Q U IC K C O U P L IN G S - Fluiconnecto
Q U IC K C O U P L IN G S - Fluiconnecto
Q U IC K C O U P L IN G S - Fluiconnecto
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MQS-D<br />
MALE DIAGNOST<strong>IC</strong><br />
KEY FEATURES<br />
NEW<br />
Quick couplings purposely designed to easily access hydraulic<br />
systems for performance testing<br />
Installing male coupling in several parts of the hydraulic system,<br />
a reliable diagnosis can be carried out in short time<br />
Connection by pushing the male coupling in the female or<br />
viceversa<br />
PLUS PERFORMANCES<br />
Shaped seal guarentee sealing at low & high pressure<br />
MPa<br />
SIZE WORK<strong>IN</strong>G<br />
PRESSURE<br />
(Dynamic)<br />
MATERIAL: Couplings in steel with some stressed area hardned,<br />
carbonitred valve, springs in C98 steel, seals in Polyurethane<br />
and NBR, back-up ring PTFE.<br />
WORK<strong>IN</strong>G TEMPERATURE: -22°F up to +230°F -30°C up to +110°C<br />
(for other temperatures the quick coupling is assembled with<br />
specific seals)<br />
SAFETY FACTOR: 1:4 for dynamic pressures and 1:2 for static ones<br />
IMPULSE PRESSURES: 5 00.000 cycles (connected and disconnected<br />
conditions) at 120% of the rated one (freq.1Hz)<br />
.TEST SPECIF<strong>IC</strong>ATIONS: ISO 7241-2<br />
Disconnection by pulling back the sleeve<br />
Retaining by ball latching system<br />
Shut off system by flat valve<br />
Wide range of termination ends available on request and<br />
protective cap<br />
Interchangeability according to ISO 15171-1 and SAE J1502<br />
M<strong>IN</strong>IMUM<br />
BURST PRESSURE<br />
(MPa)<br />
mm inch dash MPa PSI<br />
MPa<br />
Male<br />
PSI<br />
5 1/8” -02 42 6090 250 36250 Allowed<br />
62 yb<br />
0<br />
35<br />
5<br />
30<br />
10<br />
���<br />
25<br />
15<br />
20<br />
CONNECTION /<br />
DISCONNECTION<br />
UNDER PRESSURE
Change language