GRAND PIANO HARDWARE AND ACCESSORIES

150
HINGES AND HARDWARE
HINGE PINS
SOLID BRASS HINGE PINS
For empire top hinges. Available in satin brass or nickel
plated. Each
Stock# Length Diameter Finish
No. 3569A 2" .150" Brass
No. 3569B 2" .150" Nickel
No. 3569C 1-3/4" .150" Brass
No. 3569D 1-3/4" .150" Nickel
No. 3569E 1-1/2" .117" Brass
No. 3569F 1-1/2" .117" Nickel
No. 3569K 1-3/4" .133" Brass
No. 3569L 1-3/4" .133" Nickel
No. 3569M 1-3/4" .104" Brass
No. 3569N 1-3/4" .104" Nickel
STEINWAY STYLE HINGE PINS
For that exact replacement that adds so much! Solid brass.
No. 3569G - Straight Ball Tip Type. 2" x .150". Each
No. 3569H - Bent Type. 2" x .140". Each
(same style as #3569A above)
PIANO BENCH HARDWARE
STEEL BENCH LEG BRACES
3-1/8” W x 2-1/2” H.
No. 577 - Each
LEG FERRULES
ID 1-1/8” W x 1-1/8” H.
No. 677 - Each
BENCH HINGES–STEEL, BRASS PLATED
Length Width
Stock # Along Pin When Open
No. 575 1-1/4" 1-1/8"
No. 575A 1-1/4" 1-3/4"
*No. 575A has unequal leaves.
LID SUPPORTS
No. 576 - Each
BENCH LEG BOLTS, LOCKWASHERS
AND NUTS
No. 1081A - 5/16" x 2". Per set of 4
No. 1081B - 5/16" x 2-1/2". Per set of 4
PLASTIC NAIL GLIDES
For piano benches and other furniture.
Silent, non-marking.
No. 1085A - 5/8" Diameter. Each
No. 1085B - 3/4" Diameter. Each
FALLBOARD & MUSIC DESK
HINGES & HARDWARE
FALLBOARD HINGES
No. 1062 - Brass. Pair
MUSIC DESK REST
HINGES
Includes fasteners.
No. 1064 - Small. Pair
No. 1065 - Large. Pair
FALLBOARD HINGES
No. 1066 - Brass. Pair
CHANNEL BRASS
Repair split or worn music desks
quickly with these brass
reinforcements. Also useful for new music
desks to prevent damage and wear. Satin brass.
No. 1092 - Grands. Pair
No. 1093 - Spinets and Consoles. Pair
FALLBOARD ROD CLAMP
Replacement for lost or broken
fallboard rod clamps.
No. 1200 - Each
UPRIGHT PIANO HARDWARE
KNIFE HINGE - Bright steel. 3-1/4”*.
Without bracket.
No. 566 - Pair
KNIFE HINGE - Bright steel. 3-1/4”*.
With bracket.
No. 566-1/2 - Pair
* Measurements are from center to center of screw holes,
when hinges are open.
TOP LID SUPPORT
For upright pianos. With
rubber cap. 4" long.
No. 560 - Each
FRONT FRAME CATCHES
No. 594 - Pair
TOP FASTENERS
Used to hold upright piano tops
securely to prevent vibration and
warping. Spring type, bronze finish.
No. 1098 - Pair
STRUT HINGE
For piano tops. Saves those broken
hinges, when top is opened completely.
Strut built into hinge supports top
in open position.
No. 1061 - 5/8” wide. Each
PANEL SPRINGS
Blue steel; 13/16” W
No. 585A - 5” long. Each