Product catalogue

Product catalogue April 2012

Fenix was founded in 1990 as one of the fi rst private companies in the Czech Republic following the “Velvet”
Revolution. The fi rst items produced were the successfully marketed ECOSUN electric radiant heating panels, however,
as market demand increased these products were followed by ECOFLEX electric convectors, ECOFLOOR heating
cables and mats and ECOFILM heating fi lms. The company also offers a wide range of supplementary products
including heating system controls, cable kits and cable mats. With the increase in demand the structure of the company
developed – for the reason of retaining maximum fl exibility a holding company structure was chosen, with individual
and independent members.
The following companies were incorporated successively: Fenix s.r.o. – plant producing electrical heating systems;
Fenix Trading s.r.o. – trading company; Fenix Slovakia s.r.o. – production and trading company, representing
FENIX in Slovakia; Fenix Group a.s. – a company which provides property management and services (strategic planning,
administration of property, economic and fi nancial services); Flexel International Ltd. – manufacturing and trading
company located in the United Kingdom. In 2008 FENIX Holding – acquired the production and trading company Aztec
Europe Ltd., – manufacturer of special applications, such as mirror demisting heaters, vivarium heaters, caravan and

ECOSUN – radiant heating panels
low and high temperature radiant ceiling panels
pages 4–6
MR – marble radiant panels for residential,
commercial and individual application
page 7
GR – glass radiant panels for residential,
commercial and individual application
pages 8–9
IRC PANELS – radiant heating for infrared cabins
pages 10–11
ECOFLOOR – heating cable systems
heating cable circuits and cable mats,
complete fl oor heating installation kits,
deicing gutters and eaves troughs, snow-melting,
de-icing outdoor surfaces, frost protection of pipes
pages 12–25
ECOFILM – heating fi lm systems
E-set – underfl oor heating, kit for DIY installation
F – underfl oor heating fi lm
C – radiant ceiling heating fi lm,
MHF – mirror fogging prevention
pages 26–29
ULTRATHERM – heating for vivariums and terrariums
pages 30–31
ECOFLEX – electric convectors
classic and glass convection heaters
pages 32–33
THERMOSTATS AND CONTROLS
regulation unit, control unit, room and fl oor sensors, and
regulators for reduction of main circuit breaker value
pages 34–36
STORAGE HEATERS
static and dynamic storage heaters
page 37
ATLANTIC – storage water heaters
10 – 150 L volume
page 38
SUPPLEMENTARY PRODUCTS
hand dryers, towel radiators
page 38
mobile home heating equipment. At the end of 2009/in early 2010 Fenix Holding acquired two other production and trading
companies: ACSO – production and trading company with its headquarters in France; CEILHIT –producer of heating cables and
trading company with its headquarters in Spain, covering the market in Spain, Portugal and South America.
Presently, the company Fenix Holding s.r.o. is one of the largest European producers of surface electric heating systems,
and currently exports to over 52 countries worldwide.

®
ECOSUN
Principle of infrared heating
Whereas in convection heating the air is warmed by a convector
which then transfers heat as it flows over the objects that
are to be heated (walls, furniture), Radiant heating panels
transfer heat mainly through radiant energy. Upon encountering
objects (walls, furniture, floors), radiant energy is partially reflected
(approx. 15 %), the majority (approx. 85 %) is absorbed by the
objects. This radiant energy is converted to heating energy as it
raises the temperature of the objects, which then transfer heat to
the cooler air by convection.
Thanks to unique technology Silicating, high temperature radiant
panels reach high emissivity up to 0,98 mu.
The principles mentioned create
the following advantages:
the surface of the radiant panel generates a heat flow
whose spectrum is in the wavelength not greater than
5 micrometers and is thus absorbed to a large degree
by the human body: people are therefore heated
in a manner similar to the objects in the room.
when the radiant heat flow increases the temperature of
the objects in the room of 20–22 °C, comfort conditions
are achieved even with air temperatures of 18–19 °C
which can lead to energy savings of 18–24 %.
radiant panels permit the temperature distribution in
a room to be more vertically balanced giving a 1–2
degree difference between the floor and the ceiling
(for convection heating the difference is given as
1 °C per metre of height, 30–50 cm of height).
there is less flow movement therefore dust particles due
to brownian movement are less thus reducing the risk of
illnesses – asthma, mucous membrane infection, etc.
increased wall temperatures mean a lower
possibility of surface condensation, albeit the
humidity in the room is not lowered.
glass is not “transparent” (we might say “transthermant”)
when it comes to radiation with wavelengths over 3 and
thus the radiant flow is not lost through windowpanes.
the panels do not require maintenance
Unique technologies
Fenix utilises unique state-of-the art technology in respect of the finished panel surfaces. (Thermoquartz and Thermocrystal for low temperature
panels and Silicating for high temperature panels).
Radiant heating by ECosun
4
radiant heating panels
Convection heating

LOW TEMPERATURE PANELS
ECOSUN G – a glass radiant panel derived from GR panels. Slim profi le – just 20 mm (panel with frame). The panel is supplemented
with thermal insulation, with a frame from eloxed aluminium and versatile fi xtures which enable installation both on a wall (vertically)
and on the ceiling (horizontally). This makes it a versatile product which combines the advantages of ECOSUN radiant panels and the
design of GR glass panels. Protection class II; length of supply cables 1 m. Option of installing on a class C or D fl ammable base.
TYPE [W] [V] Covering Dimmensions [mm] Weight [kg] Recommended clearance [m] Quantity on pallet Cat. No.
ECOSUN G 300 white 300
600×600×50* 7
40 5437110
ECOSUN G 600 white 600 1200×600×50* 14 20 5437112
ECOSUN G 300 black
ECOSUN G 600 black
300
600
230 IP 44
600×600×50*
1200×600×50*
7
14
vertical or horizontal
position
40
20
5437116
5437118
ECOSUN G 300 mirror 300 600×600×50* 10,2 40 5437126
ECOSUN G 600 mirror 600 1200×600×50* 19 20 5437128
* Thickness includes mounting fi xture, which is an inseparable part of the panel.
ECOSUN E – an alternative version of the ECOSUN G glass radiant panel. Slim profi le – just 20 mm (panel with frame).
For this panel, the front glass has been substituted by a panel with a plastic powder coating; is suitable e.g. for health care
applications. Protection class II; length of supply cables 1 m. Option of installing on a class C or D fl ammable base.
TYPE [W] [V] Covering Dimmensions [mm] Weight [kg] Recommended clearance [m] Quantity on pallet Cat. No.
ECOSUN E 300 white 300
ECOSUN K+ – heating panel used for warming church pews, desks in offi ces and administrative buildings. They can be
hung on a wall in the standard way; for installation on the ceiling it is necessary to order a ceiling frame. Class I.
Basic colour: brown, white Connection cable: 50 cm for 100–270 K+, 75 cm for 330–400K+
TYPE [W] [V] Covering Dimmensions [mm] Weight [kg] Recommended clearance [m] Quantity on pallet Cat. No.
ECOSUN 100 K+ 100
500×320×30 2,5
60 5401200
ECOSUN 200 K+
ECOSUN 270 K+
ECOSUN 330 K+
200
270
330
230 IP 44
750×320×30
1000×320×30
1250×320×30
3,7
5,2
6,6
vertical or horizontal
position
45
30
30
5401205
5401210
5401215
ECOSUN 400 K+ 400 1500×320×30 7,9 30 5401220
Ceiling fi xing frame for ECOSUN 100 K+, 200 K+, 270 K+, 330 K+, 400 K+
ECOSUN U – universal panel for dwelling and non-dwelling spaces, possibly mounted onto ceilings or into suspended ceilings. Class I.
Basic colour: white Connection cable: 100 cm
TYPE [W] [V] Covering Dimmensions [mm] Weight [kg] Recommended clearance [m] Quantity on pallet Cat. No.
ECOSUN 300 U 300
230 IP 44
5
600×600×50* 6,6
vertical or horizontal
position
40 5437140
ECOSUN E 600 white 600 1200×600×50* 11,3 20 5437142
* Thickness includes mounting fi xture, which is an inseparable part of the panel.
592×592×30 5,0 from 2,5 m 40 5401037
ECOSUN 600 U 600 230 IP 44
10,1 from 2,5 m 20 5401047
1192×592×30
ECOSUN 700 U 700 10,5 from 2,7m 20 5401171
ALUMINIUM FRAME – is intended for ECOSUN panels and has a purely aesthetic function. The body of the panel is composed of two
parts riveted together. Neither the gap formed by the connection of the front and rear parts nor the riveting itself are usually particularly
visible in the case of ceiling installation. However, if required the panel can be fi tted with the aluminium frame, which covers the join.
TYPE Cat. No.
Aluminium frame for ECOSUN 300U 5401228
Aluminium frame for ECOSUN 600U/700U 5401229
ECOSUN C/VT – heating panels only for mounting into suspended ceilings. Class I.
Basic colour: white
TYPE [W] [V] Covering Dimmensions [mm] Weight [kg] Recommended clearance [m] Quantity on pallet Cat. No.
ECOSUN 300 c 600/VT 300
574×574×35 4,6 min. 2,5 m 40 5401065
230 IP 20
ECOSUN 600 c 600/VT 600 574×1174×35 9,4 min. 2,5 m 20 5401075

ECOSUN IKP, IN, IN-2 – panels for industrial and agricultural applications (i.e. in workshops, greenhouses, livestock facilities). Class I.
Basic colour: brown Connection cable: 100 cm
TYPE [W] [V] Covering Dimmensions [mm] Weight [kg] Recommended clearance [m] Quantity on pallet Cat. No.
ECOSUN 700 IKP 700
HIGH TEMPERATURE PANELS
ECOSUN S / SB – for industrial halls, gyps, halls, workshops, wit coverage that corresponds to the given environment.
Suitable for drying of buildings. Class I. Covering IP x4. Basic colour: white (RAL 9002). For spaces with higher
humidity – agricultural structures, washing facilities, panels are produced in a corrosion-proof version SBs – stainless.
HALOGEN HEATERS
ECOSUN 700 IN 700 230 IP 65
ECOSUN 700 IN-2 700
IP 65
E Ex 2
Ceiling fi xing frame for type IKP, IN, IN-2
TYPE [W] [V] Weight [kg] Quantity on pallet Recommended clearance [m] Dimmensions [mm] Cat. No.
ECOSUN S 09
ECOSUN S 12
ECOSUN S 18
ECOSUN S 24
ECOSUN S 30
ECOSUN S 36
900
1200
1800
2400
3000
3600
230
230 / 400
2N
8
12,6
16,6
58
39
26
According to individual
conditions,
for full area 5–8 m,
zonal 3,4–4,5 m
1500×150×60
1500×250×60
1500×350×60
5401409
5401412
5401418
5401424
5401430
5401436
TYPE [W] [V] Weight [kg] Quantity on pallet Recommended clearance [m] Dimmensions [mm] Cat. No.
ECOSUN SBs 09
ECOSUN SBs 12
ECOSUN SBs 18
ECOSUN SBs 24
ECOSUN SBs 30
ECOSUN SBs 36
900
1200
1800
2400
3000
3600
230
230 / 400
2N
6
10,8
14,1
75
45
30
According to individual
conditions,
for full area 5–8 m,
zonal 3,4–4,5 m
1500×130×50
1500×230×50
1500×330×50
5401709
5401712
5401718
5401724
5101730
5401736
TILTABLE BRACKET – a tiltable bracket enables the installation of ECOSUN S/SBs panels at an angle, and thus the aiming of the heat fl ow
at the required area. The bracket can be used for ceiling as well as wall installation; the package contains 1 pair of brackets (two pieces).
TYPE Cat. No.
Halogen heaters – the high surface temperature of halogen tubes enables the use of the radiators in
areas where normal radiant panels wouldn’t be effective – for example, in outdoor areas for the heating
of terraces and balconies, or for the heating of large industrial halls with no heat cladding.
TYPE [W] [V] Covering Dimmensions [mm] Weight [kg] Recommended clearance [m] Cat. No.
HWP 1500 1500
IP 54 1192×592×30 9,3 2,5–3,0 20 5401176
Tiltable bracket for ECOSUN S 9–12 5401797
Tiltable bracket for ECOSUN S 18–36 5401798
Tiltable bracket for ECOSUN SBs 09–36 5401795
PROTECTIVE GRILLE – the protective grille protects the lamellas of ECOSUN S high-temperature
panels against mechanical damage (for example, by a ball in a gym) and simultaneously prevents
objects from coming into direct contact with the hot surface of the heating lamellas.
TYPE Cat. No.
Protective grille for ECOSUN S 9–12 5401790
Protective grille for ECOSUN S 18–24 5401792
Protective grille for ECOSUN S 30–36 5401794
IP 55 480×120×120 1,7 2,2–3,0 m 8102010
HN 4500 4500 230
590×430×140 6,5 3,0–4,5 m 8102035
IP 21
HN 6000 6000 590×430×140 6,5 3,5–5,5 m 8102040
6
1192×592×30 9,5
2,8–3,3 20 5401181
3,0–3,5 20 5401186

RADIANT PANELS
MR – marble radiant panels
MR marble radiant panels are primarily intended for heating
reception rooms, halls, bathrooms and others.
MR panel has an extremely aesthetic appearance and the radiant
heat from this natural material is very acceptable. The MR
panel consists of a robust polished marble plate, a heating element,
limiting thermostat , and a connection cable. This panel is
intended to be installed as a fi xed installation on a wall with the
connection cable connected to the installation box. These panels
are manufactured in various power outputs and are available in
5 marble designs.
As marble is a natural material there is the possibility of small
colour and texture variances.
MR PANELS – marble radiant panels (thermo fuse), IP 44, class II; Connection cable for 300–1000:100 cm, 1200: 150 cm;
Type of marble: Kavala, Volakas, Janina, Rosa, Veria Green;
Needed clearance: lower edge 5 cm / top and side edge 15 cm / front side 50 cm
IP 44
TYPE OUTPUT [W] Dimensions [mm] Weight [kg]
7
Quantity
on pallet / in crate
MR300 300 500×500×30 20 10 / 22
Marble Cat. No.
5438000
MR500 500 700×500×30 28 10 / 20 5438005
MR800 800 900×600×30 43 5 / 11 Volakas 5438010
MR1000 1000 1100×600×30 53 5 / 11 5438015
MR1200 1200 1300×600×30 62 5 / 7 5438020
MR300 300 500×500×30 20 10 / 22
5438200
MR500 500 700×500×30 28 10 / 20 5438205
MR800 800 900×600×30 43 5 / 11 Kavala 5438210
MR1000 1000 1100×600×30 53 5 / 11 5438215
MR1200 1200 1300×600×30 62 5 / 7 5438220
MR300 300 500×500×30 20 10 / 22
5438050
MR500 500 700×500×30 28 10 / 20 5438055
MR800 800 900×600×30 43 5 / 11 Janina 5438060
MR1000 1000 1100×600×30 53 5 / 11 5438065
MR1200 1200 1300×600×30 62 5 / 7 5438070
MR300 300 500×500×30 20 10 / 22
5438100
MR500 500 700×500×30 28 10 / 20 5438105
MR800 800 900×600×30 43 5 / 11 Rosa 5438110
MR1000 1000 1100×600×30 53 5 / 11 5438115
MR1200 1200 1300×600×30 62 5 / 7 5438120
MR300 300 500×500×30 20 10 / 22
5438250
MR500 500 700×500×30 28 10 / 20 5438255
MR800 800 900×600×30 43 5 / 11 Veria Green 5438260
MR1000 1000 1100×600×30 53 5 / 11 5438265
MR1200 1200 1300×600×30 62 5 / 7 5438270

