Set completo de Guitarra Eléctrica + Amplificador - VisionMusic: Home

Features
- Loudspeaker size: 6.5“
- Output power: 10 Watt RMS at 4 Ohm
- Frequency range: 20 Hz to 20000 Hz
- Harmonic distortion: +/- 5 % (total)
- Signal-to-noise ratio: 70 dB
- Input sensitivity: 200 mV
- Power consumption: Max. 30 Watt
- Input voltage: 230 V / 50 Hz
- Dimensions: 285 x 255 x 150 mm
- Weight: 3850 g
Overview
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
Cable from instrument (input)
Volume control
Drive select
Gain control
Treble control
Middle tone control
Bass control
Power switch
Power connection socket
Connection sockets for external signal
sources (cinch, e.g. for CD or MP3 player)
Connection socket for headphones
Operating Elements
Volume control
This control is used to regulate the overall volume
of the guitar amplifier.
Drive select switch
This switch activates the Drive mode which distorts
the sound of the guitar.
Gain control
This control regulates the amplification factor in
Drive mode. When at a low level, the guitar amplifier
provides a clear tone (clean sound). As the
level increases, the sound becomes increasingly
distorted (dirty sound).
Treble control
This control regulates the high frequencies. The
higher the setting, the more emphatic the high
tones.
Middle tone control
This control regulates the middle frequencies. The
higher the setting, the more emphatic the middle
tones.
Bass control
This control regulates the low frequencies. The
higher the setting, the more emphatic the bass
tones.
Starting Up
Unpack the device and check that the scope of
delivery is complete.
Note: Never put the device into operation if it is
damaged. If you are in any doubt, contact the Service
department.
Therefore, check for signs of damage to the housing,
to the power adapter plug and power cable.
Damage to the packaging could indicate that the
device has been damaged during transport.
1. Set the power switch (27) to "0".
2. Turn the volume control (21) to "1".
GB
GB 23