SmartCut™ - Net

Cutting matCutting mat has four cutting positions (2 each side). Whenblade does not cut cleanly, either rotate the mat or flipover to new cutting surface E. When mat has been usedcompletely on all four positions, replace it.Cutting blade replacementmCAUTION: Sharp bladeG1 F. To remove the rotary blade housing cap (2), loosenand remove the screws (1) on right hand side.2 Remove the rotary blade assembly (3); remove centerscrew (4) and separate multiblade from housing (5).Replace multiblade (5) with new multiblade.3 Re-assemble in reverse order.AccessoriesCutting Mats: A515pro - 2 Cutting mats, Part number: 2101990A525pro - 2 Cutting mats, Part number: 2101991A535pro - 2 Cutting mats, Part number: 2101992Blades: 1 Multiblade disk, Part number: 2101989 (A515pro/A525pro/A535pro)Refer to your local reseller for availability.ServiceDo not attempt to service or repair the unit yourself. If yourtrimmer is under warranty return it to the point of purchasefor replacement or repair. If your trimmer is no longerunder the point of purchase return period and requiresreplacement or repair, please contact your supplier forfurther assistance.GuaranteeOperation of this machine is guaranteed for two yearsfrom date of purchase, subject to normal use. Within theguarantee period, Rexel will at its own discretion eitherrepair or replace the defective machine free of charge.Defects due to misuse or use for inappropriate purposes arenot covered under the guarantee. Proof of date of purchaseRegister this product online at www.rexeleurope.comwill be required. Repairs or alterations made by persons notauthorised by Rexel will invalidate the guarantee. It is ouraim to ensure that our products perform to the specificationsstated. This guarantee does not affect the legal rightswhich consumers have under applicable national legislationgoverning the sale of goods.5