18 December 2001 - U.S. Patent and Trademark Office

TM 2 OFFICIAL GAZETTE DEC 18, 2001
CLASS 6—METAL GOODS
FOR BUILDING MATERIALS MADE WHOLLY OR
PRIMARILY OF METAL, NAMELY, PIPES AND COU-
PLINGS AND FITTINGS THEREFOR, STAIRWAYS AND
PARTS AND FITTINGS THEREFOR, FENCES, HOT
AND COLD ROLLED SECTIONS IN TUBE, BAR, STRIP,
FLAT, SHEET, PLATE, BLOCK, ROD AND BILLET
FORM DRAINPIPES AND PARTS AND FITTINGS
THEREFOR, GRATINGS AND PARTS AND FITTINGS
THEREFOR, MANHOLE COVERS AND PARTS AND
FITTINGS THEREFOR, MANHOLE STEPS, GUTTERS,
HOPPER HEADS DOWNPIPES, HANDRAILS, ACCESS
COVERS FOR UNDERGROUND PIPEWORK AND RE-
PLACEMENT PARTS THEREFOR, FABRICATED STEEL
AND STAINLESS STEEL IN STRIP, FLAT, TUBE, BAR,
SQUARE, ROUND AND HEXAGONAL FORM, METAL
CHAINS, SHACKLES, BOLLARDS, METAL GAS TIGHT
AND FIRE PROOF DOORS AND HATCHES AND PARTS
AND FITTINGS THEREFOR; COMMON METALS AND
THEIR ALLOYS, NAMELY, STEEL, COPPER, IRON,
ALUMINUM, NICKEL, BRONZE AND BRASS IN
BLOCK SHEET, ROD, BAR AND TUBE FORM; SCRAP
METAL AND THEIR ALLOYS; METAL FASTENERS,
NAMELY, NAILS, TACKS, STAPLES, SCREWS, NUTS,
BOLTS, WASHERS, RIVETS, COTTER PINS AND
THREADED FASTENERS, METAL CABLE CLIPS AND
CABLE TRAYS, STORAGE RACKS AND RACKING
NAMELY, FRAMEWORK, CABLE SUPPORT SYSTEMS,
OVEN RACK SHELVING, DRAIN PAN CRADLES,
DRAINING BASKET, GRILLING AND TOASTING
RACKS,VALVES(U.S.CLS.2,12,13,14,23,25AND50).
CLASS 7—MACHINERY
FOR MACHINE PARTS NAMELY, PULLEY BLOCKS,
CRANE OVERHAUL BALLS, WEDGE SOCKETS, FAIR-
LEADS, SWIVELS, SHEAVES AND SHEAVE ASSEM-
BLIES; MACHINES AND MACHINE TOOLS, NAMELY,
LIFTS, WINCHES, JACKS, CRANE WEIGHTS, CHAIN
AND WIRE STOPPERS, DISH WASHERS AND GLASS
WASHERS AND PARTS AND FITTINGS FOR ALL THE
AFORESAID GOODS (U.S. CLS. 13, 19, 21, 23, 31, 34 AND
35).
CLASS 11—ENVIRONMENTAL CONTROL AP-
PARATUS
FOR APPARATUS AND INSTALLATIONS FOR STER-
ILIZING, COOKING, HEATING, WATER SUPPLY AND
SANITARY PURPOSES, NAMELY, ELECTRIC, SOLID
FUEL, OIL AND GAS FIRED OVENS AND STOVES FOR
DOMESTIC USE, HOT WATER HEATERS, CYLINDERS,
BOILERS, HEAT EXCHANGERS, SPACE HEATERS AND
SYSTEMS FOR DOMESTIC USE; ELECTRICALLY AND
GAS HEATED COMMERCIAL CATERING EQUIPMENT,
NAMELY, RANGES, OVENS, STOVES, BOILING TA-
BLES, BAINSMARIE, FRYERS, OIL FILTRATION
UNITS, GRILLS AND CHARCOAL GRILLS, BRATT
PANS, BOILING PANS, GRIDDLES, HOT CUPBOARDS,
HOT PLATES, COMBINATION UNITS OF THE AFORE-
SAID; GAS BURNERS AND COAL-FIRED BURNERS
FOR COMMERCIAL AND INDUSTRIAL USE,
SHOWERS AND SHOWER PARTS NAMELY, SHOWER
HEADS, TRAYS, CUBICLES, DOORS, PANELS,
SCREENS AND SPRAY HAND SETS; SINKS, SINK
UNITS AND STRAINERS THEREFOR; PLUMBING FIT-
TINGS, NAMELY, DRAIN TRAPS, TAPS, FAUCETS,
AND VALVES; PARTS AND FITTINGS FOR ALL THE
AFORESAID GOODS (U.S. CLS. 13, 21, 23, 31 AND 34).