GR – glass radiant panels
GR glass radiant panels feature an attractive and timeless design.
Due to the aesthetic appearance these panels are primarily intended
for heating reception rooms, offi ces and others. Glass panels
consist of a 12 mm toughened glass plate heating element, thermo
fuse, and connection cable. They are designed to be mounted on
a wall connecting the connection cable to the wiring box.
GR panels
GR PANELS – glass panels (thermo fuse), IP 44, class II; Connection cable: 100 cm; Panels are manufactured
in 4 series with different outputs. GR panels you can choose from fi ve colours: mirror, white, black, red, yellow-green;
Needed clearance: lower edge 5 cm / top and side edge 15 cm / front side 50 cm
TYPE Output [W] Dimensions [mm] Weight [kg]
8
Quantity
on pallet / in crate
GR 300 300 700×500×12 14 10 / 22 pcs
Glass colour Cat. No.
543760x
GR 500 500 900×600×12 21 5 / 12 pcs 543761x
white, black, red,
yellow-green
GR 700 700 1100×600×12 26 5 / 12 pcs 543762x
GR 900 900 1200×800×12 38 5 / 8 pcs 543763x
GR 500 500 900×600×8 21 5 / 12 pcs
5437611
mirror
GR 900 900 1200×800×8 38 5 / 8 pcs 5437631
GR SET – panels with wireless regulation
Use: These types are derived from standard GR panels but they are additionally fi tted with an integrated BPT-SP2 wireless receiver (see
the chapter THERMOSTATS AND CONTROLS) and a supply lead fi tted with a plug. A wireless programmable thermostat is supplied
with every panel as part of the package and so it is possible that, after unpacking the product, hanging it on the wall and connecting
it to the socket, the panel can be operated immediately, without any assistance from a specialized installation company. The panels are
intended mainly for supplementary installation, without the necessity of intervention into the existing electrical system. GR SET panels can
be supplemented with chromium-coated supports (see page 9) and thus a very aesthetic and convenient portable heater can be created.
Glass colours: white, black, yellow-green, red and mirror.
IP 44
TYPE Output [W] Dimensions [mm] Weight [kg] Glass colour Cat. No.
GR Set 300 300 700×500×12 14,9
543770x
GR Set 500 500 900×600×12 21
white, black, red,
543771x
GR Set 700 700 1100×600×12 28,4
yellow-green
543772x
GR Set 900 900 1200×800×12 38 543773x
GR Set 500 500 900×600×8 20
5437711
mirror
GR Set 900 900 1200×800×8 37 5437731

SUPPORTS FOR GR PANELS – for applications where
the GR panel cannot be hung on a wall (e.g. in the case
of glass surfaces), a set of chromium plated supports can
be used for the placement of the panels on the fl oor.
The GR panel is inserted into apertures in the supports and subsequently the supports
are affi xed to the panels with the help of adjustment screws. The panel is stable on these
supports; the bottom edge of the panel is 55 mm above the fl oor. For permanent installations,
we recommend that the supports are attached to the fl oor using screws – in the
base there are two openings with a diameter of 6 mm for screws with countersunk heads.
The supports are intended for use only with the GR type and are only for horizontal
installation. In the case of vertical installation (particularly for GR 1000 panels), there
is a signifi cantly higher risk that the user may accidentally knock the panel over. GR
panels on supports must not be exposed to excessive pressure – there is a danger of
tipping if it is placed freely, and if the supports are attached to the fl oor, there is a risk
of damage to the glass in the places where supports are attached.
NOTIFICATION
PRODUCT Cat. No.
Supports for GR panels
Contents of the set: chromium plated supports
– 2 pcs (base diameter 130 mm), plastic covers
for the brackets for the GR panel – 4 pcs, mains
plug (to be installed on the supply lead if the
panel is to be used as a mobile heater)
8000100 TYPE Description Weight [kg] Cat. No.
Simple towel rail (width 500 mm) GR (SET) 300 0,9 5437810
Simple towel rail (width 600 mm) GR (SET) 500 and 700 1,05 5437812
Simple towel rail (width 800 mm) GR (SET) 900 1,2 5437818
Double towel rail (width 500 mm) GR (SET) 300 1,8 5437820
Double towel rail (width 600 mm) GR (SET) 500 and 700 2,1 5437822
Double towel rail (width 800 mm) GR (SET) 900 2,4 5437824
ECOSUN, MR and GR radiant panels are only equipped with a limiting thermostat – suitable regulation is essential for correct and economical
operation; see the chapter THERMOSTATS AND CONTROLS. In the case of GR and GR SET glass panels, the limiting thermostat switches
off the panels at an average temperature of 90 °C, and therefore the real thermal output of the panels is approximately 10 % lower than the
wattage. For this reason and also for the improvement of the dynamics of the whole heating system, we recommend that the installed wattage
is increased by 20 % in contrast with the result of the heat loss calculation. GR and GR SET panels can be supplemented with chromium-coated
supports which enable the panel to be placed on the fl oor – e.g. in proximity to glass surfaces or to create a stylish portable heater.
9
STAINLESS STEEL TOWEL RAIL
– for GR/GR SET 300, 500, 700 and 900 panels
These Towel rail – designed as an accessory for GR and GR SET
radiant glass panels in all colour versions. It is made from a 4×30 mm
polished stainless steel sheet. After its installation, the standard panel is
transformed into a smart bathroom heater with a rail on which a towel
or bath towel can be hung.
The rail is intended only for panels installed vertically; however, the installation itself
is very easy. The openings in the back part of the rail are simply placed onto the top
two screws of the panel by which the heater will be attached to the wall. The panel is
then placed into the prepared hanging brackets. After the attachment nuts have been
tightened, the rail, which is placed between the back part of the panel and the hanging
bracket, is attached fi rmly. The rail is in the shape of a rectangle with the dimensions
530×90 mm; the distance between the attachment openings is 260 mm.

IRC PANELS radiant heating for infrared cabins
The principle behind infrared
cabins (infrared saunas)
In infrared cabins (also called infrared saunas), so-called radiant
heat is used – it works on a similar principle to ECOSUN heating
panels. In this case, however, it is aimed at warming the muscle
tissue of the user up to a depth of approximately 4 cm with the help
of infrared radiation. Thanks to this deep warming of the organism,
intensive sweating takes places at a lower air temperature
than in the case of classic steam saunas – during the whole of the
user’s stay in the cabin, the air temperature ranges between 30
and approx. 55 °C.
Infrared cabins can be used over longer intervals, with the aim of
freeing one’s body from harmful substances which are released
when sweating, or in shorter intervals in which the aim is to warm
up the muscle tissue before expected physical exercise – muscle
stretching, body-building, running etc.
10
Advantages of infrared
cabins with IRC panels
Infrared heating warms up the skin faster and the heat also
penetrates deeper into the tissues than heat from hot steam
Thanks to the lower air temperatures involved, they
are also suitable for patients with cardiovascular
diseases or respiratory diseases
In contrast with other types, they have considerably
lower acquisition costs and minimum negative infl uences
on the surrounding environment – humidity
The operation costs are lower by 1/3 to 1/2 in comparison
with steam saunas (lower air temperature in the cabin; up
to 80 % of energy is used for direct heating of the body)
Large-surface IRC radiant panels heat evenly across their
whole surface and for example in contrast with ceramic
radiators, the performance of which is concentrated
into a small surface with a high temperature, they heat
the whole body signifi cantly better and more evenly
The possibility of minimizing spatial requirements
– a cabin can be installed in an area as small
as 1 m2 – suitable also for smaller fl ats
Modular assembly without the necessity to use special
tools in connection with the IRT regulator – the option
of assembling the infrared cabin without expert aid

IRC RADIANT PANELS – FENIX has manufactured and supplied IRC panels for foreign producers of infrared cabins (Austria, Germany)
since 2004. Now it is offering these panels on the Czech market together with a control unit – IRT regulator – and this also as a DIY kit.
IP 44 PRODUCT Output [W] Voltage [V] Weight [kg] Dimensions [mm] Cat. No.
IRC Panel 1130x360/200 200
875x360 5401805
IRC Panel 1130x360/260 260 5,9 1130×360 5401810
IRC Panel 1330x360/310 310 1330x360 5401811
IRC Panel 650x780/330 330 230
650x780 5401813
IRC Panel 1130x780/575 575 11,5 1130×780 5401812
IRC Panel 1130x780/575 S (with a probe) 575 11,5 1130×780 5401814
IRC Panel 1330x780/680 S (with a probe) 680 1330×780 5401815
CONTROL UNIT – IRT 01 REGULATOR – The IRT regulator maintains a set temperature on the surface of radiant panels, as well as the
required operating time of the heating and lighting of the infrared cabin. It contains a power unit (installed within a cavity under the bench) to
which IRC panels are connected using plugs, and also a control unit, light and supply cable. Up to 6 IRC panels can be connected. All IRC
panels are equipped with a special connector and the offered sizes can be combined as needed; however, the total wattage mustn’t exceed
3.4 kW and one (only one) of the panels used must have an integrated temperature sensor. The power unit is connected to a 230 V socket,
protected with a 30 mA residual current device.
IP 44 DESCRIPTION Cat. No.
IRT 01 REGULATOR
Temperature setting 20–80 °C;
time setting 1 to 99 minutes; switch
Set contents: control unit including a connection cable; power unit with connectors;
3 m power cable with plug (230 V / 16 A); 3 m connection cable for lighting (light is
not included in the set); instructions; screws – 8 pcs.
Set selection
According to the size of the infrared cabin you wish to install, choose and combine the offered
panel sizes in such a way that they best cover the space within the infra-red cabin – the lower
and upper halves of the body. It is ideal if the panels surround the user on at least three sides.
There can be a maximum of six panels for every control unit, from which one (but
only one) must be equipped with an integrated temperature probe. The maximum
wattage of all the panels attached to one control unit can be up to 3.4 kW.
An IRT-01 regulator is necessary to control the panels. The regulator comes with
the set, which includes a control panel and power unit. The control panel should
be installed inside the infrared cabin within reach of the user. The power unit is
installed in a cavity under the bench and should not be easy to access.
The connecting leads for the IRC panels are, after installation on the wall, connected
to the power unit with the aid of connectors – the connectors from the panels, lighting,
control units and connecting leads have different dimensions, so it isn’t possible
to confuse them and connection can be carried out by a non-expert user.
If lighting is required it is also possible to connect a light to the power
unit; a connection cable comes as part of the set.
It is necessary to equip panels with a suitable protective cover, allowing the correct
operation of the panel. We recommend using the wooden covering frames that are
offered, as they are constructed size-wise to exactly fi t the dimensions of the IRC panels
Wooden frames not only fulfi l a protective function, but also attach panels to walls
– the panels alone are not fi tted with any mounting apertures or brackets.
11
4200040

®
ECOFLOOR
ECOFLOOR electric fl oor heating systems ensure ideal heat distribution
and, by decreasing undesirable air circulation, reduce dust
levels. These systems offer great comfort, economic and reliable
operation, and long lifetime. They preserve free fl oor space by
eliminating the need for various heating elements, radiators and
heat distribution systems. The principal advantage of electric fl oor
heating is easy and separate temperature control in individual
rooms. Once installed, it is completely maintenance free.
We provide 10 year warranty for underfl oor heating
cables and mats and 2 year warranty for cables used
for outdoor application (gutter, eaves, pipes).
12
Cable ASL1P
heating mats LD
Cable ADSV-T
heating mats LDTS, LSDTS
Cable ADSV
heating circuits ADSV
Cable ADSV+
heating circuits ADSV+
Cable ADSA
ultrathin mats CM
underfl oor heating systems
Overview of ECOFLOOR heating cables and recommended usage
Type
Wattage [W/m]
Number of heating cores
Protective screen
Protection against UV radiation
Thermal endurance of the jacket
*) for a short term (installation under asphalt)
Supplied as circuit
Supplied as mat
Direct-heating
Floor heating
Semi-storage
Storage
Surfaces
Anti-freeze
protection of
10 ●
● ● ●
ASL1P 15 1 ● 70 °C ● ● ●
18 ● ● ● ●
10 ●
● ● ●
ADSV 15 2 ● 70 °C ● ● ●
18 ● ● ● ●
ADSV-T 12 2 ● 70 °C ● ●
10 ● ●
● ●
ADSV+ 18 2 ● ● 80 °C ● ●
20 ● ● ● ●
ADSA 12 2 ● 70 °C ● ●
10 ● ●
● ●
ADPSV 18 2 ● ● 80 °C ● ● ● ●
20 ● ● ● ●
PSV
10
15
1
●
●
70 °C
●
●
●
●
●
●
20 ● ●
● ● ● ● ●
MAPSV 25 1 ● ● 80 °C ● ●
30 ● ● ● ● ●
15 ● ●
● ● ● ● ● ●
MADPSP
20
25
2
●
●
●
●
90 °C
240 °C*
●
●
●
●
● ●
●
●
●
●
●
30 ● ● ● ● ●
PDSP 28 2 ● ●
90 °C
200 °C*
● ●
PFP 12 2 ● ● 70 °C ● ●
PDS1P 40 2 ● 70 °C ● ●
Roofs
Pipes

Overview of special ECOFLOOR heating
cables and recommended usage
Type
Wattage [W/m]
Overview of ECOFLOOR heating mats and recommended usage
Cable PSV
heating circuits PSV, heating mats LPSV
Cable ADPSV
heating circuits ADPSV
Cable MAPSV
heating circuits MAPSV, heating mats MST
Cable MADPSP
heating circuits MADPSP, heating mats MDT
Cable PDSP
heating circuits PDSP
Cable PDS1P
for curing concrete
Number of heating cores
Protective screen
Protection against UV radiation
Thermal endurance of the jacket
Supplied as circuit
Supplied as mat
Direct-heating
Floor heating
Semi-storage
Storage
Surfaces
Anti-freeze
protection of
ELSR-M
10
15
2
●
●
●
●
65 °C
●
●
●
●
ELSR-N
20
30
2
●
●
●
●
80 °C
●
●
●
●
●
●
PCC 30 1 ● −40…60 °C ●
PC
25
50
2 −50…60 °C
●
●
PC-S
20
25
2
●
●
−50…60 °C
●
●
Type
Wattage [W/m]
Number of heating cores
Protective screen
Protection against UV radiation
Thermal endurance of the jacket
Direct-heating
Floor heating
CM 150 2 ● 90 °C ● ADSA
80 ●
● ●
LDTS 100 2 ● 70 °C ● ●
ADSV-T
160 ● ● ●
LD 160 1 ● 70 °C ● ● ASL1P
LSDTS
100
160
2
●
●
70 °C
●
●
ADSV-T
LPSV 100 1 ● 80 °C ● PSV
MST 300 1 ● ● 80 °C ● MAPSV
MDT 300 2 ● ● 90 °C ● ● MADPSP
Semi-storage
Storage
Heating of outdoor areas
Roofs
Type of heating cable
Pipes
13
Cable composition markings
1 2 3 4 5 6
M A D P S P
1 Resistance (heating) wire
M multi-resistance – stranded resistance wire
(to be used for higher outputs);
no letter is used for a non-stranded (simple) resistance wire
2 Core insulation
A FEP (fl uoropolymer)
P XLPE (cross-linked polyethylene)
3 Number of heating cores
D double-core cable;
no letter is used for a single-core cable
4 Plastic insulation (for outdoor applications,
higher mechanical ruggedness of cable)
P XLPE (cross-linked polyethylene);
no letter is used for a cable without
the second plastic insulation
5 Protection screen (for wet areas)
S full screen protection (tinned copper
wires and aluminium tape)
SL linear screen protection
no letter is used for a cable without screen protection
6 Jacket
P XLPE (cross-linked polyethylene)
1P PP-LDPE (mixed polypropylene & low density PE)
V PVC (polyvinyl chloride)
Cable ELSR-M
self-regulating cable for anti-freeze protection and
technological heating (10 and 15 W/m)
Cable ELSR-N
self-regulating cable for anti-freeze protection and
technological heating (20 and 30 W/m EExII)
PCC cable
heating circuits for anti-freeze protection –
heating of the insulating door seals of freezers
PC cable
heating cable with a constant linear wattage for
anti-freeze protection and process heating
PC-S cable
armoured heating cable (metal braiding)
with a constant linear wattage for anti-freeze
protection and process heating
Linear input of cable [W/m]
2 0 2 4 0
Total input of circuit [W]

