Multi-Raboteuse MH410

Reliable feeding
MH410
In its standard design the machine is equipped with two ribbed steel rollers in front of the cutter and a rubber
roller on the out-feed side. If required, the machine can be equipped with only rubber rollers. A separate
motor runs the feed rollers via a robust chain transmission, which gives a very reliable feeding. A steplessly
adjustable feeding is available as an option.
High quality gives safety and precision
The entire machine is built around the heavy cast iron table to give as high stability and durability as possible.
The machine’s simple but robust design makes it secure and easy to survey so that you can feel safe while
operating it.
Technical data
Jointing
Table width, jointer 12’’ (310
mm)
Table length, jointer 55’’ (1400
mm)
Cutting depth, jointer
0-7/16’’ (0-10 mm)
Fence size
6’’ x 43 3/8’’ (152 x 1100 mm)
Planing
Table width, planer
16’’ (410 mm)
Table length, planer
24 7/8’’ (630 mm)
Planing width Max.
16’’ (410 mm)
Planing height Max.
10 1/4’’ (260 mm)
Cutting depth, planer Max.
3/16’’ (4 mm)
Cutter head
Diameter, cutter 2 7/8’’ (72 mm)
Number of revolutions 6000 rpm
Motor 3 kW
Feeder
Diameter, feed rollers
1 5/16’’ (32 mm)
Feeding speed
Standard 19 ft 8’’/min.
Variable feeding (option)
7-39 ft/min.
Motor 0.18 kW
Weight and electric
system
Weight 540 lbs
Electric system: single phase 220V
Also available as 3-phase 400V
Thermo guards: On each motor
Mavelin s.p.r.l. WWW.MAVELIN.COM Email : info@Mavelin.com
ZI de Sauvenière – Rue des Poiriers, 3 Tél.: 081 620.220
B-5030 GEMBLOUX Fax : 081 620.221
Belgique Page 6 de 9 Tél. de l’étranger : 00 32 81 620.220