Product Catalogue 2010/2011 - Trade Weld

Gun holders Order code
GH 10 6256010
GH 20 6256020
GH 30 6256030
Gun holders are primarily intended to be attached to welding machines, but they can
also be attached to transport units and welding tables.
Gas guards Order code
GG 400 6237405
GG 200/300 6237406
GG 400 regulates gas flow range 5–25 l/min. It stops the
welding automatically, if the gas pressure is not sufficient.
Cable connectors Order code Order code
Current durability A Cable mm² Male Female
200 10–25 9771650 9771626
250 35 9771671 9771628
315 50 9771670 9771627
400 70 9771680 9771629
500 95 9771630
600 95 9771681
Branch connector (1 male
and 2 female connections)
70/90 9771637
..please visit www.kemppi.com
More productivity with the arc time measuring device
Kemppi ArcTimer is a small palm-size tool that measures
actual arc burning time from any welding device. It is intended
for developing welding work-processes and improving
productivity for individual welding machines.
Kemppi ArcTimer is attached to the welding or earthing cable,
and it uses the current running in the cable to measure the
arc time. When welding starts, the device begins to record the
arc time. You can see the time on the display in hours with an
accuracy of two decimals. The arc time reading on the display
increases, until you reset the device by pushing the button
under the display.
ArcTimer Order code 6209200
Measured current range 20 – 500 A
Cable diameter mm 2 50 – 95
Minimum battery lifetime 5 years
Protection class IP23
Operating temperature -10 … +50 °C
Dimensions LxWxH, (mm) 92 x 82 x 32
Weight (g) 215
Ancillary Products
39