Labeling systems - Iris Electronics

KM label holder (standard holder)
-40 to 140 °F
PVC
V0
Standard label holder
Label holder for wire, cable and conduit labels. They hold the characters (BK) and the ACS
labels type KS, KSO or DM. The label holders are fi xed in place with cable ties.
Type Order no. Length Width for Number of Cable ties Recommended Pack
inch (mm) inch (mm) label ident labels max. width of min. diameter qty.
plate BK23/BK30 inch (mm) inch (mm)
Labeling across the cable/conduit (A) (B) (C) (C) (C)
KM 3 86321018 0.63 (16) 0.16 (4) KS 4/12; DM 4... 6/5 0.20 (5) 0.20 (5) 2000
Labeling lengthways along the cable/conduit (A) (B) (C) (C) (C)
KM 4/23 86321020 0.91 (23) 0.16 (4) KS 4/x; DM 4... 10/7 0.20 (5) 0.20 (5) 1000
KM 4/28 86321022 1.10 (28) 0.16 (4) KS 4/x; DM 4... 12/9 0.20 (5) 0.20 (5) 1000
KM 4/31 86321024 1.22 (31) 0.16 (4) KS 4/x; DM 4... 13/10 0.20 (5) 0.20 (5) 1000
KM 4/36 86321026 1.42 (36) 0.16 (4) KS 4/x; DM 4... 15/12 0.20 (5) 0.20 (5) 1000
KM 4/45 86321028 1.77 (45) 0.16 (4) KS 4/x; DM 4... 19/15 0.20 (5) 0.20 (5) 1000
Single-line and multi-line (A) (B) (C) (C) (C)
KM 9/20 86321040 0.79 (20) 0.35 (9) KSO 20x9; DM 9... - 0.20 (5) 0.39 (10) 1000
KM 9/35 86321042 1.38 (35) 0.35 (9) KSO 35x9; DM 9... - 0.20 (5) 0.39 (10) 500
KM 15/27 86321056 1.06 (27) 0.59 (15) KS 15/27; DM 15... - 0.20 (5) 0.55 (14) 500
KM 15/49 86321058 1.93 (49) 0.59 (15) KS 15/49; DM 15... - 0.20 (5) 0.55 (14) 250
KM 15/67 86321060 2.64 (67) 0.59 (15) KS 15/67; DM 15... - 0.20 (5) 0.55 (14) 125
Pre-assembled label holders (A) (B) (C) (C) (C)
KKM 4/23 86321050 0.91 (23) 0.16 (4) KS 4/x; DM 4... 10/7 0.20 (5) 0.20 (5) 250
KM 4/23 fi tted with cable tie KB 55
KKM 9/20 86321052 0.79 (20) 0.35 (9) KSO 20x9; DM 9... - 0.20 (5) 0.39 (10) 250
KM 9/20 fi tted with cable tie KB 55
For correct size of cable tie KB see accessories
37