CLASS 17—RUBBER GOODS
FOR PLASTIC TUBING FOR NON-MEDICAL USE;
MOLDED PLASTIC AND PLASTIC IN EXTRUDED
FORM SOLD IN BULK FOR USE IN FURTHER MAN-
UFACTURE; PLASTIC PIPES FOR INDUSTRIAL, CHE-
MICAL, BUILDING, CONSTRUCTION, CIVIL,
AGRICULTURAL AND PLUMBING APPLICATIONS
AND FITTINGS AND COUPLINGS THEREFOR; PLAS-
TIC TAPS AND PLASTIC VALVES AND PARTS AND
FITTINGS FOR ALL THESES GOODS; PLASTICS FOR
USE IN MANUFACTURE IN THE FORM OF SHEETS,
BLOCKS OR RODS; IMITATION WOOD MADE OF
PLASTIC FOR USE IN MANUFACTURE, WATER PIPES
AND DRAIN PIPES OF PLASTIC, GENERAL PURPOSE
PLUGS AND STOPPERS MADE OF RUBBER (U.S. CLS.
1, 5, 12, 13, 35 AND 50).
CLASS 19—NON-METALLIC BUILDING MA-
TERIALS
FOR PLASTIC MOLDING; IMITATION LUMBER FOR
USE AS A BUILDING MATERIAL; DRAINAGE PIPES
OF EARTHENWARE; NON-METALLIC BUILDING MA-
TERIALS, NAMELY, WINDOW FRAMES, WINDOWS,
DOOR FRAMES, DOORS, MOLDINGS, ARCHITRAVES,
SKIRTING BOARDS, FACIAL BOARDS, SOFFIT
BOARDS, BARGE BOARDS, JOISTS, SHUTTERS,
FLOORBOARDS, STAIR RAILS, BALUSTRADES, BAN-
ISTER RAILS, BOARDS, STAIRS, CLADDING, ROOF
SHINGLES, FLOOR TILES AND FLOORING, FENCING,
PANELLING, FIRE PLACE SURROUNDS, MANTEL-
PIECES AND PREFABRICATED BUILDINGS (U.S. CLS.
1, 12, 33 AND 50).
CLASS 20—FURNITURE AND ARTICLES NOT
OTHERWISE CLASSIFIED
FOR FURNITURE; CASTE IRON STREET FURNI-
TURE; MANUALLY OPERATED NON-METAL VALVES;
REMOVABLE NON-METAL COVERS FOR SINKS FOR
USE AS TEMPORARY COUNTERTOPS; NON-METAL
CABLE CLIPS AND PIPE CLIPS; COUNTERS AND
COUNTERTOPS FOR FOOD SERVICE, SHELVING
RACKS AND STORAGE SHELVES FOR FOOD SERVICE
USE; GENERAL PURPOSE PLUGS AND STOPPERS
MADE OF WOOD, WALL PLUGS USED WITH SCREWS
(U.S. CLS. 2, 13, 22, 25, 32 AND 50).
CLASS 40—MATERIAL TREATMENT
FOR MATERIAL TREATMENT IN THE NATURE OF
GROLLING, PICKLING, OILING, HEAT TREATING,
COLD STRAIGHTENING, FLATTENING, TEMPERING,
REELING, TURNING, COLD CUTTING, HARDENING,
ANNEALING, PERFORATING, PRESSING AND COAT-
ING OF METALS AND ALLOYS (U.S. CLS. 100, 103 AND
106).
CLASS 42—SCIENTIFIC, COMPUTER AND
LEGAL SERVICES
FOR COMPUTES AND COMPUTER DESIGN CON-
SULTATION SERVICES; COMPUTER PROGRAMMING;
CHEMICAL AND METALLURGICAL ANALYSIS; ME-
CHANICAL TESTING AND INSPECTION OF MATERI-
ALS, NAMELY, METALS METALLIC ALLOYS AND
PLASTICS; CRACK DETECTION, CONTAMINATION
TESTING AND FAILURE INVESTIGATION OF METALS
AND ALLOYS; ENGINEERING CONSULTATION AND
DRAFTMAN SERVICES (U.S. CLS. 100 AND 101).