battery guard #7599 - Graupner
battery guard #7599 - Graupner
battery guard #7599 - Graupner
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
EU Conformity Declaration<br />
[ BATTERY GUARD <strong>#7599</strong> ] PN.QA‐02<br />
LiPo/LiFe/LiIon LOW VOLTAGE ALARM SETTING<br />
Connect <strong>battery</strong> pack, press the TYPE button approx. 3 sec., until<br />
the buzzer stops. “Min” appears in the display, and the actual<br />
Warning voltage.<br />
CELL voltage (LiPo/LiIo/LiFe : 2.5 V ‐ 3.5 V)<br />
Set warning voltages with CELL (+)/MODE (‐) in 0.1 V/steps.<br />
Press the TYPE button again shortly, “Min Max” appears in the<br />
Display. This is to set the maximum Voltage difference between<br />
the highest and lowest cell (from 0.01 – 0.2 V).<br />
Set warning voltages with CELL (+)/MODE (‐) in 0.1 V/steps.<br />
Press the TYPE button approx. 3 sec., until the buzzer stops to<br />
save the settings.<br />
We hereby declare that the following product Battery Guard Order‐No. 7599<br />
conforms with the essential protective requirements as laid down in the directive for harmonising the statutory directives of the member states concerning electro‐magnetic interference<br />
(2004/108/EC).<br />
This product has been tested for electro‐magnetic interference in accordance with the following norms:<br />
EMC: EN 61326‐1:2006<br />
This declaration was produced by:<br />
<strong>Graupner</strong> GmbH & Co. KG<br />
Henriettenstr. 94‐96<br />
73230 Kirchheim/Teck<br />
and is valid for the manufacturer / importer of the product<br />
Stefan <strong>Graupner</strong>, Managing Director<br />
73230 Kirchheim/Teck, on 21.02.2012<br />
TYPE CELL MODE<br />
Page 5
Change language