25" OD) AP-1038 x
Late Model Rotor Adaptor
Turn late model 3 ⁄4 &
1-ton rotor assemblies
without disassembly
• Locates from the rear bearing flange • Mounts to any 1" arbor
brake lathe • One-piece adaptor with four bolts
Description Order No.
Rotor Adaptor GT-29495
Replacement Bolt Set (4 Pc.) GT-29495-SET
9
GT-29495
8
11
7
7
10
For GM 4x4 ('92 & later),
Dodge Ram ('94 & later)
Ford 1-ton ('98 & later)
6
8
5
Large machined radius
makes assembly easy
Ford F-150 Adaptor
Machine 2004 & newer
Ford F-150 2WD rotors
without removing the bearings
• Fast, simple setup means less time spent on mounting the rotor
on your lathe • Designed by a technician and proven to fit rotors
with pressed in bearings • Two piece kit includes outboard
centering drive adaptor and rear centering adaptor
• Approved for late model Ford F-150 two-wheel
drive applications with pressed in bearings
Description Order No.
Ford F-150 Rotor Adaptor FRA-5532
1 3 ⁄4" dia. 180 Grit Flex-Hone® BH-1750
Rotor adaptor
includes 6 mounting
bolts
Captured Rotor Adaptor
Specially designed for
2004 & later Chevy Colorado &
GMC Canyon models
This one-piece rotor adaptor is self-centering and is compatible
with all 1" arbor lathes. Unlike most adaptors, you must mount this
set-up with the adaptor and machined side of the rotor toward the
lathe. This will allow the twin cutter to align properly. The adaptor
includes 6 mounting bolts. Order No. CRA-2004
GT-5062
For 1" Arbors
Truck Adaptor Sets
Description Order No. Includes
Standard Truck Set GT-5062 q
Master Truck Set GT-5060 q
Centering Cones 3.750" x 5.125" GT-5053 1 1
4.500" x 5.500" GT-5052
5.000" x 6.125" GT-5054 1
Bell Clamps 6.500" OD GT-5055 1 2
7.750" OD GT-5056 1
Heavy-duty Spring GT-5059 1 1
special orders available - ask your customer service representative for details
GT-5060
7