Turbo D

DURING OPERATIONTake care not to damagethe mains lead (e.g. bydriving over, pinching ordragging). Pull out themains plug only directly atthe plug, i.e. not bypulling at the mains lead.Before picking up liquids,the filter bag must beremoved and the functionof the float switchchecked.If foaming is observed,stop work immediatelyand empty the tank.MAINTENANCE ANDREPAIRCAUTION!Before cleaning andservicing the cleaner,always remove themains plug.Carry out onlymaintenance operationsdescribed in theseoperating instructions.Use only original Wapspare parts.Do not make anytechnical modifications tothe cleaner.CAUTION!Your safety could beendangered as a result!For all othermaintenance and repairwork, please contactthe Wap Servicedepartment or anauthorised specialistworkshop!ELECTRICALEQUIPMENTCheck the rated voltageof the cleaner beforeconnecting it to the mainspower supply. Ensurethat the voltage specifiedon the rating platecorresponds to the localmains voltage.When connected to themains power supply witha mains lead of type H 07RN-F 3G 1.5 mm², thecleaner may also be usedoutdoors.When using an extensionlead or replacing themains lead, the lead typespecified by themanufacturer must alwaysbe used.We recommend that thepower supply to thecleaner be connected viaan earth-leakage circuitbreaker which interruptsthe power supply either ifthe earth leakage currentexceeds 30 mA for 30ms, or it contains anearthing test currentcircuit.When using an extensionlead, observe theminimum cross-sections ofthe leads:Cable length Cross-sectionm mm²up to 20 1.520 to 50 2.5Always arrange thecurrent-carrying parts(plug sockets, plugs andconnectors) and layextension leads so thatthe protection class of thecleaner is maintained.CAUTION!Never spray the topsection of the cleanerwith water: Danger forpersons, danger of shortcircuits.The latest edition of theIEC Regulations must beobserved.5