2.696KB - Enermax

ENERMAX MAXREVO Series Power Supply SpecificationEMR1200EWT EMR1350EWT EMR1500EWTAC Input Voltage115-240VAC, 50-60Hz(Maximum range: 100-264VAC, 47-63Hz)AC Input Current 12.5– 5.5A 14.5 – 6.5A 15.0 – 7.5ADC OutputRated Combined Rated Combined Rated Combined3.3V 0-25A0-25A0-25A140W140W5V 0-25A 0-25A 0-25A140W12V1 0-30A0-30A0-20A12V2 0-30A 0-30A 0-20A12V3 0-30A 1200W 0-30A 1344W 0-30A 1500W12V4 0-30A (100A) 0-30A (112A) 0-30A (125A)12V5 0-30A 0-30A 0-30A12V6 0-30A 0-30A 0-30A-12V 0-0.5A 6W 0-0.5A 6W 0-0.5A 6W5Vsb 0-4A 20W 0-4A 20W 0-4A 20WTotal Power 1200W 1350W 1500WPeak Power 1440W 1620W 1650WProtection CircuitOver CurrentProtection(DC)Under Voltage /Over VoltageProtection(AC)Under VoltageProtectionOver PowerProtectionOverTemperatureProtectionShort CircuitProtectionSurge & InrushProtectionTemperatureHumidityDC RailOCP trigger range3.3V 30 – 45A5V30 – 45A12V1/2/3/4/5/640 – 50ADC Rail UVP trigger range OVP trigger range3.3V 2.0 – 2.4V 3.9 – 4.5V5V 3.3 – 3.7V 5.7 – 6.5V12V1/2/3/4/5/6 8.5 – 9.5V 13.3 – 14.5V-12V -8.5 – -9.5V -13.3 – -14.5VActivated when AC input voltage < 70VAC.Activated when output power > 110 ~160% of rated max load.Activated when PSU heat sink > 90 ~ 110 o C.Activated when any DC rails short-circuited.Sustain 2KV surge stroke.Sustain up to 70A inrush current @ 240VAC at cold start.ENVIRONMENTOperation ambient: 0~50 o CStorage ambient: -40~70 o COperation: to 85% relative humidity, non-condensing at 25 o CStorage: to 95% relative humidity, non-condensing at 50 o COTHERSMTBF> 100,000 hours at 70% of full rated load, 230VAC/50Hz, 25 o C(MIL-HDBK-217F standard)Dimension 150 (w) x 86 (h) x 180 (d) mmWeight 2.3kg (without modular cables) ±50gSafety TUV, GOST, CB, BSMIEMC CE, FCC, KCCOperation ambient: 0~40 o CStorage ambient: -40~70 o C2