Paint Manual - Dove-Medows Marine Coatings Ltd

Recommendations

Info

64 Topcoats MultiCoat A single component semi-gloss topcoat and primer. Ideal for all areas above the waterline requiring a semi-gloss durable topcoat. Can be applied directly to most surfaces. Provides excellent durability with good resistance to water and oil. Can also be used as a complete coating system on new or bare wood: 1st coat thinned 20%, 2nd coat thinned 5–10%, further coats undiluted. Add Anti-Slip granules for a non-slip finish. 5 o C/40 o F Minimum application temperature Temp Touch dry Re-coat (min/max) Thinner/Tool clean Covers Tools 10ºC 8–10 hrs 16 hrs – 10 days Thinner No 1 12m 2 /l 20ºC 4–5 hrs 8 hrs – 5 days Deck Coating A single component high opacity durable semi-gloss coating for deck areas. Add Anti-Slip Granules for a non-slip finish. 5 o C/40 o F Minimum application temperature Temp Touch dry Re-coat (min/max) Thinner/Tool clean Covers Tools 10ºC 8–10 hrs 16 hrs – 10 days Thinner No 1 11m 2 /l 20ºC 4–5 hrs 8 hrs – 5 days Bilge & Locker <strong>Paint</strong> A single component high opacity satin topcoat providing excellent durability, with good water and oil resistance for bilges and lockers. Not suitable for permanent immersion. 5 o C/40 o F Minimum application temperature Temp Touch dry Re-coat (min/max) Thinner/Tool clean Covers Tools 10ºC 8–10 hrs 16 hrs – 10 days Thinner No 1 11m 2 /l 20ºC 4–5 hrs 8 hrs – 5 days Anti-Slip Pearls For areas such as decks, where you need an anti-slip finish, Deck Coating, MultiCoat, Brilliant Enamel and PolyGloss – with the addition of Anti-Slip Pearls – will give an anti-slip surface that allows colour matching and coordinating with other glossed areas. Recommended mix ratio: 160g per 1.5 l 750ml 2.5l 750ml 2.5l 750ml 2.5l
Varnishes Varnish will protect wood against the elements. And – where the wood is of good quality – enhance the natural beauty of the surface. Favourite Varnish A single component alkyd based, full bodied, high gloss varnish. For use above the waterline, both inside and outside, as part of a single component system. Especially easy to use, giving a tough, durable, long-lasting finish, with depth of gloss. Ideal for areas where structural flexibility of the wood is needed. 5 o C/40 o F Minimum application temperature Temp Touch dry Re-coat (min/max) Thinner/Tool clean Covers Tools 10ºC 12 hrs 12 hrs – 4 days Thinner No 1 16m 2 /l 20ºC 6 hrs 6 hrs – 2 days Classic Varnish A single component traditional varnish produced from the highest quality materials, including tung oil. Use inside and outside above the waterline. Excellent flow at application, a flexible finish and long term UV filters ensure an uncompromising finish that will last for a long time. 5 o C/40 o F Minimum application temperature Temp Touch dry Re-coat (min/max) Thinner/Tool clean Covers Tools 10ºC 20 hrs 16 hrs – 4 days Thinner No 1 18m 2 /l 20ºC 10 hrs 8 hrs – 2 days 375ml 750ml 2.5l 375ml 750ml 2.5l 65 Varnishes
Page 1 and 2:
Paint Manual
Page 3 and 4:
Contents 2 Thank you for choosing H
Page 5 and 6:
Preparing to paint • Planning the
Page 7 and 8:
Temperature and humidity Our paints
Page 9 and 10:
Hearing Body Feet Head What are the
Page 11 and 12:
2. Cleaning and degreasing Good sur
Page 13 and 14: Wet Abrading Due to the lubricating
Page 15 and 16: Application methods and tools There
Page 17 and 18: An important part of choosing the r
Page 19 and 20: Painting advice and specifications
Page 21 and 22: Fill along boottop Fairing any defe
Page 23 and 24: Repainting all substrates Maintaini
Page 25 and 26: Painting glassfibre Glassfibre, or
Page 27 and 28: Osmosis • What is osmosis and how
Page 29 and 30: Osmosis protection When to use an o
Page 31 and 32: Osmosis treatment When to use an os
Page 33 and 34: How to apply Gel Protect for both P
Page 35 and 36: Painting ferrocement Ferrocement is
Page 37 and 38: Steel - single pack/conventional Pr
Page 39 and 40: Painting and varnishing wood Wood i
Page 41 and 42: Wood - single pack system/conventio
Page 43 and 44: Wood - varnish It is recommended to
Page 45 and 46: Painting keels Keels are made from
Page 47 and 48: Outdrives Product No of coats Recoa
Page 49 and 50: Our products • Primers and underc
Page 51 and 52: Antifouling Primer A single compone
Page 53 and 54: Gel Protect ABOVE BELOW waterline w
Page 55 and 56: Antifoulings and bottom coats Fouli
Page 57 and 58: Applying antifouling Applying boott
Page 59 and 60: Ocean Performer You will receive ul
Page 61 and 62: Mille Drive Aerosol. Mille Drive is
Page 63: Topcoats Paint will enhance the app
Page 67 and 68: Woodseal A single component a high
Page 69 and 70: Thinners It’s important you only
Page 71 and 72: Clean & Shine Concentrated wash and
Page 73 and 74: RIB Clean Powerful, concentrated, s
Page 75 and 76: Mildew Remover An easy-to-use produ
Page 77 and 78: Reference • Calculating areas to
Page 79 and 80: Overcoating information Covers Thic
Page 81 and 82: Troubleshooting The most common cau
Page 83 and 84: Technical terms Alkyd Synthetic bin
Page 85 and 86: Maintenance/ product notes Maintena
Page 87: Hempel (UK) Ltd Llantarnam Industra
show all

Paint Manual - Dove-Medows Marine Coatings Ltd

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?