DIRECT HEATING SYSTEMS
ECOFLOOR CABLES AND MATS
ECOFLOOR heating systems are available in two basic variants – heating cable circuits and heating mats.
In fact the two systems do not differ from one another very much. In both cases, the heating system consists of a heating
cable, either separate or fi xed to a supporting fi breglass cloth (heating mat). This modern fl oor heating system permits easy
and effective regulation. The heating cable circuit or mats are placed directly beneath tiles in a thin layer of permanently
fl exible cement so the tiled surface heats up relatively quickly (circa 20 min). Temperature control is sensitive and quick to
react. Heating cable circuits or mats are suitable for renovated fl oors where the fi nal fl oor height is not a constraint.
DIRECT HEATING SYSTEM
1 wear layer (ceramic fl oor tiling)
2 fl exible bonding cement
3 ECoFLooR ® heating mat
4 fl oor (limitation) probe in a protective tube (so-called goose neck)
5 load-bearing concrete fl oating board
6 steel reinforcement (so-called Kari mesh)
7 thermal insulation
8 base (concrete board)
14
DIRECT HEATING SYSTEM—RECONSTRUCTION
1 wear layer (ceramic fl oor tiling)
2 fl exible bonding cement
3 heating mat (cable) ECoFLooR ®
4 fl oor (limitation) probe in a protective tube (so-called goose neck)
5 F-BoARD supplementary thermal insulation
(shortens the warming time) (see page 25)
6 fl exible bonding cement
7 original fl oor (old fl oor tiling, concrete)

ECOFLOOR HEATING MATS
LDTS or LSDTS (self-adhesive) heating mat, twin conductor cable with a full protection
screen, width 50 cm, cold lead 1×3 m. LDTS mats are provided with selfadhesive
tape for affi xing to the fl oor. LSDTS mats have a self-adhering
mesh on their entire back surfaces.
LDTs / LsDTs packing
OUTPUT Type
[W] 160 W/m2 Surface
[m2 LDTS / LSDTS 160 W/m
Length Cat. No. Cat. No.
] [m] LDTS LSDTS
70 160/0.5 0,5 0,9 5530200 5531005
130 160/0.8 0,8 1,6 5530205 5531010
210 160/1.3 1,3 2,6 5530210 5531015
260 160/1.6 1,6 3,2 5530220 5531020
340 160/2.1 2,1 4,2 5530230 5531025
410 160/2.6 2,6 5,2 5530240 5531030
500 160/3.0 3,0 6,0 5530250 5531035
560 160/3.4 3,4 6,7 5530255 5531040
670 160/4.2 4,2 8,3 5530260 5531045
810 160/5.1 5,1 10,2 5530270 5531050
1000 160/6.1 6,1 12,3 5530280 5531055
1210 160/7.6 7,6 15,1 5530290 5531060
1400 160/8.8 8,8 17,6 5530190 5531080
1800 160/11.0 11,0 22,0 5530192 5531085
2150 160/13.3 13,3 26,6 5530194 5531090
2600 160/16.3 16,3 32,5 5530196 5531095
2
LDTs / LsDTs
heating mat
OUTPUT Type
[W] 100 W/m2 Surface
[m2 LDTS / LSDTS 100 W/m
Length Cat. No. Cat. No.
] [m] LDTS LSDTS
60 100/0.6 0,6 1,2 5530401 5531105
105 100/1.0 1,0 2,1 5530403 5531110
180 100/1.8 1,8 3,6 5530405 5531115
220 100/2.2 2,2 4,4 5530410 5531120
290 100/2.9 2,9 5,8 5530415 5531125
410 100/4.1 4,1 8,2 5530420 5531130
460 100/4.7 4,7 9,4 5530425 5531135
560 100/5.6 5,6 11,2 5530430 5531140
820 100/8.2 8,2 16,5 5530440 5531145
1000 100/10.2 10,2 20,3 5530450 5531150
1200 100/11.8 11,8 23,7 5530460 5531155
1800 100/17.9 17,9 35,8 5530470 5531160
2
Heating mats LDTS available also 120 W/m 2 and 150 W/m 2 .
LD heating mat, single conductor cable with a full protection screen, width up to 3 m 2 –
30 cm, over 3 m 2 – 50 cm, cold lead 2×5 m
LD mat
Packing in PE foil.
LD 160 W/m 2
OUTPUT
[W]
Type LD
160 W/m 2
ECOFLOOR Installation – Heating Mat
1) Unroll the heating mat according to the layout drawing.
2) If you need to leave a space under fi xed furniture, cut out the necessary part of the cloth and span the space with the cable (see fi g. 2).
3) Level the layer of fl exible cement with a smooth trowel.
4) Lay tiling on small areas (up to 4 m 2 ) immediately, and on larger areas after 24 hours.
Surface
[m 2 ]
15
Width
[m]
Length
[m]
Cat. No.
100 160/0.6 0,6 0,3 2,0 5530005
150 160/0.9 0,9 0,3 3,0 5530007
180 160/1.1 1,1 0,3 3,6 5530010
300 160/1.8 1,8 0,3 6,1 5530020
360 160/2.3 2,3 0,3 7,6 5530030
500 160/3.0 3,0 0,3 10,0 5530040
700 160/4.3 4,3 0,5 8,6 5530050
850 160/5.3 5,3 0,5 10,6 5530060
950 160/5.9 5,9 0,5 11,8 5530070
1150 160/7.2 7,2 0,5 14,4 5530080
1700 160/10.7 10,7 0,5 21,4 5530090
2000 160/12.4 12,4 0,5 24,9 5530100
2500 160/15.7 15,7 0,5 31,3 5530110
3000 160/18.8 18,8 0,5 37,6 5530120
LDTS 160 W/m 2
OUTPUT
[W]
LDTS 80 W/m 2
OUTPUT
[W]
Type
160 W/m 2
Type
80 W/m 2
Surface
[m 2 ]
Surface
[m 2 ]
Length
[m]
Length
[m]
Cat. No.
LDTS
80 160-0,5 0,5 1,0 5540001
160 160-1 1,0 2,0 5540002
240 160-1,5 1,5 3,0 5540003
320 160-2 2,0 4,0 5540004
400 160-2,5 2,5 5,0 5540005
480 160-3 3,0 6,0 5540006
560 160-3,5 3,5 7,0 5540007
640 160-4 4,0 8,0 5540008
800 160-5 5,0 10,0 5540009
960 160-6 6,0 12,0 5540010
Cat. No.
LDTS
60 80/0.8 0,8 1,5 5531502
105 80/1.3 1,3 2,6 5531504
180 80/2.3 2,3 4,5 5531506
220 80/2.8 2,8 5,5 5531508
290 80/3.6 3,6 7,2 5531510
410 80/5.1 5,1 10,2 5531512
460 80/5.8 5,8 11,5 5531514
560 80/7.0 7,0 14,0 5531516
820 80/10.3 10,3 20,5 5531518
1000 80/12.5 12,5 25,0 5531520
1200 80/15.0 15,0 30,0 5531522
1800 80/22.5 22,5 45,0 5531524
ULTRA THIN CM MATS – a very thin two
conductor cable with a protective screen –
suitable for damp areas (bathrooms, laundry
rooms) as well as for standard rooms – ideal
for placement into adhesive sealing cement
directly under floor tiling; Ø of cable
2.4–2.7 mm, cold lead – 1×2.5 m.
CM 150 W/m 2
OUTPUT
[W]
Type
Surface
[m 2 ]
Length
[m]
Cat. No.
150 CM150/1 1,0 2,0 5540103
225 CM150/1,5 1,5 3,0 5540105
300 CM150/2 2,0 4,0 5540107
375 CM150/2,5 2,5 5,0 5540109
450 CM150/3 3,0 6,0 5540111
600 CM150/4 4,0 8,0 5540113
750 CM150/5 5,0 10,0 5540115

ECOFLOOR HEATING CABLE CIRCUITS
ADSV heating cable, a twin conductor cable with a full protection screen suitable for wet areas.
For direct fl oor heating or fl oor renovating (installation under tiles).
Cable diameter 3.6–4.6 mm.
Cold tail 1×3 m.
Cables on drums Heating circuits
TYPE
(Ohm/m)
Cat. No.
122,5 2001510
38,72 2001515
14,020 2001520
8,960 2001525
5,232 2001530
3,584 2001535
2,568 2001540
2,050 2001545
1,382 2001550
0,926 2001555
0,638 2001560
0,424 2001565
0,310 2001570
0,196 2001575
0,136 2001580
Cables on drums
TYPE
(Ohm/m)
Cat. No.
61,25 2005178
27,13 2005179
19,36 2005180
7,010 2005181
4,480 2005182
2,616 2005183
1,284 2005185
0,857 2005187
0,691 2005188
0,463 2005190
0,212 2005192
0,155 2005193
0,068 2005195
OUTPUT
[W]
Type ADSV
10 W/m
LENGTH
[m]
Cat. No.
65 10065 6,6 2232100
120 10120 11,4 2232105
200 10200 18,9 2232110
250 10250 23,6 2232115
320 10320 31,6 2232120
400 10400 36,9 2232125
450 10450 45,9 2232130
520 10520 49,6 2232135
600 10600 63,9 2232140
750 10750 75,8 2232145
950 10950 87,0 2232150
1100 101100 114,5 2232155
1300 101300 131,3 2232160
1700 101700 158,5 2232165
2000 102000 194,5 2232170
Heating circuits
OUTPUT
[W]
Cable on drum Cable circuit on carton reel.
standard packing.
Type ASL1P
10 W/m
LENGTH
[m]
Cat. No.
160 10160 17,0 2200160
280 10280 27,0 2200280
350 10350 33,7 2200350
450 10450 45,0 2200450
640 10640 64,0 2200640
800 10800 77,2 2200800
960 10960 80,0 2200960
1100 101100 103,9 2201100
1600 101600 156,0 2201600
1900 101900 179,6 2201900
3000 103000 259,3 2203000
OUTPUT
[W]
16
Type ADSV
15 W/m
LENGTH
[m]
Cat. No.
80 15080 5,4 2242405
140 15140 9,8 2242407
240 15240 15,7 2242410
300 15300 19,7 2242415
400 15400 25,3 2242420
470 15470 31,4 2242425
550 15550 37,4 2242430
630 15630 41 2242435
750 15750 51,1 2242440
950 15950 59,9 2242445
1100 151100 75,1 2242450
1350 151350 93,3 2242455
1600 151600 106,7 2242460
2400 152400 162,1 2242465
ASL1P heating cable, a single-conductor cable with a full protection screen suitable for wet areas.
For direct fl oor heating (installation under tiles).
Cold lead 2×5 m. Cable diameter 2.9–3.6 mm. Packing in PE foil.
OUTPUT
[W]
Type ASL1P
15 W/m
LENGTH
[m]
Cat. No.
200 15200 13,7 2201000
340 15340 22,2 2201005
420 15420 28,1 2201010
550 15550 36,8 2201015
800 15800 51,5 2201020
960 15960 64,3 2201025
1070 151070 71,5 2201030
1300 151300 87,9 2201035
1900 151900 131,3 2201040
2200 152200 155,1 2201045
3400 153400 228,8 2201055
ECOFLOOR Installation – Heating Cable Circuit
1) Create loops of the heating cable across the entire base (a spacing guide may be used, as shown).
2) Fix the cable to the base using the self-adhesive tape or GRUFAST fastening strips.
3) Level the layer of fl exible cement with a smooth trowel.
4) Lay tiling on small areas (up to 4 m 2 ) immediately, and on larger areas after 24 hours.
OUTPUT
[W]
Type ADSV
18 W/m
LENGTH
[m]
Cat. No.
160 18160 8,50 2243120
260 18260 14,50 2243125
320 18320 18,50 2243130
420 18420 24,00 2243135
520 18520 28,40 2243140
600 18600 34,4 2243145
680 18680 37,9 2243150
830 18830 46,1 2243155
1000 181000 57,5 2243160
1200 181200 68,9 2243165
1500 181500 83,2 2243170
1700 181700 100,4 2243175
2200 182200 122,7 2243180
2600 182600 149,6 2243185
OUTPUT
[W]
Type ASL1P
18 W/m
Packing in carton
box available
LENGTH
[m]
Cat. No.
210 18210 11,9 2201060
350 18350 19,7 2201062
450 18450 24 2201064
570 18570 32,5 2201066
820 18820 46 2201068
1000 181000 56,5 2201070
1100 181100 63,7 2201072
1400 181400 74,7 2201074
2000 182000 114,2 2201076
2400 182400 130,1 2201078
3000 183000 164,6 2201080
3500 183500 203,4 2201082

KITS FOR DO-IT-YOURSELF INSTALLATION
Kits for do-it-yourself installation have been designed for those users who do not want a complete electrical heating system but a comfortable,
warm fl oor in a specifi c area (e.g. bathroom or kitchen). The kits include everything needed to install the fl oor heating system and are very
reasonably priced. They are sold in two variants:
ECOFLOOR CableKit
OUTPUT
[W]
Type CK
(10 W/m)
AREA [m 2 ]
160 W/m 2
AREA [m 2 ]
130 W/m 2
AREA [m 2 ]
100 W/m 2
LENGTH
[m]
Cat. No.
65 10065 0,4 0,5 0,65 6,6 2360094
120 10120 0,75 0,95 1,2 11,4 2360097
200 10200 1,25 1,6 2,0 18,9 2360100
250 10250 1,6 2,0 2,5 23,6 2360102
320 10320 2,0 2,6 3,2 31,6 2360104
400 10400 2,5 3,2 4,0 36,9 2360106
450 10450 2,8 3,6 4,5 45,9 2360108
520 10520 3,25 4,0 5,2 49,6 2360109
600 10600 3,75 4,8 6,0 63,9 2360110
750 10750 4,7 6,1 7,5 75,8 2360112
950 10950 5,9 7,7 9,5 87,0 2360114
1100 101100 6,9 8,9 11,0 114,5 2360116
1300 101300 8,1 10,5 13,0 131,3 2360118
1700 101700 10,6 13,1 17,0 158,8 2360119
2000 102000 12,5 16,2 20,0 194,5 2360120
Cable kit includes
heating cable ADSV on carton reel
thermostat Fenix Therm 100 with fl oor sensor
protection tube for fl oor sensor
adhesive fi xing tape
template to plane cable runs for 100 W/m 2 ,
130 W/m 2 and 160 W/m 2
installation manual
17
ECOFLOOR ComfortMat
OUTPUT
[W]
Type CM
160 W/m 2
AREA
[m 2 ]
LENGTH
[m]
Cat. No.
70 12070-165 0,5 0,9 5590094
130 12130-165 0,8 1,6 5590097
210 12210-165 1,3 2,6 5590100
260 12260-165 1,6 3,2 5590105
340 12340-165 2,1 4,2 5590110
410 12410-165 2,6 5,2 5590115
500 12500-165 3,0 6,1 5590120
560 12560-165 3,4 6,7 5590122
670 12670-165 4,2 8,3 5590125
810 12810-165 5,1 10,2 5590130
1000 121000-165 6,1 12,3 5590135
1210 121210-165 7,6 15,1 5590140
1400 121400-165 8,8 17,6 5590145
OUTPUT
[W]
Type CM
100 W/m 2
AREA
[m 2 ]
LENGTH
[m]
Cat. No.
180 8180-105 1,9 3,6 5590148
220 8220-105 2,2 4,4 5590150
290 8290-105 2,9 5,8 5590152
410 8410-105 4,1 8,2 5590155
460 8460-105 4,7 9,4 5590157
560 8560-105 5,6 11,2 5590160
820 8820-105 8,2 16,5 5590165
Width of the heating mat is 50 cm
Comfort mat includes
heating mat LDTS
digital touch screen thermostat TFT
protection tube for fl oor sensor
installation manual
It is recommended that you install F-Board insulated tile backer
board before laying CK or CM. This will ensure quicker warm up
times and reduce running costs (see page 25).

