Yard Crane.pmd - Bromma AB

YSX40E / YSX45E All Electric
The BROMMA YSX40E /YSX45E are all electric mid
range yard crane spreaders calculated for 2 million
cycles. Rectangular frame design enabling easy
location on containers. The electrical components and
the cable chain system are well protected inside the
main frame. The telescopic drive system consists of
an electrical motor and a reduction gearbox connected
to an endless chain system, which is fitted with a block
of springs to absorb shock loads. This enables handling
of slightly damaged containers. The system is
durable, strong, stops accurately in all positions, has
low weight, is easy to maintain and has long service
intervals.
A silent and priceworthy alternative for most
applications. A clear choice to environmentallysensitive
terminals.
• All electric
• Low maintenance needs
• High reliability with all electric
• 90% reduction of power consumption
• Environmental friendly
• Dedicated Yard Crane structure
• Bolted side guides
Yard Crane Spreader Program
Bromma yard crane spreaders are designed for use on
rubber tyred, rail-mounted yard cranes, or overhead
6
Twistlock motion achieved by an electric
motor placed inside the end beam.
Technical data
YSX40E YSX45E
Lifting Capacity
Concentric Loading 41 tonne [40 LT]
Eccentric Loading [+/- 10%] 41 tonne [40 LT]
Lifting Lugs Capacity 4 x 10 tonne
Hoisting Speed Max 1.0 m/s
Horizontal Acceleration 0.5 m/ s2 Tare Weight 5,800 Kg 6,400 Kg
Design Criteria DIN 15018 H2B4
Twistlock motion90o less than 1,0 s.
Telescoping 20’ to 40’ position ~ 22 s
Power Supply 400 VAC 50 Hz
Control Voltage 24 VDC / 230 VAC/ 110 VAC
Electrical Cabinet Stainless steel IP 55
Installed Power
Telescopic system 3.0 kW
Twistlock system 2 x 0.37 kW
Total on spreader 4.5 kW
Maximum Power Consumption 3.0 kW
This specification is subject to alterations without prior notice.
bridge cranes. Today’s yard cranes, with their higher
speeds and degrees of automation, increasingly require
heavy-duty spreaders that can absorb considerable