“MINI” RGB LED LIGHT FOR SWIMMING POOL ... - AstralPool

Length (m)
Cable section
0-20 1.5 mm 2 Cu
20-30 2.5 mm 2 Cu
30-50 4 mm 2 Cu
The spotlight cable should never be changed. The supplied cable guarantees a sealing degree of IPX8. The use of a
different cable could cause a loss in sealing leading to the breakdown of the spotlight.
· Joint connection
A single link cable can be used to help in connecting the power supply with the spotlights.
For this connection method, cables with appropriate sections should be used according to their length.
Length (m)
Cable section
0-20 2.5 mm 2 Cu
20-30 4 mm 2 Cu
30-50 6 mm 2 Cu
6. CONTROL SYSTEMS OF THE LED PROJECTORS:
Installations with Mini LED spotlights only, can be controlled from the power supply itself. In installations where there are
also Colorplus spotlights, the power supply can synchronize these spotlights with the Mini LED spotlights.
6.1. Control through the power supply
The power supply is provided with a pushbutton, which is the simplest way of controlling the spotlights. Each press changes
the colour or sequence.
The pushbutton is normally closed (NC). It is connected in the terminals indicated “pushbutton input” shown in figure 9.
With this control system you have 14 function modes: 7 fixed colours and 7 sequences with different colours.
6.1.1. Diagram of the electrical connection
-4-