SEMI-STORAGE AND STORAGE HEATING
ECOFLOOR CABLES AND MATS
Heating cables or mats in semi-storage systems are placed
in a layer of concrete 4–5 cm thick. The mat’s recommended
output wattage is 160 W/m 2 . Heat is accumulated for 16
hours a day at a time when electricity costs are lowest. The
accumulated heat is radiated from the fl oor surface not
only during the process, but also for a further 8 hours. One
effi cient solution is to divide the total desired heating system
70/30 between the fl oor heating and another source, such
as a convection heater or an ECOSUN radiant panel.
SEMI-STORAGE SYSTEM
1 wear layer (fl oor tiling, carpet, PVC, laminate)
2 fl oor (limitation) probe in a protective tube (so-called goose neck)
3 load-bearing concrete fl oating board
4 steel reinforcement (so-called Kari mesh)
5 ECoFLooR ® heating mat (cable)
6 thermal insulation
7 base (concrete board)
18
Storage fl oor heating is a system that takes advantage of
cheaper electricity tariffs – usually at night. During this time,
heat is accumulated into the mass of the fl oor using ECOFLOOR
electrical heating cables or mats. Throughout the rest of the
day, the heat is gradually released from the fl oor to the room.
In storage systems, heating mats or cables are placed in a layer
of concrete 10 to 14 cm thick. The accumulated—stored—heat
is then released during the day into the area to be heated.
We recommend an output wattage of 250 to 300 W/m 2 for
ECOFLOOR mats used in this type of system. Eight hours of
low-tariff electricity should be used to accumulate the heat.
STORAGE ECOFLOOR HEATING
1 wear layer (fl oor tiles, carpet, PVC, laminate)
2 fl oor (limitation) probe in a protective tube (so-called goose neck)
3 concrete storage layer
4 ECoFLooR ® heating mat (cable)
5 concrete storage layer
6 steel reinforcement (so-called Kari mesh)
7 thermal insulation
8 base (concrete board)

ADSV+ heating cable, a two-conductor cable with a full protection
screen. The sheathing of the cable is resistant against
UV radiation and is intended for fl oor heating and
the removal of snow and ice from roofs and eaves
troughs. 1×3 m cold lead. Ø 5.0 mm.
Heating circuits
OUTPUT
[W]
Type ADSV+
10 W/m
PSV heating cable, a single-conductor cable with a full protection screen for
storage and semi-storage heating.
Cables on drums
TYPE
Cat. No.
(Ohm/m)
19,36 2001210
7,01 2001215
4,48 2001220
2,616 2001225
1,792 2001230
1,284 2001235
1,025 2001240
0,857 2001245
0,691 2001250
0,54 2001255
0,463 2001260
0,319 2001265
0,212 2001270
0,155 2001275
0,098 2001280
0,068 2001285
LENGTH
[m]
Cat. No.
120 10120 11,4 2253000
200 10200 18,9 2253005
250 10250 23,6 2253010
320 10320 31,6 2253015
400 10400 36,9 2253020
450 10450 45,9 2253025
520 10520 49,6 2253030
600 10600 63,9 2253035
750 10750 75,8 2253040
950 10950 87,0 2253045
1100 101100 114,5 2253050
1300 101300 131,3 2253055
1700 101700 158,5 2253060
2000 102000 194,5 2253065
Cold lead 2×5 m. Cable diameter 4.5–5.1 mm.
Heating circuits
OUTPUT Type PSV LENGTH
[W] 10 W/m [m]
Cat. No.
OUTPUT Type PSV
[W] 15 W/m
170 10170 16,1 2320020
280 10280 28,0 2320025
350 10350 34,0 2320030
450 10450 46,0 2320035
550 10550 53,7 2320040
640 10640 64,4 2320045
720 10720 71,7 2320050
800 10800 79,1 2320055
870 10870 88,0 2320060
960 10960 100,0 2320065
1100 101100 106,8 2320070
1280 101280 129,6 2320075
1600 101600 157,9 2320080
1900 101900 189,6 2320085
2500 102500 234,7 2320090
3000 103000 277,8 2320095
PSV cable circuit
a single-conductor cable
with 2×5 m cold leads.
Packing in carton box.
OUTPUT
[W]
Type ADSV+
18 W/m
LENGTH
[m]
Cat. No.
160 18160 8,5 2253100
260 18260 14,5 2253105
320 18320 18,5 2253110
420 18420 24,0 2253115
520 18520 28,4 2253120
600 18600 34,4 2253125
680 18680 37,9 2253130
830 18830 46,1 2253135
1000 181000 57,5 2253140
1200 181200 68,9 2253145
1500 181500 83,2 2253150
1700 181700 100,4 2253155
2200 182200 122,7 2253160
2600 182600 149,6 2253165
LENGTH
[m]
19
OUTPUT
[W]
Cat. No.
200 15200 13,7 2320110
340 15340 22,2 2320115
420 15420 28,1 2320120
550 15550 36,7 2320125
660 15660 44,7 2320130
800 15800 52,3 2320135
880 15880 58,6 2320140
960 15960 64,1 2320145
1070 151070 71,5 2320150
1210 151210 81,0 2320155
1300 151300 84,1 2320160
1580 151580 104,6 2320165
1900 151900 128,6 2320170
2200 152200 150,3 2320175
2800 152800 189,4 2320180
3400 153400 227,5 2320185
ADPSV heating cable, a twin conductor cable with a full protection
screen is suitable for semi-storage
and storage fl oor heating in living areas.
Class M2. Cold lead 1×5 m. Ø 5.0–
5.9 mm.
Type ADPSV
18 W/m
LENGTH
[m]
Cat. No.
160 18160 8,5 2249960
260 18260 14,5 2249963
320 18320 18,5 2249966
420 18420 24,0 2249969
520 18520 28,4 2249972
600 18600 34,4 2249975
740 18740 41,8 2249976
830 18830 46,1 2249978
1000 181000 57,5 2249981
1200 181200 68,9 2249984
1500 181500 83,2 2249987
1700 181700 100,4 2249990
2200 182200 122,7 2249992
2600 182600 149,6 2249993
ADPSV cable circuit
a twin conductor cable
ADsV+, ADPsV packing
LPSV heating mat, single conductor cable with a
full protection screen, width
50 cm, cold lead 2×5 m.
Packed on a cardboard tube
and sealed in PE foil.
OUTPUT
[W]
Type LPSV
100 W/m 2
Surface
[m 2 ]
Length
[m]
Cat. No.
180 LPSV 1,8 1,8 3,6 5520352
300 LPSV 3 3,0 6,0 5520354
370 LPSV 3, 3,7 7,4 5520356
480 LPSV 3,7 4,8 9,6 5520358
580 LPSV 5,8 5,8 11,6 5520360
700 LPSV 7 7,0 14,0 5520362
770 LPSV 7,7 7,7 15,4 5520364
850 LPSV 8,5 8,5 17,0 5520366
940 LPSV 9,4 9,4 18,8 5520368
1050 LPSV 10,5 10,5 21,0 5520370
1150 LPSV11,5 11,5 23,0 5520372
1400 LPSV 14 14,0 28,0 5520374
1700 LPSV 17 17,0 34,0 5520376
2000 LPSV 20 20,0 40,0 5520378
2500 LPSV 25 25,0 50,0 5520380
Packing in carton
box available

OUTDOOR APPLICATIONS
Ice and snow melting
Installing electric heating cables in outdoor areas,
together with a thermostat, prevents both ice formation
and snow accumulation. Once installed, the system works
entirely automatically and is only operational when it is
snowing or if ice is forming on roads and walkways.
De-icing gutters and eaves troughs
In all parts of Europe other than in the south, winter brings
a heavy load to many buildings as ice builds up in the
gutters and eaves troughs. Installing an ECOFLOOR
electric heating cable (with a protective screen) into
gutters and eaves troughs is a good solution for such
problems. The cables are installed using special plastic clips
placed inside gutters and eaves troughs. We recommend
a linear wattage of 20 W/m for the de-icing cables.
Frost protection of pipes
Many homeowners and other users of piping have
many troubles in the winter due to freezing pipes.
This especially applies to pipes for water piping, but
other liquids used in industrial technologies can also
freeze or solidify. During long spells of below-freezing
temperatures, even very well-insulated piping can freeze.
Supplementary heating is a reliable preventive solution.
20

MAPSV heating cable, a single-conductor cable with a full protection
screen and protection against UV radiation. Suitable for heating
outdoor surfaces. Cold lead 2×5 m. Ø 5.0–5.5 mm.
Cables on drums Heating circuits
TYPE
(Ohm/m)
Cat. No.
9,00 2000850
6,50 2000852
3,20 2000854
1,35 2000856
1,00 2000858
0,60 2000860
0,36 2000862
0,25 2000864
0,183 2000866
0,155 2000868
0,098 2000870
0,068 2000872
0,04 2000874
MAPSV cables 400 V
OUTPUT Type MAPSV
[W] 20 W/m
LENGTH
[m]
Cat. No.
340 20340 17,3 2322500
400 20400 20,3 2322502
570 20570 29,0 2322504
880 20880 44,5 2322506
1030 201030 51,4 2322508
1350 201350 65,3 2322510
1750 201750 84,0 2322512
2100 202100 100,8 2322514
2400 202400 120,4 2322516
2600 202600 131,3 2322518
3300 203300 163,6 2322520
4000 204000 194,5 2322522
5100 205100 259,3 2322524
OUTPUT
[W]
Type MAPSV
20 W/m – 400 V
LENGTH
[m]
Cat. No.
600 20600 29,6 2322650
700 20700 35,2 2322652
1000 201000 50,0 2322654
1550 201550 76,5 2322656
1800 201800 88,9 2322658
2300 202300 115,9 2322660
3000 203000 148,1 2322662
3500 203500 182,9 2322664
4200 204200 208,2 2322666
4600 204600 224,4 2322668
5800 205800 281,5 2322670
7000 207000 336,1 2322672
9000 209000 444,4 2322674
MST mats, 230 V, width 0,5 m
OUTPUT
[W]
Type MST
300 W/m2 AREA
[m2 ]
LENGTH
[m]
Cat. No.
450 23MST 300/1,5-0,5 1,5 3,0 5501100
600 23MST 300/2-0,5 2,0 4,0 5501105
900 23MST 300/3-0,5 3,0 6,0 5501110
1200 23MST 300/4-0,5 4,0 8,0 5501115
1500 23MST 300/5-0,5 5,0 10,0 5501120
1800 23MST 300/6-0,5 6,0 12,0 5501125
2100 23MST 300/7-0,5 7,0 14,0 5501130
2400 23MST 300/8-0,5 8,0 16,0 5501132
2700 23MST 300/9-0,5 9,0 18,0 5501135
3000 23MST 300/10-0,5 10,0 20,0 5501140
3600 23MST 300/12-0,5 12,0 24,0 5501145
4500 23MST 300/15-0,5 15,0 30,0 5501150
6000 23MST 300/20-0,5 20,0 40,0 5501155
30 W/m for removing ice and snow from roofs and gutters.
Must be used control system with air temperature and moisture sensor
protecting cables to switch-on in temperature more than +5 °C.
OUTPUT Type MAPSV
[W] 25 W/m
LENGTH
[m]
Cat. No.
380 25380 15,5 2322550
450 25450 18,1 2322552
640 25640 25,8 2322554
990 25990 40,0 2322556
1150 251150 46,0 2322558
1480 251480 59,6 2322560
1900 251900 77,3 2322562
2300 252300 92,0 2322564
2700 252700 107,1 2322566
2900 252900 117,1 2322568
3700 253700 145,9 2322570
4400 254400 176,8 2322572
5700 255700 232,0 2322574
OUTPUT
[W]
Type MAPSV
30 W/m – 400 V
LENGTH
[m]
Cat. No.
730 30730 24,4 2322700
850 30850 29,0 2322702
1230 301230 40,7 2322704
1900 301900 62,4 2322706
2200 302200 72,7 2322708
2800 302800 95,2 2322710
3700 303700 120,1 2322712
4400 304400 145,5 2322714
5100 305100 171,4 2322716
5600 305600 184,3 2322718
7000 307000 233,2 2322720
8500 308500 276,8 2322722
11000 3011000 363,6 2322724
MST mats, 400 V, width 0,5 m
OUTPUT
[W]
Type MST
300 W/m2 AREA
[m2 ]
LENGTH
[m]
Cat. No.
900 40MST 300/3-0,5 3,0 6,0 5501300
1200 40MST 300/4-0,5 4,0 8,0 5501305
1800 40MST 300/6-0,5 6,0 12,0 5501310
2100 40MST 300/7-0,5 7,0 14,0 5501315
2700 40MST 300/9-0,5 9,0 18,0 5501320
3600 40MST 300/12-0,5 12,0 24,0 5501325
4200 40MST 300/14-0,5 14,0 28,0 5501330
4800 40MST 300/16-0,5 16,0 32,0 5501335
5400 40MST 300/18-0,5 18,0 36,0 5501340
6600 40MST 300/22-0,5 22,0 44,0 5501345
21
TYPE Suitability Max. loading
Floor heating in living areas Yes 30 W/m
Outdoor surface heating Yes 30 W/m
Frost protection of pipes Yes 15 W/m
Pipe heating Yes 15 W/m
Removing ice and snow from roofs and gutters Yes 30 W/m
OUTPUT Type MAPSV
[W] 30 W/m
LENGTH
[m]
Cat. No.
420 30420 14,0 2322600
500 30500 16,3 2322602
700 30700 23,6 2322604
1100 301100 35,6 2322606
1250 301250 42,3 2322608
1600 301600 55,1 2322610
2100 302100 70,0 2322612
2500 302500 84,6 2322614
2950 302950 98,0 2322616
3200 303200 106,7 2322618
4000 304000 134,9 2322620
4800 304800 162,1 2322622
6300 306300 209,9 2322624
Mats MST available also in 1m width. For easy installation the heating mat MST is provided with 1×5 m cold lead and with other
cold lead 1×5 m + lenght of the mat. Cables and mats are packing in PE foil.
DRIVEWAY
1 hardened surface, e.g. interlocking pavement
2 humidity sensor (water, snow, ice)
3 sand bed of the interlocking pavement
4 concrete board (protects the heating cable from vehicle load)
5 ECoFLooR ® MAPsV/MADPsP heating cable or MsT/MDT mat
6 fi rm gravel base (macadam)
PAVEMENT
1 hardened surface, e.g. fl oor tiling
2 humidity sensor (water, snow, ice)
3 sand fi ll and the sub-base of the cable
4 ECoFLooR ® MAPsV/MADPsP heating cable or MsT/MDT mat
5 fi rm gravel base (macadam)

