Catalogue PDF - MK Electric

92
Aspect
wiring devices | decorative www.mkelectric.co.uk
Finishes
Switch Modules
10 Amp
10 AMP
SP 1 wAy
10 AMP
DP 1 wAy
10 AMP
SP 2 wAy
10 AMP
SP 2 wAy
RETRACTIvE
SwITCH
Brushed sTAinLess sTeeL K4881BSS* K4981BSS* K4882BSS* K4885BSS*
LAcQuered Brushed sTeeL K4881LBS* K4981LBS* K4882LBS* K4885LBS*
Brushed chroMe K4881BRC* K4981BRC* K4882BRC* K4885BRC*
poLished chroMe K4881POC* K4981POC* K4882POC* K4885POC*
sATin goLd K4881SAG* K4981SAG* K4882SAG* K4885SAG*
porceLAin WhiTe K4881WHIW K4981WHIW K4882WHIW K4885WHIW
LusTrous ivorY K4881LIVW K4981LIVW K4882LIVW K4885LIVW
LusTrous BLAck K4881LBKB K4981LBKB K4882LBKB K4885LBKB
poLished BrAss K4881PBR* K4981PBR* K4882PBR* K4885PBR*
TexTured iron K4881TIRB K4981TIRB K4882TIRB K4885TIRB
deserT BronZe K4881DBZB K4981DBZB K4882DBZB K4885DBZB
AnTiQue BrAss K4881ABSB K4981ABSB K4882ABSB K4885ABSB
TexTured copper K4881TCOB K4981TCOB K4882TCOB K4885TCOB
lEAD TiMES: Please
contact our Customer
Services Department on:
01268 563 404
these switches do not have
to be derated when used with
fluorescent or inductive loads.
BS en 60669-1: 1999
these switches do not have
to be derated when used with
fluorescent or inductive loads.
BS en 60669-1: 1999
these switches do not have
to be derated when used with
fluorescent or inductive loads.
BS en 60669-1: 1999
these switches do not have
to be derated when used with
inductive loads.
note: Push switches are not
designed for fluorescent loads.
BS en 60669-1: 1999
10 AMP
SP 2 wAy
RED
RETRACTIvE
SwITCH
K4885RED
K4885REDB
* Available with the option of either white or Black inserts. Add Suffix ‘w’ or ‘B’ to part number when ordering, e.g. KxxxxBSSw.
where there is no asterix, the final suffix w = white Insert, B = Black Insert, e.g. KxxxxwhIw = Porcelain white finish with
white inserts
these switches do not have
to be derated when used with
inductive loads.
note: Push switches are not
designed for fluorescent loads.
BS en 60669-1: 1999
not available in
other finishes