RADIK are steel panel radiators - KORADO, as

More documents

Recommendations

Info

ALLGEMEINE GENERAL INFORMATION ANGABEN Basic Equipment GENERAL INFORMATION All RADIK steel panel radiators except the model RADIK VKU and all radiators in height 200 mm have two upper and lower hangers welded on the back. Radiators with length 1800 mm and longer have six welded hangers. All radiators are equipped with an air vent and a respective number of blanking plugs. All connections of RADIK steel panel radiators have the same diameter with a G 1/2 internal thread. Except the types 10 and the models RADIK HYGIENE, RADIK HYGIENE VK, RADIK CLEAN, RADIK CLEAN VK all other models are delivered with end panels and top grills fitted. The radiators in height 200 mm are delivered with the necescessary number of “Split Brackets Plus“ designed for mounting ng on the wall. Stand brackets Z-U400 can be delivered on special cial order. Transport and storage The radiators are stored on pallets according to the manufacufacturer’s internal guidelines. Pallets with radiators should only nly be transported in covered transport. Radiators which are transported unprofessionally and incorrectly can be deformed rmed or otherwise damaged. It is especially dangerous to transport long radiators on smaller pallets or on top of radiators of a different size. Radiators must be stored where they are protected from the effects of the weather. They are not to be stored in open, uncovered areas. If they are stored on a flat floor, a maximum of two pallets of the same size may be put on top of each other. Pallets with radiators of type 10 and 11 and all types of the PLAN version may be stored only in one layer. Heat output and registration Heat outputs of the steel panel radiators RADIK were measured according to EN 442 in an accredited laboratory. Conformity with valid European regulations and standards was certified by Strojírenský zkušební ústav (Engineering Testing Institute) in Brno, notified body No. 1015. Certified registration for using national quality marks RAL (Germany), BSI (England) - see p. 96 Related norms ČSN EN 442 DIN EN 442 ČSN 06 1101 ČSN 06 1122 ČSN 06 0310 ČSN 07 7401 DIN 55 900 12 The company reserves the right to make technical changes. Packaging All steel panel radiators are delivered in uniform packaging, which consists of: • corrugated cardboard • plastic reinforcinng corners covers • polyethylene shrinking foil • strip band • inserted information sheet The packaging protects the radiator during transportation, handling, assembly and after assembly. It should not be removed before the installation and other work is completed. Packaging - pallet
Guidelines for fitting GENERAL INFORMATION Basic guidelines for the installation of steel panel radiators: • centre below a window • centre of radiator and of window at the same place • air movement around the radiator should not be restricted We offer an assortment of brackets for RADIK steel panel radiators. That assortment is shown in the KORAMONT catalogue and covers most installers needs and all main construction materials. Its construction allows fitting of the radiator with minimum damage of its packaging (at the place of fitting and connection of necessary parts) and the packaging can be removed after the completion of all construction and other work. We recommend using such fittings for the connection of steel panel radiators as will secure: • regulation of water flow through the radiator • closing off radiator at the inlet and outlet of water flow • emptying and filling of the radiator • disconnecting of radiator without interruption of the heating system operation For mounting of RADIK steel panel radiators of MM and VENTIL KOMPAKT version, we recommend to use KORADO pre-fixing template, which will supply, in