MADPSP heating cable, a two-conductor cable with a full protection
screen and protection against UV radiation. Suitable for heating
outdoor surfaces. Class M2. Cold lead 1×5 m. Ø 6.2–8.9 mm.
Cables on dr. Heating circuits
TYPE
Cat. No.
(Ohm/m)
18,00 2000700
6,40 2000705
2,70 2000710
2,00 2000715
1,20 2000720
0,72 2000725
0,60 2000730
0,36 2000735
0,25 2000737
0,18 2000740
0,08 2000745
0,04 2000750
MADPSP cable, 400 V
OUTPUT
[W]
MADPSP
20 W/m
400 V
LENGTH
[m]
Cat. No.
420 20420 21,2 2323403
700 20700 35,7 2323406
1100 201100 53,9 2323409
1250 201250 64,0 2323412
1600 201600 83,3 2323415
2100 202100 105,8 2323418
2300 202300 113,7 2323421
3000 203000 143,5 2323424
3600 203600 168,7 2323425
4200 204200 202,2 2323427
6300 206300 317,5 2323430
OUTPUT
[W]
Cables and mats are packing in PE foil.
PFP – automatic heating
cable with a thermostat, electrical
socket connection, the thermostat
switches on at +3 °C, 1,5 m connection
cable with plug, IP 66
coverage.
OUTPUT
[W]
30 W/m (35 W/m for removing ice and snow from roofs and
gutters. Must be used control system with air temperature and moisture
sensor protecting cables to switch-on in temperature more than +5 °C).
OUTPUT MADPSP LENGTH
[W] 15 W/m [m]
Cat. No.
210 15210 14,0 2323153
350 15350 23,6 2323156
540 15540 36,3 2323159
630 15630 42,0 2323162
810 15810 54,4 2323165
1050 151050 70,0 2323168
1150 151150 75,2 2323171
1500 151500 95,0 2323174
1800 151800 111,3 2323175
2100 152100 133,7 2323177
3150 153150 209,9 2323180
4500 154500 255,7 2323183
MADPSP
30 W/m
400 V
LENGTH
[m]
Cat. No.
520 30520 17,1 2323453
860 30860 29,1 2323456
1330 301330 44,6 2323459
1550 301550 51,6 2323462
2000 302000 66,7 2323465
2600 302600 85,5 2323468
2800 302800 93,4 2323471
3600 303600 119,8 2323474
4500 304500 134,9 2323475
5100 305100 166,7 2323477
7700 307700 259,7 2323480
Type PFP
OUTPUT MADPSP LENGTH
[W] 20 W/m [m]
Cat. No.
240 20240 12,2 2323203
400 20400 20,7 2323206
630 20630 31,1 2323209
730 20730 36,2 2323212
950 20950 46,4 2323215
1200 201200 61,2 2323218
1300 201300 66,5 2323221
1700 201700 83,7 2323224
2000 202000 100,2 2323225
2400 202400 117,0 2323227
3600 203600 183,7 2323230
5100 205100 227,6 2323233
LENGTH
[m]
MDT mat, 230 V, width 0,5 m MDT mat, 400 V, width 0,5 m
OUTPUT
[W]
MDT
300 W/m 2
22
OUTPUT MADPSP LENGTH
[W] 25 W/m [m]
Cat. No.
270 25270 10,9 2323253
450 25450 18,4 2323256
700 25700 28,0 2323259
800 25800 33,1 2323262
1050 251050 42,0 2323265
1350 251350 54,4 2323268
1480 251480 58,5 2323271
1900 251900 74,8 2323274
2300 252300 87,2 2323275
2700 252700 103,9 2323277
4000 254000 165,3 2323280
5700 255700 203,5 2323283
AREA
[m 2 ]
LENGTH
[m]
Cat. No.
270 23MDT300/0,9–0,5 0,9 1,8 5500100
450 23MDT300/1,5–0,5 1,5 3,0 5500105
700 23MDT300/2,3–0,5 2,3 4,6 5500110
800 23MDT300/2,7–0,5 2,7 5,4 5500115
1050 23MDT300/3,5–0,5 3,5 7,0 5500120
1350 23MDT300/4,5–0,5 4,5 9,0 5500125
1480 23MDT300/5–0,5 5,0 10,0 5500130
1900 23MDT300/6,3–0,5 6,3 12,6 5500135
2300 23MDT300/7,8–0,5 7,8 15,6 5500140
4000 23MDT300/13,3–0,5 13,3 26,6 5500145
Cat. No.
12 PFP 1m/12W 1 2330150
25 PFP 2m/25W 2 2330152
36 PFP 3m/36W 3 2330154
48 PFP 4m/48W 4 2330156
72 PFP 6m/72W 6 2330158
136 PFP 10m/136W 10 2330160
152 PFP 14m/152W 14 2330162
281 PFP 21m/281W 21 2330164
337 PFP 30m/337W 30 2330166
490 PFP 42m/490W 42 2330168
TYPE Suitability Max. loading
Floor heating in living areas Yes 20 W/m
Outdoor surface heating Yes 30 W/m
Frost protection of pipes Yes 15 W/m
Pipe heating Yes 15 W/m
Removing ice and snow from roofs and gutters Yes 35 W/m
OUTPUT
[W]
OUTPUT MADPSP LENGTH
[W] 30 W/m [m]
Cat. No.
300 30300 9,8 2323303
500 30500 16,5 2323306
760 30760 25,8 2323309
880 30880 30,1 2323312
1150 301150 38,3 2323315
1500 301500 49,0 2323318
1600 301600 54,1 2323321
2100 302100 67,8 2323324
2500 302500 80,5 2323325
3000 303000 93,5 2323327
4400 304400 150,3 2323330
6300 306300 183,7 2323333
MDT
300 W/m 2
AREA
[m 2 ]
LENGTH
[m]
Cat. No.
520 40MDT300/1,8–0,5 1,8 3,6 5500200
860 40MDT300/2,9–0,5 2,9 5,8 5500205
1330 40MDT300/4,5–0,5 4,5 9,0 5500210
1550 40MDT300/5,2–0,5 5,2 10,4 5500215
2000 40MDT300/6,7–0,5 6,7 13,4 5500220
2600 40MDT300/8,7–0,5 8,7 17,4 5500225
2800 40MDT300/9,3–0,5 9,3 18,6 5500230
3600 40MDT300/12–0,5 12,0 24,0 5500235
4500 40MDT300/15–0,5 15,0 30,0 5500240
7700 40MDT300/25,7–0,5 25,7 51,4 5500245
The heating mat MDT is provided
with 1×5 m cold lead
FOOTBALL PITCH
1 grass
2 soil layer, approx. 30 cm thick
3 sand bedding, approx. 7 cm (compacted) and approx. 3 cm thick fi ll
4 ECoFLooR ® MAPsV/MADPsP heating cable or MsT/MDT mat
(approx. 20 W/m, 100 W/m 2 , cable loop spacing 20 cm)
5 Levelled solid base (grown, soil)

ADSV+ heating cable, a two-conductor cable with a full protection
screen. The sheathing of the cable is resistant
against UV radiation and is intended for fl oor
heating and the removal of snow and ice from
roofs and eaves troughs. 1×3 m cold lead.
Ø 5.0 mm.
Heating circuits
OUTPUT
[W]
Type ADSV+
10 W/m
LENGTH
[m]
Cat. No.
120 10120 11,4 2253000
200 10200 18,9 2253005
250 10250 23,6 2253010
320 10320 31,6 2253015
400 10400 36,9 2253020
450 10450 45,9 2253025
520 10520 49,6 2253030
600 10600 63,9 2253035
750 10750 75,8 2253040
950 10950 87,0 2253045
1100 101100 114,5 2253050
1300 101300 131,3 2253055
1700 101700 158,5 2253060
2000 102000 194,5 2253065
OUTPUT
[W]
Type ADSV+
18 W/m
ADPSV heating cable, a twin conductor, full protection screened
cable with protection against UV radiation. This
multipurpose cable is suitable for indoor and
outdoor applications. Class M2. Cold lead
1×5 m. Ø 5.0–5.9 mm.
Cables on drums Heating circuits
TYPE
(Ohm/m)
Cat. No.
38,72 2000500
14,02 2000505
8,96 2000510
5,232 2000515
3,58 2000520
2,568 2000525
1,714 2000535
1,382 2000540
0,926 2000550
0,638 2000555
0,424 2000560
0,31 2000565
0,196 2000570
0,136 2000575
OUTPUT
[W]
Type ADPSV
20 W/m
LENGTH
[m]
23
TYPE Suitability Max. loading
Floor heating in living areas Yes 20 W/m
Outdoor surface heating No –
Frost protection of pipes Yes 10 W/m
Pipe heating Yes 10 W/m
Removing ice and snow from roofs and gutters Yes 20 W/m
LENGTH
[m]
Cat. No.
160 18160 8,5 2253100
260 18260 14,5 2253105
320 18320 18,5 2253110
420 18420 24,0 2253115
520 18520 28,4 2253120
600 18600 34,4 2253125
680 18680 37,9 2253130
830 18830 46,1 2253135
1000 181000 57,5 2253140
1200 181200 68,9 2253145
1500 181500 83,2 2253150
1700 181700 100,4 2253155
2200 182200 122,7 2253160
2600 182600 149,6 2253165
Cat. No.
160 20160 8,3 2252800
270 20270 14,0 2252805
340 20340 17,2 2252810
450 20450 22,5 2252815
540 20540 27,4 2252820
640 20640 32,1 2252825
780 20780 39,3 2252830
870 20870 43,8 2252835
1070 201070 53,5 2252840
1290 201290 64,4 2252845
1580 201580 79,0 2252850
1850 201850 92,4 2252855
2300 202300 117,3 2252865
2750 202750 141,4 2252870
OUTPUT
[W]
PDSP heating cable, a two-conductor cable with a full protection
screen and protection against UV radiation. Suitable for heating
outdoor surfaces. Class M2. Cold lead 1×5 m. Outer cable diameter
– oval 4.5×7 mm.
TYPE Suitability Max. loading
Floor heating in living areas Yes 28 W/m
Outdoor surface heating Yes 28 W/m
Removing ice and snow from roofs and gutters Yes 28 W/m
Heating circuits
Must be used control system with air temperature and moisture sensor
protecting cables to switch-on in temperature more than +5 °C.
(Ohm/m)
OUTPUT
[W]
PDSP
28 W/m
LENGTH
[m]
Cat. No.
3,58 640 15210 23,1 2323810
2,05 890 15350 29 2323815
0,93 1270 15540 44,8 2323820
0,42 1900 15630 66,3 2323825
0,196 2700 15810 100 2323830
0,136 3400 151050 114,4 2323835
OUTPUT
[W]
STAIRS
1 wear layer (fl oor tiling)
2 fl exible bonding cement
3 ECoFLooR ® ADPsV/MAPsV/
MADPsP/PDsP heating cable
4 stairs
Type ADSV+
20 W/m
LENGTH
[m]
Cat. No.
160 20160 8,3 2253200
270 20270 14,0 2253205
340 20340 17,2 2253210
450 20450 22,5 2253215
540 20540 27,4 2253220
640 20640 32,1 2253225
720 20720 35,8 2253230
870 20870 43,8 2253235
1070 201070 53,5 2253240
1290 201290 64,4 2253245
1580 201580 79,0 2253250
1850 201850 92,4 2253255
2300 202300 117,3 2253260
2750 202750 141,4 2253265
TYPE Suitability Max. loading
Outdoor surface heating Yes 20 W/m
Frost protection of pipes Yes 10 W/m
Pipe heating Yes 10 W/m
Removing ice and snow from roofs and gutters Yes 20 W/m
Type ADPSV
10 W/m
LENGTH
[m]
Cat. No.
120 10120 11,4 2256010
200 10200 18,9 2256015
250 10250 23,6 2256020
320 10320 31,6 2256025
400 10400 36,9 2256030
450 10450 45,9 2256035
550 10550 56,1 2256040
600 10600 63,9 2256045
750 10750 75,8 2256050
950 10950 87,0 2256055
1100 101100 114,5 2256060
1300 101300 131,3 2256065
1700 101700 158,5 2256070
2000 102000 194,5 2256075
ADPsV cable.
Packing on carton reel.

SPECIAL APPLICATIONS
CONCRETE CURING CABLE CIRCUITS
A twin conductor screened cable with a 1×2 m
cold lead with plug connection. 230 V.
OUTPUT
[W]
Type PDS1P
40 W/m
LENGTH
[m]
Cat. No.
130 40130 3,3 2325000
380 40380 10,0 2325005
760 40760 19,0 2325010
1400 401400 35,0 2325018
1500 401500 38,0 2325020
3300 403300 82,0 2325030
PDS1P cable for curing
concrete. Packing in PE foil.
SELF-REGULATING CABLES
The ELSR self-regulating cables are
parallel electrical heating strips consisting
of a specially fi nished plastic with
embedded carbon particles that create
an electrical path between two parallel
copper bus bars.
Marking
Output W/m
10°C
Temperature
tolerance [°C]
Limitation for instalation
Min. temp. Min. radius
Max. length at the
temperature setting
Cat. No.
ELSR-M – Frost protection of pipe 6 A 10 A 16 A
ELSR-M – 10 BO 10 65 –30°C 35 mm 65 m 95 m 105 m 2330310
ELSR-M – 15 BO 15 65 –30°C 35 mm 37 m 58 m 65 m 2330315
ELSR-N – Frost protection of trays, gutters, roofs, technological heating 16 A 20 A 25 A
ELSR-N – 20 BO 20 80 –10°C 20 mm 94 m 116 m 146 m 2330320
ELSR-N – 30 BO 30 80 –10°C 20 mm 70 m 87 m 109 m 2330330
KIT Nr. 4 For connection and termination of self-limiting cables 5030124
Cold lead for self-regulating cables
SK 1,5 Limitation: 12 A / 20 m 2000790
SK 2,5 Limitation: 20 A / 20 m 2000795
Industrial applications:
Analyzer lines – prevent condensation
Cooling water lines – anti-freeze protection
Potable water lines – anti-freeze protection
Caustic soda – prevent crystallization
under 30 °C
24
Oils and fats – maintain pumpable viscosity
Heating oil – prevent wax dispersion
Vessel – anti-freeze and condensation
protection
PC / PC-S CABLES WITH CONSTANT LINEAR WATTAGE; PCC CIRCUITS
Cables with constant linear wattage provide a constant wattage per standard metre which enables their shortening and fi nal alterations at the
place of installation. They are suitable for applications where higher outputs and thermal resistance are required – the heating of insulation in
freezers, pipe heating, process heating, heating of compressor drainage pipes, etc.
The cable consists of two independently insulated supply conductors around which a very thin heating (resistance) wire is wound. It is connected to the supply conductors every 1 m of length
– alternately to the phase and to the working conductor. In this way, ‘heating zones’ with a length of 1 m are created. To simplify – these are one-metre long resistance cables connected
one after another in a coil. The whole structure is fi tted with a PC-S type silicon jacket, and also with a braided protective screen – termed armouring. The cable can be shortened to the
required length; the wattage per 1 m remains the same, however. WARNING: the beginning and end of the cable will not give out heat; heating occurs from the following
(preceding) heating zone! In an extreme
Protective braiding
Marking
Output Operating Temperature Length of Min. order Max. length
Cat. No.
(armouring) [W/m] temperatures resistance heating zone length of circuit
situation, if the cable is shortened immediately after
PC 25 –
the connection of the resistance wire to the conduc-
25 −50…60 °C 180 °C tor, this non-heating part can be up to 1 m long – we
therefore recommend that a minimum of 1 m
of extra cable is ordered.
1) 2330210
1 m 2 m 80 m
PC-S 25 CuSn (1 mm²) 2330212
PC 50 –
50 −50…60 °C 180 °C 1) 2330214
1 m 2 m 70 m
PC-S 50 CuSn (1 mm²) 2330216
Operating voltage 230 V / 50 Hz, dielectric strength 1 500 V, cross sectional area of the conductors 2×0.75 mm² (for 25 W/m) and 2×1.5 mm² (for 50 W/m), heating (resistance)
conductor Ni/Cr (80/20).
PCC circuits are made from braided (armoured) cable with a constant linear wattage of 30 W/m – in principle, it is the same kind of cable as
the PC-S type, but this is not sold per metre but only as fi nished
circuits of set lengths, fi tted with a connecting lead (termed
a cold lead) with a length of 1.5 m. Thanks to the silicon jacket
and the thermal resistance, they are ideal for the protection of
insulation for refrigeration equipment and freezers.
1) Thermal resistance of the cable in a switched-off state
THE D-MAT HEATING SHEET
Is intended for outdoor use as anti-freeze protection in industrial applications and in the
construction industry – for example, for
the warming of the earth in excavation
pits or of stored friable materials, the
warming of cables on reels, maintenance
of warmth in parts of
machines or in tools, etc. The
sheet is also suitable for
use in extreme winter
conditions. Technical
parameters: IP 56
coverage; heated
area 1.2×2.85 m
(3.4 m 2 ); total sheet dimensions 1.5×3.05 m; 5 m supply
lead ends in a SCHUKO plug. 230 V / 50 Hz; 9,6 kg.
Type
Output
[W]
PCC 90/3 90
Linear
wattage
Operating
temperatures
Temperature
resistance
OUTPUT
[W]
Type D-MAT
280 W/m2 Cat. No.
950 DM 3,4/280 5505000
Length
[m]
Resistance
[�]
Cat. No.
30 W/m −40…60 °C 180 °C 1)
3,0 587,8 2330250
PCC 150/5
PCC 210/7
150
210
5,0
7,0
352,7
251,9
2330252
2330254
PCC 300/10 300 10,0 176,3 2330256
Operating voltage 230 V / 50 Hz, IP 67 coverage, cable diameter 4–4.4 mm; 1×cold lead 1.5 m

