Multi-Raboteuse MH410

More documents

Recommendations

Info

Aucune manipulation entre le dégauchissage, le rabotage et moulurage de panneaux. 2 ou 4 fers à moulurer dans l’arbre horizontal de rabotage. L'échelle de la table de rabotage est graduée en étapes de 1 et 1/10 mm. Raboteuse MH410 MH410 DESCRIPTION PRIX HORS TVA Roues blocables pour raboteuses Aspirateur à copeaux 1,5 kW Tuyau flexible, 102 mm, 3 m Tuyau flexible, 102 mm, 6 m Tuyau flexible, 102 mm, 12 m Micro ajustement de la table de sortie. La table d’entrée est très rapidement ajustable. Guide de rabotage stable et de grandes dimensions. Tables en fonte haute précision. Moteurs séparés pour le couteau et l'unité d'avancement. Protection rabotage intégrée. 3 940,00EUR 75,00EUR 530,00EUR 45,00EUR 89,00EUR 178,00EUR Mavelin s.p.r.l. WWW.MAVELIN.COM Email : info@Mavelin.com ZI de Sauvenière – Rue des Poiriers, 3 Tél.: 081 620.220 B-5030 GEMBLOUX Fax : 081 620.221 Belgique Page 4 de 9 Tél. de l’étranger : 00 32 81 620.220
MH410 ENGLISH Multi-planer MH410 Logosol’s multi-planer is a jointer, a planer and a molder in one and the same machine. Furthermore, you can use it as a vertical milling machine equipped with a feeder unit. Unleash your creativity – the possibilities are endless! No resetting between jointing, planing and molding Use the jointer on the upper machine table, and then plane two sides on the lower table, entirely without resetting! To start with, you have a perfect jointer/ planer, but it is also equipped with a side cutter. The construction is completely unique. You plane the width and thickness in one single operation. With the side cutter you can also mold the lumber. This means that you can make tongued and grooved flooring, for instance. When you are using the machine as a molder, you machine the lumber twice in order to process the work piece on all four sides. Compare this with a standard jointer/planer or a vertical milling machine, in which you have to machine the work piece at least four times. Thanks to the width of the planer table, you can use the part closest to the side cutter for molding and the other part for planing operation. This gives you a machine that does not require any resetting between jointing, planing and molding. It is this unique combination that gives you all the possibilities! The natural choice in small joinery workshops The efficiency and the precision increase dramatically when using the multi-planer instead of a traditional jointer/planer or a vertical milling machine. The reason for this is that the work piece first is machined on two sides by the jointing operation, and then it can be planed and mold on the remaining two sides in one single operation. This is of great use to you if you, for example, are producing joinery components. You do not need any extra floor space, since you at a reasonable price get both efficiency and several valuable operations in one and the same machine. Due to this the multi-planer MH410 is the natural choice for you who require high efficiency and precision. Flexible planing When delivered, the horizontal cutter is equipped with two planing knives, but the cutter can take a total of four planing knives. So, you can mount two additional knives when you want an extra fine surface finish. Normally, the two additional knife slots are used for molding knives. Even though the maximum protrusion of a molding knife in the horizontal cutter is 1/8’’ (2 mm), it is possible to produce several different profiles on the plane side of the workpiece. Mavelin s.p.r.l. WWW.MAVELIN.COM Email : info@Mavelin.com ZI de Sauvenière – Rue des Poiriers, 3 Tél.: 081 620.220 B-5030 GEMBLOUX Fax : 081 620.221 Belgique Page 5 de 9 Tél. de l’étranger : 00 32 81 620.220
Page 1 and 2: MH410 Choisissez votre langue Choos
Page 3: Une alimentation fiable MH410 Dans
Page 7 and 8: No resetting between jointing, plan
Page 9: Technische Daten Abrichthobel Abric

Multi-Raboteuse MH410

Create successful ePaper yourself

Delete template?

Save as template?