ROBO-SANDERâ„¢ - Luthiers Friend
ROBO-SANDERâ„¢ - Luthiers Friend
ROBO-SANDERâ„¢ - Luthiers Friend
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
collector can be made from short length of 3-4"dia. pvc<br />
pipe mounted to an overarm so that it sits directly above<br />
the drum.<br />
Caution: Never use the Robo-Sander in a router or<br />
shaper. Maximum safe operating speed is 2500 rpm.<br />
Wear eye protection. Do not touch the Robo-Sander <br />
while it is in motion. Use common sense.<br />
Trouble Shooting: If the guide wheel binds after<br />
changing sanding sleeves, disassemble and flip the<br />
washers. They can bend if overtightened.<br />
If there seems to be a lot of runout after changing<br />
sanding sleeves, Loosen things up and rotate the sleeve a<br />
half turn in relation to the rubber drum.<br />
*Note: Many hardware store sleeves are very light<br />
weight and tend to distort. Better results will occur when<br />
heavy-duty sleeves are used.<br />
I like feedback ...Please send me comments and photos of<br />
your work.