ECOFLOOR ACCESSORIES
F-BOARD FLOOR INSULATION
F-boards prevent heat losses to the subfl oor structure. Recommended for fl oor reconstructions.
Type Dimensions [mm] Thickness [mm]
Packaging
[boards in packet]
Packets on the
pallet
Cat. No.
F-BOARD 6 1250×600×6 6 6 67 5442016
F-BOARD10 1250×600×10 10 6 43 5442019
Useful information
Dimensions 600 mm × 1250 mm (0,75 m 2 each)
Thickness 6 mm or 10 mm
Weight (kg/board) 1,8 (6 mm) 2,0 (10 mm)
Material
Density 32 kg/m3 Thermal Conductivity 0,029 W/m°k
Compresive strenght 300 kN/m2 Water absorption (immersion) < 1,5 % by vol
Water absorption (capillary) Nil
Co-effi cient of Linear Expansion 0,07 mm/mK
Flamibility B1
Extruded Polystyrene core with Polymer
cement outer skin
25
Quantity supplied Cat. No.
Gutter clip, 1 package = 25 pcs. Material: frost-resistant plastic. 1 package 2350000
Gutter clip 150, 1 package = 25 pcs.
Material: frost-resistant plastic, suitable for self-regulating cable.
Floor Tiles
Tile Adhesive
ECOFLOOR Mat
F-BOARD
Tile Adhesive
1 package 2350007
Downpipe clip, 1 package = 25 pcs. Material: frost-resistant plastic. 1 package 2350003
Chain, 1 package = 10 m. Material: frost-resistant plastic. 1 package 2350004
GRUFAST fastening strip, 1 unit =10 m.
Material: zinc-coated steel. Not suitable for outdoor environments.
1 unit 4200013
Plastic cable clip, 1 package = 50 pcs 1 package 1200000
Flex strip, 0.5 m length 1 2350002
T strip, 0.5 length 1 2350008
REPAIR KIT
Kit no. 1 for P1P cable repair 1 5030121
Kit no. 2 for ADSV, ASL1P Mat LD and LDTS cable repair 1 5030122
Kit no. 3 for PSV, MADPSP and ADPSV cable and mat repair 1 5030123
Kit no. 4 for connection and termination of self-limiting cables 1 5030124
Kit no. 5 for MADPSP installed under asphalt 1 5030125
OTHER ACCESSORIES
Aluminium self-adhesive tape, 50 mm width, 50 m length 1 2832515
SYFOK-B – fi xation cables for nonstandard eaves and valleys. Material: frost-resistant plastic.
B/20 (20 m)
B/10 (10 m)
2350010
2350011
SYFOK-P – fi xation cables for nonstandard eaves, gut-
P/20 (20 m) 2350012
ters and valleys. Material: frost-resistant plastic.
P/10 (10 m) 2350013
Cable spacer for 4,5 cm loops, 1 package = 25 pcs. Material: frost-resistant plastic. 1 package 2350014
C-shaped copper roof spacer, 1 package = 25 pcs 1 package 2350005
Sub-Floor – or Existing Floor
(before renovation)

®
ECOFILM
Ecofi lm heating fi lms use state of the art technology and are
primarily used for heating large surfaces. These heating systems
are composed of laminated polyester fi lms with a graphite coating,
supply leads, and accessories. We offer ECOFILM fi lms in
3 versions: underfl oor heating fi lms (“F”), ceiling fi lms (“C”) and
mirror heating fi lms.
ECOFILM set
The do-it-yourself kit for underfl oor heating may be installed easily,
quickly by following the relevant instructions. No professional
installation company required. The fi nal electrical connection
must be carried out by a qualifi ed electrician. As the Ecofi lm set
comes complete for installation, no accessories are needed. We
recommend 60 W/m 2 for a fl oating wooden fl oor and 80 W/m 2
for a fl oating laminated fl oor.
The Ecofi lm set includes:
Ecofi lm F608/55 (F606/55, 1008) electrical heating fi lm
delivered in rolls of various lengths according to the customer’s
requirements and layout plan. The heating fi lm is supplied with
insulated cut edges and cold leads.
An additional pair of insulation discs for insulating the copper
electrodes of the heating fi lm in the event that there is a requirement
to shorten the length of the heating fi lm.
Installation manual.
The fi lm is fi tted with two SK AV1.5 cold leads 3 mm in diameter
and 5 m long.
TYPE
WIDTH [mm] Output
(W/m2 TOTAL ACTIVE )
LENGTH
[m]
Total
Output
[W]
Cat. No.
Eset 60-1,5/50
600 550
60 W/m2 1,5 50 6652495
Eset 60-2/66 2 66 6652500
Eset 60-2,5/83 2,5 83 6652503
Eset 60-3/99
Eset 60-4/132
Eset 60-5/165
(230 V)
3
4
5
99
132
165
6652505
6652510
6652515
Eset 60-6/198 6 198 6652520
Eset 60-8/264 8 264 6652525
Eset 60-10/330 10 330 6652530
Eset 80-1,5/66
600 550
80 W/m2 1,5 66 6652538
Eset 80-2/88 2 88 6652540
Eset 80-2,5/110 2,5 110 6652543
Eset 80-3/132
Eset 80-4/176
Eset 80-5/220
(230 V)
3
4
5
132
176
220
6652545
6652550
6652555
Eset 80-6/264 6 264 6652560
Eset 80-8/352 8 352 6652565
Eset 80-10/440 10 440 6652570
Eset 80-1,5/117
1000 970
80 W/m2 1,5 117 6652708
Eset 80-2/156 2 156 6652710
Eset 80-2,5/195 2,5 195 6652713
Eset 80-3/234
Eset 80-4/312
Eset 80-5/390
(230 V)
3
4
5
234
312
390
6652715
6652720
6652725
Eset 80-6/468 6 468 6652730
Eset 80-8/624 8 624 6652735
Eset 80-10/780 10 780 6652740
26
heating fi lm
The F fi lm is installed directly beneath a fl oating fl oor. Due to its
ultra thin profi le (max 0,4 mm thick) the original construction height
of the fl oating fl oor is hardly affected. This silent, unobtrusive and
dry-laid underfoot heating system is highly reliable and has a long
life span. We provide a 10-year warranty for ECOFILM heating
fi lms, however their operational life can be longer (30–50 years).
The product has been tested according to European standards.
Simplifi ed Example of ECOFILM Set
Design Total surface area 4.3×3.1 m. Heating under laminated fl oor.
Recommended application: ECOFILM Set 80 W/m 2 .
Note: Heating Parts of the fi lm must not overlap and their minimal distance
from fi xtures and wall shall be 5 cm.
Owing to the following note, 3 fi lm strips (1000 mm wide) 3 m long and 2 m long and
2 fi lm strips (600 mm wide) 3 m and 2 m long may be used. For the given application it
is recommended 2×Eset 80-3/234, 1×Eset 80-3/132, 1×Eset 80-2/156 and 1×Eset
80-2/88 + temperature control.
WAGO
WAGO

ECOFILM F – underfl oor heating fi lm
Flexible Ecofi lm heating fi lm is the ideal solution for economical
electric underfl oor heating for laminated and wooden fl oating
fl oors. The product is ultrathin, yet robust, and is a dry-laid system
that is easy to install.
Easy, precise and fast installation
The heating fi lm is produced in rolls 600 mm wide (550 mm
heating surface, two 25 mm non-heating edges) and 1 000 mm
wide (970 mm heating surface, two 15 mm non-heating edges).
Thanks to its special material composition, the heating fi lm may
be cut every 10 mm to obtain exactly the required length of strips.
The strips are laid side-by-side across the entire heating surface
and are interconnected in parallel using cables with connectors.
ECOFILM F heating components must neither overlap nor cross one
another. This method of laying the fi lm saves time and especially
reduces labor costs. Installers will appreciate that the fl oating or
wooden fl oor may be laid immediately after the heating fi lm is
installed and connected.
Gentle and safe heating for your comfort
Heating fi lm makes an ideal fl oor heating system for laminated or
wooden fl oating fl oors. The technical parameters of the heating
fi lm ensure that the materials’ temperature resistance values are
observed. Health safety standards are also maintained too as
the maximum fl oor surface temperature is thermostatically limited
to 27 °C. Traditional heaters which utilise a liquid to transfer the
heat,operate at for example, signifi cantly higher temperature sand
results in a greater fl uctuation in air humidity and undesirable effects
on wooden and laminated fl oors. It is hardly surprising that
this sophisticated system has been used to safely and comfortably
heat in excess of 2,5 million m 2 of fl oors throughout Europe and
has been warmly endorsed by such leading fl oor manufacturers
as PERGO, SCANDIFLOOR, ALLOC, KÄHRS and JUNCKERS.
ECOFILM F
with accessories
Illustration photo—installation of ECOFILM F608 under fl oating fl oor
ECOFILM F connection in
parallel with Mastic
27
TYPE *
WIDTH [mm]
Output [W/m2 TOTAL ACTIVE
] Output [W/m] Cat. No.
Laminate, wood or real timber fl oor
ECOFILM F 608/55 600 550 80 44 6652302
ECOFILM F 606/55 600 550 60 33 6652301
ECOFILM F 604/55 600 550 40 22 6652300
ECOFILM F 1008 1000 970 80 78 6652310
ECOFILM F 1004 1000 970 40 22 6652308
*) delivered in roll, order accessories required for installation
Sectional view of
laminated (wooden) fl oor
(reconstruction)
1 three-layer wooden or
laminate fl oating fl oor
2 fl oor (limitation)
probe in a groove
3 PE foil covering,
0.25 mm thick
4 ECoFILM ® fl oor heating foil
5 insulation underlay from
extruded polystyrene
6 base – concrete, anhydrite,
original fl oor etc.
ideal temperature characteristic
under-fl oor heating
temperature characteristic

ECOFILM C – ceiling heating fi lm
ECOFILM C heating fi lms provide an ideal ceiling heating system
with balanced heat distribution throughout the room (without
temperature gradients). Control of the ECOFILM C’S temperature
I achieved by the use of an electronic thermostat which controls the
room temperature. As it is a radiant heating system, the same comfort
level as achieved by convection heating may be obtained at lower
temperatures. Generally, reducing the temperature by 1 °C lowers
total heating costs by 6 %.
ECOFILM C
with connected cold lead
Installation of connector cover
Illustrative photos of ECOFILM C installation on metal joists
ideal temperature characteristic
ceiling radiant heating
temperature characteristic
Installation: Crimp connector and cold lead
28
TYPE *
WIDTH [mm]
Output [W/m2 TOTAL ACTIVE
] Output [W/m] Cat. No.
ECOFILM C 420 400 300 200 60 6652102
ECOFILM C 414 400 300 140 42 6652202
ECOFILM C 520 500 400 200 80 6652210
ECOFILM C 514 500 400 140 56 6652220
ECOFILM C 510 500 400 100 40 6652225
*) delivered in roll, order accessories required for installation
Sectional view of ceiling structure
1 load-bearing ceiling structure; 2 thermal insulation; 3 CD load-bearing
sections of the plasterboard structure; 4 ECoFILM ® ceiling heating foil
5 PE foil covering, 0.25 mm thick; 6 plasterboard ceiling (fl oating)

ECOFILM MHF – mirror fogging prevention
MIRROR HEATING FILM – perfectly prevents mirror fogging
Safety operation. The Ecofi lm MHF fi lm operates at low temperatures and prevents overheating or damage
to the mirror. Installation is simple and fast. The MHF fi lm has an adhesive layer (with release backing) that
easily sticks to the rear of a mirror. The mirror heater can be wired into the electric circuit of a lighting fi xture
so that it is activated whenever the light is switched on. Considering its low input, the heating fi lms operating
costs are negligible. The ECOFILM MHF heating fi lm requires no maintenance.
ECOFILM ACCESSORIES
black
blue
Product Description Amount supplied Cat. No.
Crimp connector for Ecofi lm C and F 1 unit 6651001
Crimp cover for Ecofi lm C 1 unit 6651002
Cold lead 1,5 for Ecofi lm C 1 m 665100x
Cold lead AV 1,5 for Ecofi lm F 1 m 66510x0
Cold lead AV 2,5 for Ecofi lm F 1 m 66510x0
Crimp tool 1 unit 6651003
Insulating tape for sealing
cut edges of heating fi lm
28 mm width/33 m length
38 mm width/33 m length
29
WITH MHF WITHOUT MHF
TYPE Output [W] Dimension [mm] Cat. No.
MHF 12 12,5 274×252 6651850
MHF 25 25 274×574 6651860
MHF 50 50 524×519 6651870
MHF 100 100 524×1004 6651880
1 m cold lead, IP 44, class II
1 roll
6651026
6651028
MASTIC VM connector insulation for Ecofi lm F 38 mm width (1 connector requires 0.1 m) 1m 6651012
WAGO connector (terminal strip) for Ecofi lm set 1 unit 6651007
HEAT-PAK for the placement of ECOFILM F, ECOFILM SET heating foil under a carpet or PVC
This underlay with good thermal conductivity enables the installation of fl oor heating directly under a carpet or PVC when it
isn’t possible to place the heating cable into a screed (for example in the case of additional installation or reconstruction work).
Completely dry installation; raises the fl oor by only 10 mm. The packaging contains 8 boards (4×3 mm thick base boards and
4×4 mm thick covering boards); each of them is coated in a thin layer of adhesive. Laid in two layers, the boards are glued to
each other (staggering of joints is necessary – in this way, the joints don’t show through on the fl oor covering). A rigid, 7 mm thick
compact construction is created onto which PVC or carpet can be laid (freely or glued). Sold only as whole packages.
1 wear layer (PVC, carpet); 2 HEAT-PAK 7 mm two-layer glued underlay; 3 fl oor (limitation) probe in
the groove (embedded); 4 PE foil covering, 0.25 mm thick; 5 ECoFILM ® fl oor heating foil; 6 insulation
underlay from extruded polystyrene; 7 base – original fl oor, concrete anhydrite, etc.
Type
Thickness
[mm]
Capacity
[kg/m 3 ]
Conductivity
[W/mK]
Strength in fl exure
Dimensions of the boards
[m]
Package
[m 2 ]
Cat. No.
HEAT-PAK 7 3 and 4 770 0,07 > 40 kg / cm 2 boards 0,6×1,2 2,88 m 2 5442024
FLOOR INSULATION under wood/laminate fl oor with ECOFILM F, ECOFILM SET heating foil
1 three-layer wooden or laminate fl oating fl oor; 2 fl oor (limitation) probe in a groove;
3 PE foil covering, 0.25 mm thick; 4 ECoFILM ® fl oor heating foil; 5 insulation underlay
from extruded polystyrene; 6 base – concrete, anhydrite, original fl oor etc.
Type
Thickness
[mm]
Bulk density
[kg/m 2 ]
Thermal conductivity
coeffi cient [W/mK]
Load resistance
[t/m 2 ]
Dimensions of insulation
[m]
Package
[m 2 ]
Cat. No.
STARLON 3 3 40 0,0315 5,2 0,5×1,0 boards 5,0 5442003
STARLON 6 6 33 0,0298 6,7 0,5x1,0 boards 5,0 5442006

