POWER TOOLS

Recommendations

Info

52 Vibration and Noise Emission Values Measuring vibrations in three directions A vibration total value is based on a vibration measurement in three directions. The value is the vector sum of the three different directions. The vector sum is always higher than one single direction. On machines intended to be used with two hands, two positions are measured and the position with the highest value is declared. There is no fixed relation between 3-axes and 1-axis values. Therefore comparisons can only be made between values referring to the same part of the same standard. Values with no reference to a standard are meaningless and can not be used for comparisons. Measurement of the vibration total value (3-axes value) with new transducer positions according to ISO 28927. Valid from 2010. � � transducer position � � Power tools may cause hand-arm vibration syndrome if their use is not adequately managed. An EU guide to managing hand-arm vibration can be found at http://www.humanvibration.com/EU/ VIBGUIDE.htm We recommend a program of health surveillance to detect early symptoms which may relate to noise or vibration exposure, so that management procedures can be modified to help prevent future impairment. All values are current as of the date of this publication. We cannot be held liable for the consequences of using the declared values, instead of values reflecting the actual exposure, in an individual risk assessment in a workplace situation over which we have no control. www.pro-powertools.com Suitable for comparison purposes only The declared values given in this table were obtained by laboratory type testing in accordance with the stated standards and are suitable for comparison with the declared values of other tools tested in accordance with the same standards. These declared values are not adequate for use in risk assessments and values measured in individual work places may be higher. The actual exposure values and risk of harm experienced by an individual user are unique and depend upon the way the user works, the workpiece and the workstation design, as well as upon the exposure time and the physical condition of the user. Measurement of the vibration value (1-axis value) with previous transducer positions according to ISO 8662. Valid until 2009. � transducer position According to the new standard ISO 28927 vibrations are measured in 3 directions both on the trigger and the support handle.The transducer positions are also moved. The new locations between thumb and index finger are chosen to avoid disturbance of the operators normal hand grip.
Vibration total value Vibration value Sound pressure levels (3 axes value) (1 axis value) and sound according to according to power levels a ISO 28927-2 ISO 8662-7 according to Valid from 2010 Value Uncer- 3-axes tainty Valid until 2009 ISO 15744 Sound Sound Value 1-axis pressure power Model m/s2 m/s2 m/s2 Impact Wrenches dB(A) dB(A) W2810 6.2 2.3 - 95 106 W2811 6.2 2.3 - 95 106 W2815 7.9 1.3 - 94 105 W2815 Pin retainer 7.9 1.3 - 94 105 W2820 7.9 1.7 - 95 106 W2309 - - 5 94 105 W2310 - - 5 94 105 W2311 - - 5 94 105 W2315 - - 6.75 94 105 W2320 - - 4.2 94 105 W2315XP-ATEX 7.3 1.8 6.75 91 116 W2320XP-ATEX 9.6 2.3 4.2 97 116 W2110 7 2.8
Page 1: Part of the Atlas Copco Group POWER
Page 4 and 5: Safe hand tool operation is a funda
Page 6 and 7: 6 Impact & Ratchet wrench selection
Page 8 and 9: 8 PRO COMPACT W2309 Square drive 7/
Page 10 and 11: 10 PRO W2110 HEX Quick change HEX C
Page 12 and 13: 12 All powerful and reversible, PRO
Page 14 and 15: 14 PRO COMPACT LINE RATCHET WRENCHE
Page 16 and 17: 16 PRO B2708 Drive 1/4” quick cha
Page 18 and 19: 18 POWER SOCKETS FOR IMPACT WRENCHE
Page 20 and 21: 20 Type Machine screw 4.8 Impact cl
Page 22 and 23: 22 PRO Slip-Clutch Screwdrivers pro
Page 24 and 25: 24 UNIVERSAL JOINTS ACCESSORIES - S
Page 26 and 27: 26 Choose the right drill for the r
Page 28 and 29: 28 PRO D2112Q Chuck capacity 1-10 m
Page 30 and 31: 30 New! Available - July 1 - 2010 A
Page 32 and 33: 32 PRO G2415 With speed governor Sp
Page 34 and 35: 34 PRO G2412 Model G2412-1 G2412-2
Page 36 and 37: 36 PRO’s range of sanding and pol
Page 38 and 39: 38 SANDERS Enjoy a complete line of
Page 40 and 41: 40 PRO G2406 Speed 2 000 r/min Outp
Page 42 and 43: 42 PRO G2301 Speed 17 000 r/min Dia
Page 44 and 45: 44 PRO P2505 Engraving Pen Blows 19
Page 46 and 47: 46 CHIPPING HAMMERS Powerful and ro
Page 48 and 49: 48 30˚ 15˚ ACCESSORIES CHIPPING H
Page 50 and 51: 50 PRO hose reels are tested to pro
Page 54 and 55: 54 Vibration total value Vibration
Page 56 and 57: 56 PRO SPARE PARTS GUIDE DRILLS Too
Page 58 and 59: a 58 Die grinders Sanders c Polishi
Page 60: www.pro-powertools.com PRO industri

POWER TOOLS

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?