NLX13KK.2 High Energy-optimized Compressor R600a 220 ... - Secop

NLX13KK.2High Energy-optimized CompressorR600a220-240V 50HzGeneralCode numberApprovals105H6300EN 60335-2-34 with Annex AACompressors on pallet 80ApplicationApplicationLBPFrequency Hz 50 60Evaporating temperature °C -35 to -10 –Voltage range V 198 - 254 –Max. condensing temperature continuous (short) °C 60 (70) –Max. winding temperature continuous (short) °C 95 (110) –Cooling requirementsFrequency Hz 50 60Application LBP MBP HBP LBP MBP HBP32°C S – – – – –38°C S – – – – –43°C S – – – – –Remarks on application:S = Static cooling normally sufficientO = Oil coolingF 1 = Fan cooling 1.5 m/s(compressor compartment temperatureequal to ambient temperature)F 2 = Fan cooling 3.0 m/s necessarySG = Suction gas cooling normally sufficent– = not applicable in this areaMotorMotor typeRSCRLRA (rated after 4 sec. UL984), HST | LST A – 4.7Cut in Current, HST | LST A – 7.8Resistance, main | start winding (25°C) Ω 14.4 27.7DesignDisplacement cm 3 13.25Oil quantity (type) cm 3 270 (polyolester)Maximum refrigerant charge g 150Free gas volume in compressor cm 3 2360Weight without electrical equipment kg 10.8DimensionsHeight mm A 203B 197B1 –B2 –Suction connector location/I.D. mm | angle C 6.2 | 15°material | comment Cu-plated steel | Al capProcess connector location/I.D. mm | angle D 6.2 | 25°material | comment Cu-plated steel | Al capDischarge connector location/I.D. mm | angle E 5.0 | 21°material | comment Cu-plated steel | Al capOil cooler connector location/I.D. mm | angle F –material | comment –Connector tolerance I.D. mm ±0.09, on 5.0 +0.12/+0.20Remarks:November 2011 DES.D.502.J1.02 1/2