ULTRATHERM heating for vivariums and terrariums
In 2008 Aztec Europe Ltd. joined FENIX holding. Aztec Europe Ltd.
has its seat in Great Britain and focuses on the production of special
purpose heating elements using mainly ECOFILM foil. These products
include heating systems for vivariums and terrariums.
ULTRATHERM HEATING FILMS AND STRIPS
Viv Strip – heating strips – due to their size, Viv Strip heating strips are suitable mainly for the warming of selected areas within a vivarium
or terrarium housing specifi c types of reptile. Cold lead 2 m. IPX4, class II.
TYPE Output [W] Voltage [V] Dimensions [mm] Cat. No.
Ultratherm Viv Strip 11 11
30
230 V / 50 Hz
150×410 8510051
Ultratherm Viv Strip 15 15 150×572 8510053
Ultratherm Viv Strip 23 23 150×868 8510055
Ultratherm Viv Strip 32 32 150×1188 8510057
Viv Mat – heating foils – Viv Mat heating foils are larger than Viv Strip strips and so are used when it is necessary to heat the majority
of the area of a vivarium or terrarium. Cold lead 2 m. IPX4, class II.
TYPE Output [W] Voltage [V] Dimensions [mm] Cat. No.
Ultratherm Viv Mat 7 7
274×142 8510001
Ultratherm Viv Mat 15 15 274×276 8510003
Ultratherm Viv Mat 22 22 274×410 8510005
Ultratherm Viv Mat 30 30 230 V / 50 Hz
274×572 8510007
Ultratherm Viv Mat 39 39 274×732 8510009
Ultratherm Viv Mat 46 46 274×868 8510011
Ultratherm Viv Mat 64 64 274×1188 8510013
Happy Hamster – heating foil – due to its dimensions this heating foil is suitable for breeders of various types of rodent. Although rodents
are not primarily heat-loving animals, in the winter season they enter a certain form of winter hibernation and Happy Hamster heating foil is
ideal to help them get through this period in comfort. Cold lead 2 m. IPX4, class II.
TYPE Output [W] Voltage [V] Dimensions [mm] Cat. No.
Ultratherm Happy Hamster 8 230 V / 50 Hz 178×280 8510071

ULTRATHERM RADIANT PANELS
ULTRATHERM – radiant heating panels – these panels utilise the principle of infrared radiation and are primarily intended for the
localised heating and warming of breeding places, large terrariums or dog kennels. They are equipped with a thermal fuse which protects the
panel from overheating. It is possible to install them in a vertical position; for horizontal installation it is necessary to order mounting frames.
The standard colour is brown; white versions can be ordered and other colours are possible for an additional fee.
TYPE [W] [V] Coverage Dimensions [mm] Weight [kg] Quantity on pallet Cat. No.
Panel ULTRATHERM 100 h 100
500×320×30 2,5
Recommended height of
60 8515010
installation
Panel ULTRATHERM 200 h 200 750×320×30 3,7 The apertures used for
hanging the ULTRATHERM
45 8515015
Panel ULTRATHERM 270 h 270 230 IP 44 1000×320×30 5,2 panel are on the rear side of
the panel. For the installation
30 8515020
Panel ULTRATHERM 330 h 330 1250×320×30 6,6 of a panel in a horizontal
position it is necessary to
30 8515025
Panel ULTRATHERM 400 h 400 1500×320×30 7,9
order a ceiling frame.
30 8515030
Ceiling fi xing frame for the horizontal installation of ULTRATHERM 100 panels 5401230
Ceiling fi xing frame for the horizontal installation of ULTRATHERM 200–270 panels 5401231
Ceiling fi xing frame for the horizontal installation of ULTRATHERM 330–400 panels 5401232
CERAMIC HEATING BULBS
ULTRATHERM REGULATION
31
Ceramic heating bulbs – heating bulbs (lamps) function on the
principle of infra-red radiation – they imitate the sun’s heat radiation
and thus create conditions close to those in the natural environment.
Heating lamps have a standard screw base which fi ts normal plastic
bulb holders; however, due to the higher operating temperatures
involved, we defi nitely recommend using ceramic bulb holders. The
range, intensity and direction of the heat current can be increased using
an aluminium refl ector. Heating bulbs can be used to create different
temperature zones within a terrarium.
TYPE Output [W] Voltage [V] Cat. No.
100 W ceramic heating bulb 100
8530001
150 W ceramic heating bulb 150 230 V / 50 Hz 8530002
250 W ceramic heating bulb
250 8530003
Ceramic bulb holder for the heating bulb 8530010
AL refl ector for the heating bulb 8530015
Ultratherm Terra-Heat – this thermostat is designed for the checking
of air or soil temperature in a terrarium or vivarium. It is very simple
to use and can be connected to any Ultratherm heating foil or heat
strip, heating cable or mat, and also to other heaters available on the
market with a maximum output of up to 3 600 W.
Description Cat. No.
Settable temperature range 5–49 °C; measured temperature range
5–49 °C; accuracy: ±1 °C; input wattage 230 V, 50 Hz.
8520003

®
ECOFLEX
In convection heating, a heating body is used to warm the air which
then distributes – transfers - heat as it fl ows over the surfaces of
the objects to be heated. Most electrical convector heaters that
our fi rm distributes comes with a precise electronic thermostat, as
standard, with a contact variation of +0.5 °C.
32
convectors
ECOFLEX ET – electric convector with electronic thermostat and pilot wire, 4–5 °C setback control, 230 V/50 Hz. Colour: white.
IP 24, class II; can be installed on C and D fl ammable surfaces; needed clearance (cm): bottom edge, 15 / top edge, 15 / front side, 10
IP 24 Type [W] Dimmensions [mm] Weight [kg] Quantity on pallet Cat. No.
ECOFLEX ET 500 500 360×400×80 3,3 28 5415305
ECOFLEX ET 750 750 360×400×80 3,3 28 5415307
ECOFLEX ET 1000 1000 440×400×80 3,8 26 5415310
ECOFLEX ET 1250 1250 520×400×80 4,4 20 5415312
ECOFLEX ET 1500 1500 600×400×80 4,9 20 5415315
ECOFLEX ET 1750 1750 760×400×80 5,8 12 5415317
ECOFLEX ET 2000 2000 840×400×80 6,6 12 5415320
ECOFLEX ET 2500 2500 1000×400×80 7,6 12 5415325
ECOFLEX G – glass convector with electronic thermostat and pilot wire, 4–5 °C setback
control, 230 V/50 Hz. Available in black, red, or yellow-green.
IP 24, class II; needed clearance (cm): bottom edge, 15 / top edge, 15 / front side, 15. While stocks last.
IP 24 Type [W] Dimmensions [mm] Weight [kg] Quantity on pallet Cat. No.
ECOFLEX G 10 1 000 500×520×100 14 6 54367X0
ECOFLEX G 15 1 500 660×520×100 18 6 54367X2
ECOFLEX G 20 2 000 820×520×100 27 3 54367X4

ATLANTIC F 117 – electric convector with electronic thermostat without pilot wire, for areas not requiring
precise temperature regulation, such as stores and workshops. Colour: white with white grid.
IP 24, class II; can be installed on C and D fl ammable surfaces; needed clearance (cm): bottom edge, 15 / top edge, 15 / front side, 15
IP 24
Type [W] Dimmensions [mm] Weight [kg] Quantity on pallet Cat. No.
ATLANTIC F117-05 500 431×493×121 3,5 40 5412150
ATLANTIC F117-07 750 431×493×121 3,5 40 5412152
ATLANTIC F117-10 1000 508×493×121 3,7 34 5412154
ATLANTIC F117-12 1250 579×493×121 4,6 32 5412156
ATLANTIC F117-15 1500 654×493×121 5,3 26 5412158
ATLANTIC F117-20 2000 801×493×121 6,2 22 5412162
ATLANTIC F117-25 2500 950×493×121 7,1 18 5412164
ECOFLEX PREMIER – radiant convector with electronic thermostat and pilot wire,
3.5 °C setback control, 230 V/50 Hz. Colour: white with white grid.
IP 24, class II; needed clearance (cm): bottom edge, 15 / top edge, 10 / front side, 100
IP 24
Type [W] Dimmensions [mm] Weight [kg] Quantity on pallet Cat. No.
ECOFLEX PREMIER 1000 600×450×115 4,9 20 5435130
ECOFLEX PREMIER 1500 800×450×115 5,8 12 5435132
ECOFLEX PREMIER 2000 1000×450×115 7,7 12 5435134
SOLIUS – radiant convection heater with electronic thermostat, without a pilot wire, Usage: the convection heater
combines the advantages of infrared radiant heating (more economic operation, uniform temperature distribution) and
of convection heating (good dynamics, advantageous price/performance ratio). Also, the so-called “cold fl oor effect” is
partially eliminated in the direction in which the convection heater is emitting radiation. Colour: white casing, white grille IP
rating 24; protection class II.; 1electronic thermostat with a pilot wire; option of installation on a type C or D combustible
base; clearance distances: bottom edge 15cm / side and top edge 10 cm / front wall of the device 100 cm
IP 24
Type [W] Dimmensions [mm] Weight [kg] Quantity on pallet Cat. No.
SOLIUS 750 520×450×98 5,3 20 5435140
SOLIUS 1000 595×450×98 6,0 20 5435142
SOLIUS 1500 815×450×98 8,1 13 5435144
SOLIUS 2000 1035×450×98 10,2 11 5435146
CH 2000 B TURBO – portable convector with electromechanical thermostat
IP 20, class I; needed clearance (cm): bottom edge, 5 / top edge, 10 / front side, 5
IP 20
Type [W] Dimmensions [mm] Weight [kg] Quantity on pallet Cat. No.
CH 2000B - TURBO 750/1250/2000 580×375×110 5,0 20 5410010
33

THERMOSTATS AND CONTROLS
DIGITAL PROGRAMMING THERMOSTATS
Product Description Cat. No.
FENIX TFT
WATTS 760
Aube TH 232
FENIX Therm 350
EBERLE FIT 3U
VTM 3000
Digital touch screen thermostat; option of selecting the background colour. Operating
modes ‘fl oor only’, ‘room only’, ‘fl oor+room’; option of measurement with the help of two
external (fl oor) probes, PWM regulation or fi xed temperature difference. 4 preset and
3 user programmes (10 temperature changes in 15 minute steps, with the shortest time
period being 1 hour). Modes: according to the programme, manual mode, holiday, party,
non-freezing temperature, switched off. 16 A switching contact; range of temperature settings
5–35 °C in 0.5 °C steps; option of setting the min. and max. fl oor temperature;
calibration of sensors. A fl oor probe is included with the thermostat.
Programmable thermostat with Fuzzy-Logic option (so-called Intelligent Thermostat) or
fi xed temperature difference (settable at 0.5–7 °C). Operation modes “fl oor only”, “room
only”, “fl oor + room”. 5 preset + 2 user programmes - up to 12 temperature changes/day
with the user programmes. Room temperature setting 5–37 °C in 0.5 °C steps. Option to
set a max. and min. fl oor temperature. Setting of switched wattage for the exact correction
of the room temperature, 16 A switching contact, holiday operation, permanent temperature
mode, switch, key lock, display backlight, choice of two frames – square, round. IP 21
coverage. The back-up of data is provided by a lithium battery – the fi rst charging session
must last at least 24 hours (it is for formatting the capacity of the battery).
This digital thermostat with settable temperature readings (room only / fl oor + room /
fl oor only) is suitable for radiant panels, convection heaters and also fl oor heating. The
thermostat has a 1-week program – it is possible to switch between the comfort (‘day’) and
attenuation (‘night’) temperature up to 4 times per day. Other functions: holiday mode,
non-freezing temperature mode, option of temporary temperature adjustment, display of
current temperature, self-learning mode option (‘fuzzy logic’). IP 21 rating, 16 A switching
contact. A 3 m fl oor probe is part of the thermostat. 230 V power supply. An AC 130-03
snubber must be connected to the thermostat circuit during the switching of induction load
(e.g. when the heating is connected via a contactor) – it should be as close to the contactor
as possible, ideally directly at its contacts. Without the snubber, spontaneous resetting
of the thermostat will take place. This snubber is included with the purchased thermostat.
Programmable digital thermostat with Fuzzy-Logic (so-called Intelligent Thermostat) and
three separate functions: room and fl oor thermostat, fl oor thermostat (factory set) or room
thermostat; two preset programs, possible to use own settings. Each day can be set separately,
four events per day. Air temp. range/fl oor range 5–37 °C, 16 A, frost protection
program, IP 21, power reserve 36 hours, 230 V; equipped with a LED dual function, switch
on/off, lock, adaptive function and switch-on time (as a percentage for the last 24 hours,
7 days, 30 days or 365 days). Floor probe is part of the package.
Programmable thermostat with PWM regulation or fi xed temperature difference. Operating
modes “fl oor only”, “room only”, “fl oor + room”. 13 programmes – 9 pre-set, 4 for users (4
temperature changes per day in 30 minute steps), holiday operation, permanent temperature
or permanent attenuation modes, maintenance of a selected temperature for a set period.
Temperature settable from 5–37°C in 0.5 °C steps (fl oor and room). Option to set the max.
and min. fl oor temperature, option of probe calibration. Technical parameters: 16 A switching
contact, switch, key lock, back-lit display, automatic change to summer time. Floor probe
is part of the package. Lithium battery used for data back-up – the fi rst charging must last at
least 24 hours (formatting of the capacity of the battery), IP 30.
Selection of weekly or daily programme, selection of the modes “fl oor only”, “room only”,
“fl oor + room”. 6× daily switching between the pre-set comfort and attenuation temperatures.
Option to manually change the temperature with an automatic return to the programme.
Other functions: permanent maintenance of comfort or attenuation temperatures,
anti-freeze protection, permanent maintenance of manually set temperature (simulation of
an analogue thermostat), setting of max. and min. fl oor temperature, operating hour counter.
Data and programme back-up in the EEPROM memory (up to 10 years), time and date
back-up with the help of a large-capacity capacitor – period of back-up 6 hours. Technical
parameters: switching contact 16 A / 230 V, max. switched wattage 2 kW, key lock, fl oor
probe part of the package. IP 31.
34
4200152
4200123
4200118
4200128
4065005
4200134