every respect, radiators presence at a construction site (see KORAMONT catalogue). Guarantees and Quality The manufacturer guarantees that the product is leak proof and guarantees stated heat output of RADIK steel panel radiators connected to the hot-water systems for 10 years from the date of sale. The manufacturer accepts no responsibility for deformation or damage of the radiators caused during their transport, handling, or storage. The guarantee does not apply to mechanical or other damages caused by unqualified installation of the radiators. RADIK products guarantee the quality, as is documented by certificates issued by LGA Nürnberg (certificate on suitability of radiators for installation in schools and kindergartens) and Engineering Testing Laboratory, SZ no. 202 Brno and registration of national quality marks RAL (Germany) and BSI (England) - see p. 96. The company KORADO, a.s. has held a quality certificate under the norm ISO 9001 since 1997. That quality control system describes in advance all conditions, requirements, and parameters with respect to technical, manufacturing, commercial, transport, and service issues. The customer is the main goal of the entire system and his satisfaction influences the goals and plans of the company KORADO. The ISO 9001:2008 quality control system guarantees the customer excellent, long-lasting quality of products and services. Multifunctional package Balení – paletování The company reserves the right to make technical changes. GENERAL INFORMATION 13
Page 1 and 2: ... heat for you Steel panel radiat
Page 3 and 4: KLASIK KLASIK - Z KLASIK - R VK LIN
Page 5 and 6: COMBI VK PLAN KLASIK VKM LINE OF PR
Page 7 and 8: PLAN VERTIKAL - M MM LINE VERTIKAL
Page 9 and 10: TABLE OF CONTENTS GENERAL INFORMATI
Page 11: Technical data GENERAL INFORMATION
Page 15 and 16: Thermostatic heads GENERAL INFORMAT
Page 17 and 18: Loss of pressure Δp [kPa] Twin-pip
Page 19 and 20: GENERAL INFORMATION - VENTIL KOMPAK
Page 21 and 22: Technical Data Technické údaje KL
Page 23 and 24: 500 Fitting data Z-U140 bracket Z-U
Page 25 and 26: Technical Data Height H Length L De
Page 29 and 30: Direct electric heating COMBI VK -
Page 33 and 34: Technical Data Technické Height H
Page 37 and 38: Technical Data Height H LINE VERTIK
Page 39 and 40: Technical Data Height H Technické
Page 41 and 42: Technical Data HYGIENE Height H 303
Page 45 and 46: STEEL PANEL RADIATORS IN HEIGHT 200
Page 47 and 48: STEEL PANEL RADIATORS IN HEIGHT 200
Page 49 and 50: HEAT OUTPUT KLASIK, KLASIK - Z, VK,
Page 51 and 52: KLASIK, KLASIK - Z, VK, VK - Z ,VKU
Page 53 and 54: KLASIK, KLASIK - Z, VK, VK - Z ,VKU
Page 55 and 56: VKM HEAT OUTPUT IN WATTS CERTIFIED
Page 61 and 62: PLAN KLASIK, PLAN VK, PLAN VKL HEAT
Page 63 and 64:
PLAN KLASIK, PLAN VK, PLAN VKL HEAT
Page 65 and 66:
PLAN KLASIK, PLAN VK, PLAN VKL HEAT
Page 67 and 68:
PLAN VKM HEAT OUTPUT IN WATTS CERTI
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
MM HEAT OUTPUT IN WATTS CERTIFIED T
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
20 °C Length L [mm] 404 504 604 70
Page 81 and 82:
15 °C Length L [mm] 400 500 600 70
Page 83 and 84:
22 °C Length L [mm] 400 500 600 70
Page 85 and 86:
RADIK KLASIK - R HEAT OUTPUT IN WAT
Page 87 and 88:
Conversion of coefficients f for n
Page 89 and 90:
BASIC TECHNICAL PARAMETERS RADIK KL
Page 91 and 92:
BASIC TECHNICAL PARAMETERS RADIK PL
Page 93 and 94:
HM FITTINGS Description Connection
Page 95 and 96:
SVÚOM PRAHA - INFORMATION (I.E. ST
Page 97 and 98:
QUALITY AND SAFETY • Quality mark
Page 99 and 100:
ORDER CODE Table for creation of a
Page 101 and 102:
COLOUR CARD code 10 code 41 code 40
Page 103:
KORADO, a.s. Bří Hubálků 869 56
show all

RADIK are steel panel radiators - KORADO, as

Create successful ePaper yourself

Delete template?

Save as template?