Stud Welding Catalog - Inventory Sales Company

STUD
WELDING
DESCRIPTION
The ARC-3000 is a fully regulated stud welding power supply that is available
in a single or dual gun version. Both versions have the constant output feature
that allows the unit to be used as a power source that can operate external
stud welding control units. An added feature in the ARC-3000 is the ability to
dial in the desired weld time and weld current before even making a weld. By
selecting the setup mode, the weld time and current can be adjusted and displayed
on the front panel digital meters.
A specially designed electronic gun control circuit has been incorporated in
this system. If a fault condition occurs due to a shorted gun solenoid or a
faulty control cable, the circuit will prevent gun retriggering and eliminate damage
to printed circuit boards. The ARC-3000 system is capable of welding
studs from 1/4" diameter to 1-1/4" diameter with preciseness and repeatability.
SPECIFICATIONS
DIMENSIONS: 36"H X 28"W X 40"D OUTPUT: 3000 AMPS @
44VDC
WEIGHT: 950 LBS. DUTY CYCLE:
INPUT: 230/460/575VAC 1/4–3/8 UNLIMITED
3 PHASE 1/2 60/MIN.
FUSING: 400/200/180 5/8 30/MIN.
DELAY TYPE 3/4 20/MIN.
HZ 60 7/8 15/MIN.
TIME CONTROL:
1" 10/MIN.
STEPLESS ADJUSTABLE .1–1.8 SEC.
CURRENT CONTROL:
STEPLESS ADJUSTABLE 400–3000 AMP.
COMPONENTS
DESCRIPTION PART NO. DESCRIPTION PART NO.
SYSTEM 100-0207 GROUND CABLE
POWER SUPPLY
25 FT. X 4/0 125-0104
SINGLE 200-0012
DUAL 200-0013 COMBO CABLE
WELD GUN 300-0600 50 FT. X 4/0 125-1002
DESCRIPTION
The ARC-1200 is a compact and portable stud welding power supply capable
of welding studs thru 5/8" diameter weld base. The fully regulated power supply
which operates on three phase power produces a smooth, stable welding
arc. Both the weld time and weld current are infinitely adjustable for preciseness
and repeatability.
For maximum flexibility the weld time can be switched between two ranges.
The expanded short time range provides fine adjustment of weld time for special
short cycle applications such as welding to thin materials.
A specially designed electronic gun control circuit has been incorporated to
increase overall reliability. If a fault condition occurs due to a shorted gun solenoid
or a faulty control cable, the circuit will prevent gun retriggering and eliminate
damage to printed circuit boards.
SPECIFICATIONS
DIMENSIONS: 27-1/2"H X 17"W X 22"D OUTPUT: 1300 AMPS
WEIGHT: 194 LBS. DUTY CYCLE:
INPUT: 230/460/575VAC 1/4 20/MIN.
3 PHASE 60 HZ 5/16 15/MIN.
FUSING: 100/60/50 3/8 13/MIN.
DELAY TYPE 1/2 8/MIN.
TIME CONTROL:
5/8 4/MIN.
STEPLESS ADJUSTABLE
CURRENT CONTROL:
RANGE A: .06–.3 SEC.
RANGE B: .1–1.0 SEC.
STEPLESS ADJUSTABLE 200–1300 AMPS
COMPONENTS
DESCRIPTION PART NO. DESCRIPTION PART NO.
SYSTEM 100-0208 25 FT. X 1/0 GROUND
POWER SUPPLY 200-0018 CABLE 125-0102
WELD GUN 300-0500 50 FT. X 1/0 COMBO
CABLE
125-1000
Stud Welding
POWER SUPPLY
ARC-3000
STUD WELDING POWER SUPPLY
Designed and built in U.S.A.
Constant current output
Single or dual gun systems
Independent gun controls
Precise weld time and weld current
adjustments
FEATURES
Digital display of actual weld time
and weld current
Diagnostic L.E.D.’s
State of the art gun control circuitry
Built in chuck saver
Auto safety shutdown
ARC-1200
STUD WELDING POWER SUPPLY
Designed and built in U.S.A.
Regulated output current
Precise weld time and weld current
adjustments
Dual time range
Short cycle capabilities
FEATURES
Diagnostic LED
State-of-the-art gun control
circuitry
Thermally protected
Built -in chuck saver
Portable
www.inventorysales.com 5