ANALOG ROOM THERMOSTAT
Product Description Cat. No.
FLASH 25800 10 A, bimetallic thermostat with signaling, without temperature setback, 5–35 °C, IP 30. 4200110
EBERLE RTR - E 6124 10 A, with temperature setback 5 K, accuracy 0.5 K, 5–30 °C, IP 30. 4066020
FENIX-Therm 100
12 A, IP 21, heat differential of 0.5 °C, switch, 0–45
5–30 °C (ambient air), 5–50 °C (fl oor)
35
4200130
Frame for FENIX-Therm 100 Frame for use in wall mounting. 4200131
TH 810 T
WIRELESS REGULATION SUITABLE FOR ECOSUN, MR AND GR PANELS
BPT-SP
wireless control unit
– transmitter
SP1
wireless receiver
– fl ush-mounted
SP2
wireless receiver
– wall-mounted
SP3
wireless receiver
– socket
PH-TS 20
programmable socket
PH-CJ 37 SW
central control unit
GSM PH-GST 1 module
The outlet thermostat adjusts the outlet according to the set room temperature. Temperature
range is 5–30 °C (±1 °C). Optional mode for cooling/heating.Maximum switched current
is 16 A (3,500 W). Maximum time for backed-up operation is 3 hours. Displays both
set and current temperature in the room. Does not allow time programming. IP 20.
2–39 °C, adjustable difference of switching 0.1–1.5 °C, PI-PWM, fuzzy logic, 9 select
programmes, each programme up to six changes, option of differentiating between an
odd and even week, 255 transmitters can be connected to different addresses, simple
pairing receiver/transmitter, summer regime function, holiday, party, 2×1.5 V AA power
supply, placement on a wall or on a stand, range 35 m in buildings , up to 300 m in open
areas, frequency 433.92 MHz, option of control using a text message with the help of an
additional GSM module, GST 1, (not included in the price). IP 20.
16 A switches, 230 V power supply, IP20, receives information from BPT-SP and confi rms
the change, frequency 433.92 MHz, indication of operational status with LED diodes,
connection in mounting box.
16 A switches, 230 V power supply, IP20, receives information from BPT-SP and confi rms
the change, frequency 433.92 MHz, indication of operational status with LED diodes, to
be mounted on a wall or in mounting box.
16 A switches, 230 V power supply, IP20, receives information from BPT-SP and confi rms
the change, frequency 433.92 MHz, indication of operational status with LED diodes,
insertion into a 230 V / 16 A socket.
The PH-TS 20 socket is basically an SP3 receiver to which buttons, a display and a temperature
sensor were added so that the socket can be programmed directly and the BPT-SP
control unit is no longer needed for its operation. The PH-TS 20 programmable socket can
also communicate wirelessly with the PH-CJ 37 SW central unit, and therefore it can also
be included in the PocketHome central regulation system. IP 20.
The PH-CJ 37 SW central regulation unit is intended for the control of all BPT-SP units
in the building. Using it creates a central regulation system for the whole building. The
package also includes PocketHome software for the PC, a connecting cable for the PC’s
serial COM port and reduction to USB (RS232/USB convertor). The software enables
the programming and control of the whole regulation system to be managed signifi cantly
better and more clearly than by using the buttons and display of the PH-CJ 37 SW central
control unit. IP 20.
The GSM module is used for the remote control of the Fenix BPT-SP control unit. With the
help of text messages from your mobile phone, the temperature in the room can be regulated
or the current state of the control unit can be ascertained. SIM card is not included
in the price.
4065110
4500330
4500332
4500334
4500336
4500342
4500340
4500338

Product Description Cat. No.
INDUSTRIAL ROOM THERMOSTAT
ANALOG WALL-MOUNTED THERMOSTATS WITH INCREASED PROTECTION (IP 54)
EBERLE AZT - A 524510
EBERLE AZT - A 524410
EBERLE AZT - I - 524510
EBERLE AZT - I - 524410
CONTROLLERS FOR GUTTERING AND OUTSIDE SURFACE HEATING
Eberle EM 524 89
(one-zone)
Eberle EM 524 90
(two-zone)
Set of EBERLE sensors
for eaves troughs
Set of EBERLE
ground sensors
EBERLE DTR-E 3102
OJ Electronik
ETR/F-1447A
REGULATORS TO CONTROL ATTENUATION AND TIME PROGRAMMABLE SWITCHES
FLASH Programmer 2 SED
REGULATORS FOR REDUCTION OF MAIN CIRCUIT BREAKER VALUE
Three-phase current-load reliever – 6 modules.
BMR HJ 103
BMR HJ 306
Built-in space sensor and exterior scale. Ambient air sensor 5–35 °C, 10 A,
accuracy 1–5 K.
Built-in space sensor and exterior scale. Ambient air sensor -15–15 °C, 10 A,
accuracy 1–5 K.
Built-in space sensor and interior scale. Ambient air sensor 5–35 °C, 10 A,
accuracy 1–5 K.
Built-in space sensor and interior scale. Ambient air sensor -15–15 °C, 10 A,
accuracy 1–5 K.
Regulator for the heating of eaves troughs, downpipes and outdoor surfaces – pavements
and drives. In contrast with a manual or thermostatic controller it enables the achievement
of operational cost savings of up to 80 %. Functions: setting of temperature and humidity,
operating hours counter, alarm output, delayed switching off, current temperature indicator.
Placement on a DIN strip (8 modules), CZ menu. The presence of humidity (water,
snow or ice) and the outdoor temperature are monitored with the help of external sensors
which need to be ordered separately – for eaves troughs or free areas, depending on the
application. IP 20.
A two-zone regulator for the heating of eaves troughs, downpipes and outdoor surfaces.
The parameters and functions are the same as for the EM 524 89. However, the regulator
enables independent monitoring and control of two applications simultaneously. Basically,
these are two EM 524 89 regulators in one. Both zones require the connection of their own
set of sensors – for eaves troughs or free areas, depending on the application – and these
need to be ordered separately. IP 20.
36
4066010
4066005
4066012
4066007
4600015
4600016
Humidity (ESD 524 003) and temperature (TFD 524 004) sensor for EM 524 89 and
EM 524 90 regulators for controlling the heating of eaves troughs and downpipes. IP 65. 4600051
Humidity (ESF 524 001) and temperature (TFF 524 002) sensor for EM 524 89
and EM 524 90 regulators for controlling the heating of outdoor surfaces. IP 65.
Differential thermostat, 230 V, 1 × switching off / 1 × switching contact 16 A, 20–35 °C,
IP 65 (can be placed e.g. on the facade). While being operated it requires careful monitoring
to attain economical operation.
Differential thermostat; 230 V, 1 × switching contact 16 A, -15–10 °C, IP 20, on DIN rail
(3 modules), room sensor (IP 44) included in the price. While being operated it requires
careful monitoring to attain economical operation.
The regulator uses a pilot wire for switching between comfort and attenuation temperatures.
There is the option to divide a building into two zones and set individual weekly
programmes for each of them. A week is divided into 7 days; each day can be allocated
one of three pre-set programmes or an individual programme can be created (different for
each day). In the case of individual programming, a day is divided into 30-minute intervals.
There is the option of “holiday” operation – a temperature above freezing point (+7 °C)
is maintained for a period of 1 to 99 days, followed by a return to the programme mode.
Outputs: sinusoid 230 V / 50 Hz, positive and negative half-wave, the potential of a neutral
conductor for all types of convectors and thermostats. Dimensions 83×70×17 mm, programme
back-up 12 hours, IP 30 coverage. Placement on KU 68.
Three-level regulation with breaking for three phases, 3×3 A,
current settings of 1 to 120 A with precision to 1 A. IP 20.
Two-level regulation with separate breaking for individual phases, 6×3 A,
current settings of 1 to 120 A with precision to 1 A, size 6 modules. IP 20.
4600050
4066038
4600010
4100025
4200232
4200032

STORAGE HEATERS
1 2
3
5
1 storage bricks 2 Heating elements
3 Microtherm ® insulation 4 Charge controller
5 Bypass system 6 Wall bracket
7 Charge adjustment 8 Vermiculite insulation
9 Fan 10 Auxiliary heating element (optional)
10
* available on a special order
8
4
6
9
7
ECOSTATIC – Static Storage Heater
Basic Characteristics and Benefi ts
Manually controlled electric storage heater
Input and output adjustment according
to the required comfort
Attractively styled to suit modern home and offi ce decor
Very low lifetime maintenance
Safe, easily controllable and highly reliable
Upgraded and adjusted for use in bathrooms (IP X2)
IP 20 coverage; class I.; electromechanical thermostat for the limitation of charging + electromechanical thermostat
for the control of discharging; * the WMX 706 type is without controlling thermostats; option of installation on a C or
D fl ammable base; Needed clearance: side edges 75 mm, top edge 250 mm, front wall 300 mm
IP X2 Type Input [kW] Max. capacity [kWh] Voltage [V] Dimmensions [mm] Weight [kg] Cat. No.
WMX 706 * 0,85 6
332×700×183 41 5604706
WMX 712
WMX 718
1,70
2,55
12
18
230 ~ 50Hz
560×700×183
788×700×183
77
110
5604712
5604718
WMX 724 3,40 24 1016×700×183 140 5604724
ECODYNAMIC – Dynamic Storage Heater
Basic Characteristics and Benefi ts
Electric fan storage heater with controllable heat output according to the
Standards DIN 44574, IEC 60531 and the Safety Standard VDE 0720
Equipped with a thermomechanical charge controller (liquid fi lled)
and a thermomechanical safety controller (bimetal)
Airfl ow in two channels inside the core
One brick type for all heater models (material: magnesite MgO)
High-quality Vermiculite and Microtherm ® insulation (achieving
lower surface temperatures and better heat accumulation)
Only 25 cm deep
No start-up procedure; may be operated by user immediately after installation
Tube heating elements (special alloy steel)
Radial fl ow fan for quiet and steady heat output
Discharge controlled with an external room thermostat*
Air outlet with bimetal fl ap system for high and constant heat output (automatic)
Auxiliary heating element* installed in the air outlet area
Sheet steel casing, phosphatized and enameled; colour:
creme-white with gray-brown air outlet grill
With a wall spacer and either supporting feet* or a fl oor plate*
Protective cover* for bathrooms
IP 20 coverage; class I.; electromechanical thermostat for the limitation of charging; option of installation on a C or
D fl ammable base; Needed clearance: side and top edge 100 mm, front wall 300 mm
IP X0 Type Input [kW] Max. capacity [kWh] Voltage [V] Dimmensions [mm] Weight [kg] Cat. No.
VFMi 20
VFMi 30
VFMi 40
2,0
3,0
4,0
16
24
32
factory setting
400–3N ~ 50Hz
may be changed
626×672×250
776×672×250
926×672×250
98
137
176
5604020
5604030
5604040
VFMi 50
VFMi 60
VFMi 70
5,0
6,0
7,0
40
48
56
by a qualifi ed
technician to
230 ~ 50Hz
1076×672×250
1226×672×250
1376×672×250
215
254
293
5604050
5604060
5604070
37

ATLANTIC electric water heater
Local heating not only provides you extra comfort, it also conserves
electricity and water. Since these heaters are quite small, you can
easily build one into a kitchen counter or the cabinet under the sink.
Your kitchen’s aesthetics can thereby be preserved.
Principal characteristics and advantages
Low-volume units heat water very close to the place where it is to
be used. This eliminates the large losses typical of central hot water
sources, where pipes leading from the central boiler sap the water’s
heat as they pass through walls.
Type Capacity [l] Voltage [V] Input [W] IP protection Heating time Net weight [kg] Height [mm] Diameter [mm] Cat. No.
ATL 10 L 10
38
thermal insulation from polyurethane foam
hot water outlet pipe
enameled inner pressure tank
exchangeable magnesium anode
thermostat temperature sensor
cold water inlet
electrical heating element
removable access fl ange
thermostat
1600 IP 25 0h 24min 8 456 255 5451001
ATL 10 LU 10 2000 IP 24 0h 19min 8 456 255 5451002
ATL 50 L 50 220–240
1h 30min 16 559 433 5455001
2000
ATL 80 L 80 IP 25 2h 26min 20 791 433 5455010
ATL 150 L 150 2200 4h 36min 40 1241 505 5455030
SUPPLEMENTARY PRODUCTS
HAND DRYERS – electric hot-air units with fans for hands drying. Wall-mountable. Automatic
sensor switch ensures hygienic operation. Type ZY - 202 (metal) – while stocks last.
Type Output Switching
sensor
Air
temperature Tension
Dimension
[mm]
Weight
[kg]
Cat. No.
ZY - 203 A (plastic) 1800 W 14–18 cm 50–70°C
~ 230 V 240×240×240 2,5 5440010
ZY - 202 A (metal) 2700 W 12–18 cm 45–55°C 50 Hz 361×242×156 5,0 5440005
ELECTRIC TOWEL DRYERS are intended mainly for use in
bathrooms, washrooms, showers or kitchens for the drying of damp
towels, bath towels, tea towels etc. The installation is simple – the dryer
is attached to the wall using three plastic grips and the supply lead
is connected to a standard socket. The heating element is protected
from overheating by a thermal fuse;
the element doesn’t contain any
fi lling and therefore there is no
danger of freezing, air intake
or leakage of the liquid.
Type sTR - CR (chrome)
– while stocks last.
Output 100 W, voltage 230 V /
50 Hz, IP 44 coverage, insulation
class I., switch with a light which
signals operation, 1.6 m long straight
supply cable with a plug.
Type Colour
Width
[mm]
Height
[mm]
Depth
[mm]
Weight
[kg]
Cat. No.
STR - W white
5441006
590 662 25 3,9
STR - CR chrome 5441007
ZY - 203 A (plastic)
ZY - 202 A (metal)
TUBULAR HEATING ELEMENTS – with an electric heating insert.
Intended primarily for bathrooms – suitable for drying bath towels,
hand towels etc.
IP 65 coverage. Voltage 230 V / 50 Hz. White RAL 9016;
fi lled with non-freezing mixture, 1 m coiled connection
cable (extends to 3,5 m) with plug. Mounting brackets
are included with the product. The heating element is
without a thermostat. It can be combined with a TH 810 T
plug in thermostat.
Type Wattage Width
KD-E – fl at
[mm]
Height
[mm]
Depth
[mm] Weight
[kg]
Cat. No.
KD-E 450×960 300 450 960 90 11,5 5441402
KD-E-600×960 400 600 960 90 13,0 5441404
KD-E-450×1320 400 450 1320 90 15,8 5441406
KD-E-600×1320 600 600 1320 90 18,0 5441408
KD-E-750×1680 900 750 1680 90 27,0 5441410
KDO-E – rounded
KDO-E 450×960 300 450 960 120 11,5 5441412
KDO-E 600×960 400 600 960 120 13,0 5441414
KDO-E 450×1320 400 450 1320 120 15,8 5441416
KDO-E 600×1320 600 600 1320 120 19,0 5441418
KDO-E 750×1680 900 750 1680 120 27,0 5441420

Argentina
Armenia
Australia
Austria
Belorussia
Benelux
Bosnia and
Herzegovina
Brazil
Bulgaria
EXPORT MARKETS
Canada
Columbia
Croatia
Cyprus
Czech Republic
Denmark
Estonia
Finland
France
Georgia
Germany
Great Britain
Greece
Hungary
Chile
Iran
Ireland
Israel
Italy
Japan
Korea
Kazakhstan
Kingdom of Jordan
Latvia
Lebanon
Lithuania
Macedonia
Malta
Montenegro
Netherlands
New Zealand
Norway
Poland
Portugal
Romania
Russia
Serbia
Slovakia
Slovenia
Spain
www.fenixgroup.eu
Sweden
Switzerland
Tajikistan
Turkey
Ukraine
Uruguay
USA

HEADQUARTER
FENIX GROUP a.s.
Šárecka 37, 160 00 Praha 6, Czech Republic
E-mail: fenix@fenixgroup.cz
FENIX TRADING s.r.o.
Slezská 2, 790 01 Jeseník, Czech Republic
Tel.: +420 584 495 111, 584 495 302
Fax: +420 584 495 303
E-mail: fenix@fenixgroup.cz
PRODUCTION PLANT
FENIX s.r.o.,
Jaroslava Ježka 1338/18a
790 01 Jeseník, Czech Republic
E-mail: obchod@fenixgroup.cz
FLEXEL INTERNATIONAL LTD.
Glenrothes, Fife, Scotland
www.fl exel.co.uk
E-mail: sales@fl exel.co.uk
CEILHIT, S.L.
Poligono Industrial Cami Ral
C/Galileo 38-40, 08850 Gava, Spain
E-mail: comercial@ceilhit.es
BRANCH STORE
FENIX BOHEMIA
Vejvanov 17, 338 28 Radnice
Czech Republic
E-mail: bohemia@fenixgroup.cz
FENIX SLOVENSKO s.r.o.
Iliašská cesta 86
974 01 Bánská Bystrica, Slovakia
E-mail: fenix@fenix.sk
ACSO
11 bis, boulevard carnot – 81270
Labastide-Rouairoux, France
E-mail: acso@acso.fr
FENIX TRADING s.r.o. Slezská 2, 790 01 Jeseník, Czech Republic;
Tel.: +420 584 495 111, 584 495 302; Fax: +420 584 495 303; E-mail: fenix@fenixgroup.cz
www.fenixgroup.eu